Introduction
This manual provides essential instructions for the safe and efficient operation of your THOMSON MIC300IDABBT Bluetooth Micro Hi-Fi System. Please read this manual thoroughly before using the device and retain it for future reference.
Safety Instructions
- Do not expose the unit to rain or moisture to prevent fire or electric shock.
- Ensure proper ventilation. Do not block any ventilation openings.
- Place the unit on a stable, flat surface.
- Use only attachments/accessories specified by the manufacturer.
- Unplug the unit during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel.
Product Overview
The THOMSON MIC300IDABBT is a versatile micro Hi-Fi system offering multiple audio playback options and convenient features.
Figure 1: Front view of the THOMSON MIC300IDABBT Micro Hi-Fi System, showcasing the main unit with a smartphone placed on its top surface for wireless charging, and the included remote control. The display shows 'Bluetooth Connecté' (Bluetooth Connected).
Figure 2: Close-up of the THOMSON MIC300IDABBT front panel, showing the CD tray, control buttons, and the LCD display indicating 'DISC T--001 CD 00:01', signifying CD playback.
Main Components:
- Main Unit (with integrated speakers)
- Remote Control
- Power Cable
- 3.5mm AUX-IN Cable
- Telescopic Antenna
Key Features:
- Bluetooth 5.0 for wireless audio streaming
- DAB+ and FM Radio with 50 preset stations
- CD Player (supports CD/MP3)
- USB Playback (MP3 compatible)
- AUX-IN (3.5mm jack)
- Integrated Wireless Charger (10W)
- USB Charging Port (5V-1A)
- RCA Output
- Equalizer function
- LCD Display with Time display
Setup
1. Unpacking
Carefully remove all components from the packaging. Ensure all listed items are present. Keep packaging materials for future transport or storage.
2. Power Connection
- Connect the power cable to the AC IN socket on the rear of the main unit.
- Plug the other end of the power cable into a standard 230V AC wall outlet.
3. Antenna Setup
Extend the telescopic antenna fully for optimal DAB+ and FM radio reception. Adjust its position for the best signal quality.
4. Remote Control Battery Installation
The remote control requires 2 x AAA batteries (not included). Open the battery compartment on the back of the remote control, insert the batteries according to the polarity markings, and close the compartment.
Operating Instructions
1. Power On/Off and Standby
Press the POWER button on the unit or remote control to turn the system on or off. In standby mode, the clock will be displayed.
2. Source Selection
Press the SOURCE button repeatedly on the unit or remote control to cycle through available modes: Bluetooth, CD, DAB+, FM, USB, AUX-IN.
3. Volume Control
Rotate the VOLUME knob on the unit or use the VOL+/- buttons on the remote control to adjust the sound level.
4. Bluetooth Operation
- Select Bluetooth mode. The display will show 'Bluetooth' and 'Pairing'.
- On your mobile device, enable Bluetooth and search for 'MIC300IDABBT'.
- Select 'MIC300IDABBT' to pair. Once connected, the display will show 'Bluetooth Connected'.
- You can now stream audio from your device to the Hi-Fi system.
5. CD Playback
- Select CD mode.
- Gently insert a CD into the CD slot with the label side facing up. The disc will be loaded automatically.
- Playback will begin automatically. Use the playback control buttons (Play/Pause, Skip, Stop) on the unit or remote.
6. Radio Operation (DAB+/FM)
- Select DAB+ or FM mode.
- For DAB+: The system will automatically scan for available stations on first use. Use the TUNE+/- buttons to navigate through stations.
- For FM: Press and hold TUNE+/- to auto-scan for the next available station. Press briefly to fine-tune.
- To save a preset: Tune to the desired station, press and hold the PRESET button, select a preset number using TUNE+/-, and press PRESET again to confirm.
- To recall a preset: Press the PRESET button briefly, then use TUNE+/- to select the desired preset.
7. USB Playback
- Insert a USB flash drive (FAT32 format, max 32GB) into the USB port.
- Select USB mode. The system will automatically detect and play MP3 files.
- Use playback controls to navigate tracks.
8. AUX-IN Connection
Connect an external audio device (e.g., MP3 player) to the 3.5mm AUX-IN jack using the provided cable. Select AUX-IN mode to play audio from the connected device.
9. Wireless Charging
Place a Qi-compatible smartphone on the designated wireless charging area on top of the unit. Ensure the phone is centered for optimal charging. The charging indicator on the phone will confirm charging status.
10. USB Charging
Connect a USB charging cable to the USB charging port (5V-1A) on the rear of the unit to charge compatible devices.
11. Equalizer
Press the EQ button on the remote control to cycle through different equalizer presets (e.g., Flat, Classic, Rock, Pop, Jazz).
12. Setting the Clock
In standby mode, press and hold the TIME SET button on the remote. Use the TUNE+/- buttons to adjust hours and minutes, and TIME SET to confirm each setting.
Maintenance
Cleaning
- Always unplug the unit from the power outlet before cleaning.
- Use a soft, dry cloth to clean the exterior surfaces.
- Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
Storage
If the unit is not used for an extended period, unplug it from the power source and store it in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power outlet faulty | Check power cable connection; Try a different outlet |
| No sound | Volume too low; Incorrect source selected; Mute activated | Increase volume; Select correct source; Deactivate mute |
| Bluetooth pairing fails | Device too far; Bluetooth not enabled on device; Incorrect device selected | Move device closer; Enable Bluetooth; Select 'MIC300IDABBT' |
| Poor radio reception | Antenna not extended/positioned correctly; Weak signal area | Extend and adjust antenna; Try moving the unit to a different location |
| CD not playing | CD inserted incorrectly; Disc scratched/dirty; Unsupported format | Re-insert CD correctly; Clean or replace disc; Ensure it's an audio CD or MP3 CD |
| Remote control not working | Batteries depleted/incorrectly inserted; Obstruction between remote and unit | Replace batteries; Check battery polarity; Remove obstructions |
Specifications
- Brand: Thomson
- Model Number: MIC300IDABBT
- Connectivity Technology: Bluetooth 5.0
- Supported Standards: DAB+, FM, Bluetooth, MP3, CD
- Speaker Type: Stereo
- Total Music Power: 60W (Note: Some specifications list 50W, refer to product packaging for exact rating)
- Power Source: 230V AC (Cable Electric)
- Wireless Charging Output: 10W
- USB Charging Output: 5V-1A
- Dimensions (L x W x H): Approximately 40 x 30 x 40 cm
- Item Weight: 1000 Grams
- Compatible Devices: MP3 Player, Personal Computer, Tablet, Television, Smartphone
- Color: Wood, Black
Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or contact your local Thomson service center. Keep your proof of purchase for any warranty claims.
