1. Important Safety Instructions
Read all instructions before using the appliance. Keep this manual for future reference.
- Ensure the ice maker is connected to a properly grounded electrical outlet.
- Do not operate the appliance with a damaged power cord or plug.
- Keep the ice maker away from heat sources and direct sunlight.
- Ensure adequate ventilation around the unit. Maintain at least 5 inches of space on all sides.
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Supervise children to ensure they do not play with the appliance.
- Use only potable water for ice production.
- Before cleaning or maintenance, always unplug the appliance.
2. Setup and Installation
Proper installation is crucial for optimal performance and longevity of your ice maker.
2.1 Unpacking
Carefully remove all packaging materials, including tape and protective film. Inspect the unit for any shipping damage. Retain packaging for future transport if needed.
2.2 Placement
Place the ice maker on a flat, stable surface capable of supporting its weight when full of ice and water. Ensure the location allows for proper ventilation, maintaining at least 5 inches of clearance on all sides. The unit is designed for both undercounter and freestanding use.
Image: The SOZT ice maker can be installed under a counter or used as a freestanding unit, suitable for various environments like homes, bars, cafes, and restaurants.
2.3 Water Connection
The ice maker supports dual water inlet modes: bottled water or direct faucet connection. All necessary accessories, including a water inlet hose, drain hose, water quick connector, and premium water filter, are provided.
Image: Illustration of the two water supply methods: a top-mounted bottled water dispenser or a direct connection to a faucet with an inline water filter.
- For Faucet Water Mode: Connect the water inlet hose to a potable water supply and the designated inlet on the back of the machine. Install the provided water filter in-line.
- For Bottled Water Mode: Place a compatible water bottle (e.g., 5-gallon) onto the top dispenser.
2.4 Drainage Connection
Connect the drain hose to the water outlet on the back of the machine and direct it to a suitable drain or collection bucket. The machine automatically manages water filling and draining.
Image: A close-up view of the rear connections, illustrating how to connect the water inlet hose, power cord, and water outlet hose.
3. Operating Instructions
Your SOZT ice maker features a user-friendly LCD control panel for easy operation.
3.1 Control Panel Overview
Image: The LCD control panel displays status indicators for ice making, reservation, add water, ice full, melting, stoppage, and clean, along with ON/OFF and adjustment buttons.
- ON/OFF Button: Powers the unit on or off.
- +/- Buttons: Adjust ice thickness or reservation time.
- Ice Making Indicator: Illuminates when the machine is actively producing ice.
- Reservation Indicator: Illuminates when the 24-hour reservation function is active.
- Add Water Indicator: Alerts when water supply is low.
- Ice Full Indicator: Alerts when the ice storage bin is full.
- Clean Button: Initiates the self-cleaning cycle (long press for 3 seconds).
3.2 Initial Operation
- Ensure water and drain lines are properly connected and the unit is plugged in.
- Press the ON/OFF button to start the ice making process.
- The machine will automatically fill with water and begin the first ice production cycle.
3.3 Adjusting Ice Thickness
You can adjust the ice cube thickness to suit your preference. Ice production cycles range from 6 to 15 minutes.
Image: Visual representation of ice cubes with varying thicknesses, indicating shorter cycle times for thinner ice and longer times for thicker ice.
- Use the + or - buttons on the control panel to select your desired ice thickness.
- Thin: Approximately 6 minutes per cycle, ideal for food preservation.
- Medium: Approximately 10 minutes per cycle, suitable for soft drinks.
- Thick: Approximately 15 minutes per cycle, recommended for beer and whiskey.
3.4 Reservation Function
The 24-hour reservation function allows you to schedule ice production in advance.
Image: The ice maker's display showing a '24H' reservation setting, illustrating the ability to program ice production for convenience.
- Press the Reservation button and use the + or - buttons to set the desired delay time (up to 24 hours) before ice production begins.
4. Maintenance
Regular maintenance ensures hygienic ice production and extends the life of your appliance.
4.1 Automatic Self-Cleaning
The ice maker features an automatic self-cleaning function.
Image: A close-up of the control panel highlighting the 'Clean' button, indicating the automatic cleaning feature for streamlined maintenance.
- To start the automatic cleaning cycle, long press the Clean button for 3 seconds.
- The machine will perform a cleaning cycle, flushing water through its internal components.
- Ensure the drain hose is properly positioned to collect the flushed water.
4.2 Manual Cleaning
For thorough cleaning, especially after prolonged periods of non-use:
- Unplug the ice maker from the power outlet.
- Remove the ice basket and clean it with mild detergent and warm water. Rinse thoroughly.
- Clean the interior walls of the water tank and ice storage bin with a soft cloth and mild, food-safe cleaning solution. Rinse with clean water.
- Ensure all components are dry before reassembling and restarting the machine.
4.3 Water Filter Replacement
If using the faucet water inlet with the included water filter, replace the filter periodically according to the manufacturer's recommendations or if you notice a decrease in water quality or ice production efficiency.
5. Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker not producing ice. | No power; insufficient water; ambient temperature too high. | Check power connection; ensure water supply is adequate (check 'Add Water' indicator); operate in a cooler environment. |
| 'Add Water' indicator is on. | Water tank is empty or water supply is interrupted. | Refill water bottle or check faucet water connection. |
| 'Ice Full' indicator is on. | Ice storage bin is full. | Remove ice from the storage bin. |
| Ice cubes are stuck together or in a slab. | Ice thickness setting too high; ice not harvested properly. | Adjust ice thickness to a thinner setting; gently break up ice with the provided scoop. |
| Unusual noise during operation. | Normal compressor operation; loose parts; unit not level. | Ensure unit is on a level surface; if noise persists or is excessive, contact customer support. |
6. Specifications
Key technical specifications for the SOZT Commercial Ice Maker Machine SLM36T.
| Feature | Specification |
|---|---|
| Brand | SOZT |
| Model Name | SLM36T |
| Product Dimensions | 13.5"D x 13.2"W x 26.4"H |
| Ice Storage Capacity | 20 Pounds |
| Ice Production per Day | 100 Pounds |
| Wattage | 235 watts |
| Voltage | 115 Volts (AC) |
| Material | Stainless Steel |
| Item Weight | 42.9 pounds |
7. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or contact the manufacturer directly. Specific warranty terms and conditions may vary.
