Introduction
This manual provides essential information for the proper use, care, and maintenance of your STANLEY Quencher H2.0 FlowState Tumbler. Designed for optimal hydration, this 30 oz tumbler features double-wall vacuum insulation and a versatile FlowState lid. Please read these instructions thoroughly before first use.
Image: Front view of the STANLEY Quencher H2.0 FlowState Tumbler in Neon Yellow, showcasing the handle and straw.
Product Features
- Double-Wall Vacuum Insulation: Keeps beverages cold for 9 hours and iced for 40 hours.
- FlowState™ 3-Position Lid: Features a rotating cover with a straw opening, a drink opening, and a full-cover top for splash resistance.
- Comfort-Grip Handle: Ergonomically designed for easy carrying.
- Cup Holder Compatible: Narrow base fits most car cup holders.
- Durable Construction: Made with 90% recycled BPA-free stainless steel.
- Dishwasher Safe: For convenient cleaning.
Image: A graphic highlighting the tumbler's features: screw-on 3-position lid, 18/8 stainless steel, BPA free, double-wall vacuum insulation, car cup holder compatible, and comfort-grip handle.
Setup
- Unpacking: Carefully remove the tumbler and all components from the packaging.
- Initial Cleaning: Before first use, wash the tumbler, lid, and straw thoroughly with warm, soapy water. Rinse completely and allow to air dry. Refer to the "Maintenance & Care" section for detailed cleaning instructions.
- Lid Assembly: Ensure the silicone gasket is properly seated within the lid for a secure, splash-resistant seal.
Image: A top-down view of the FlowState lid, showing the straw opening and the rotating cover mechanism.
Operating Instructions
- Filling the Tumbler: Remove the lid by twisting counter-clockwise. Fill the tumbler with your desired beverage. Do not overfill; leave space for the lid.
- Securing the Lid: Place the lid onto the tumbler and twist clockwise until securely fastened.
- Using the FlowState™ Lid: The lid features a rotating cover with three positions:
- Straw Opening: Rotate the cover to align with the straw opening. Insert the reusable straw. This position is designed to resist splashes.
- Drink Opening: Rotate the cover to align with the drink opening for direct sipping.
- Full-Cover Top: Rotate the cover to fully close both openings for enhanced leak resistance during transport.
- Temperature Retention: The double-wall vacuum insulation maintains beverage temperature. For best results with cold drinks, pre-chill the tumbler with ice water before filling.
Maintenance & Care
- Cleaning: The tumbler, lid, and straw are dishwasher safe. For hand washing, use warm water and mild dish soap. Use a bottle brush for thorough cleaning of the interior.
- Drying: Ensure all components are completely dry before reassembling or storing to prevent odors or mildew.
- Storage: Store the tumbler with the lid removed or slightly ajar to allow air circulation.
- Avoid Harsh Cleaners: Do not use bleach, abrasive cleaners, or scrubbers as these can damage the finish or materials.
- Microwave/Freezer Use: Do not place the tumbler in a microwave or freezer.
Troubleshooting
- Lid Leaking: Ensure the lid is securely twisted onto the tumbler. Check that the silicone gasket is properly seated and free from debris or damage.
- Reduced Temperature Retention: Verify that the lid is fully closed and sealed. Ensure the tumbler was not exposed to extreme temperatures before filling. Damage to the vacuum seal is rare but can occur; if suspected, contact customer support.
- Difficulty Cleaning: For stubborn stains or odors, a mixture of baking soda and warm water can be used. Let it sit for several hours before scrubbing and rinsing.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 10-12551-029 |
| Capacity | 30 oz (approximately 850 g) |
| Material | 90% Recycled Stainless Steel (BPA-Free) |
| Dimensions | 13.46 x 13.46 x 30.48 cm |
| Item Weight | 590 g |
| Insulation | Double-Wall Vacuum |
| Cold Retention | 9 hours |
| Iced Retention | 40 hours |
Image: A comparison graphic showing various sizes of the Stanley Quencher H2.0 Tumbler (14oz, 20oz, 30oz, 40oz, 64oz) and their respective cold and iced retention times. The 30oz model retains cold for 9 hours and iced for 40 hours.
Warranty & Support
Stanley products purchased from authorized Stanley Resellers come with a Lifetime Warranty. This warranty covers manufacturing defects and ensures your gear is built to last. For warranty claims or product support, please contact Stanley customer service directly. Keep your proof of purchase for warranty validation.
For further assistance, visit the official Stanley website or contact their customer support channels.
Image: A graphic detailing Stanley's commitment to sustainability, including 'Built for Life' warranty, recycled materials, sustainable packaging, and values-led manufacturing.