1. Introduction
This manual provides comprehensive instructions for the PerGar SRS Reset Scanner Airbag Scan Reset Tool, Model B800. This device is designed to diagnose and reset the Supplemental Restraint System (SRS) airbag warning light in compatible vehicles. It allows users to read SRS fault codes, identify issues, and clear the airbag light from the dashboard.
Key Features:
- Compatibility: Specifically designed for a wide range of BMW vehicles, including E36, E46, E34, E38, E39, Z3, Z4, and X5 series (Saloon, Coupe, Compact, Convertible, Touring models). Users should verify vehicle compatibility before use.
- Functionality: Capable of reading all SRS fault codes and resetting the dashboard SRS airbag light within seconds.
- Durability: Constructed from high-quality ABS material for long-lasting performance.
- Ease of Use: Features a user-friendly interface for straightforward operation.
Image 1.1: The PerGar SRS Reset Scanner Airbag Scan Reset Tool, showing the main unit and connection cables.
2. Package Contents
Upon opening the package, please ensure all the following items are present:
- PerGar SRS Reset Scanner (Main Unit)
- OBD-II Connector Cable
- 20-Pin Diagnostic Connector Cable (for older BMW models)
- User Manual (this document)
Image 2.1: The PerGar SRS Reset Scanner with its two primary diagnostic cables: the standard OBD-II connector and the round 20-pin connector for older BMW models.
3. Setup and Connection
Follow these steps to properly connect the PerGar SRS Reset Scanner to your vehicle:
- Prepare the Vehicle: Ensure the vehicle's ignition key is turned to the "ON" position, but do not start the engine. The engine must remain off during the diagnostic process.
- Locate Diagnostic Port: Identify the diagnostic port in your vehicle.
- For newer BMW models (typically post-2000), this is usually a 16-pin OBD-II port located under the dashboard, near the steering column.
- For older BMW models (typically pre-2000), this may be a round 20-pin diagnostic port, often found under the hood or in the engine bay.
- Connect the Tool: Plug the appropriate diagnostic cable from the PerGar SRS Reset Scanner into your vehicle's diagnostic port.
Image 3.1: Close-up of the 16-pin OBD-II diagnostic connector.
Image 3.2: Close-up of the round 20-pin diagnostic connector for older BMW models.
- Power On: Once connected, the tool should power on automatically and display "P.A." or "Revenue" on its screen. If an error occurs, keep the tool connected for at least 1 second.
Image 3.3: Rear view of the PerGar SRS Reset Scanner, showing basic connection and operation instructions printed on the device.
4. Operating Instructions
After successful connection and power-on, the PerGar SRS Reset Scanner is ready for operation. The device features an "ENTER" button and a "SCROLL" button for navigation and selection.
Image 4.1: The PerGar SRS Reset Scanner held in hand, connected to a vehicle's diagnostic port, ready for operation.
The primary functions of this tool are to read and clear SRS airbag fault codes. Use the "ENTER" button to select from the available functions displayed on the screen.
- Reading Airbag Faults:
Once the tool is powered on and connected, it will typically display options. Use the "SCROLL" button (if available, or if the device cycles through options automatically) to navigate to the "Read Airbag Faults" option. Press "ENTER" to view any stored SRS fault codes. These codes can help identify the specific issue with the SRS system.
- Clearing Airbag Light/Faults:
After addressing any underlying issues that caused the SRS fault, or if you wish to attempt to clear the light, navigate to the "Clear Airbag Light/Faults" option using the "SCROLL" button. Press "ENTER" to initiate the clearing process. The airbag warning light on your dashboard should extinguish if the fault has been successfully cleared and no active issues remain.
Note: Clearing the fault codes does not repair the underlying problem. If the fault persists or reappears, further diagnosis and repair by a qualified technician are recommended.
5. Maintenance
To ensure the longevity and reliable performance of your PerGar SRS Reset Scanner, follow these maintenance guidelines:
- Cleaning: Wipe the device with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the casing or internal components.
- Storage: Store the scanner in a cool, dry place, away from direct sunlight, extreme temperatures, and excessive humidity. Keep it in its original packaging or a protective case when not in use to prevent physical damage.
- Cable Care: Handle the diagnostic cables with care. Avoid bending them sharply or pulling them forcefully from the connectors. Inspect cables regularly for any signs of wear or damage.
- Avoid Drops: Protect the device from drops and impacts, which can damage the internal electronics or the screen.
6. Troubleshooting
If you encounter issues while using your PerGar SRS Reset Scanner, refer to the following troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. |
|
|
| "Error" message displayed. |
|
|
| Airbag light remains on after clearing. |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Brand | PerGar |
| Model | B800 |
| Item Weight | 8.1 ounces |
| Package Dimensions | 9.06 x 5.91 x 2.36 inches |
| Power Source | Corded Electric (via vehicle's diagnostic port) |
| Material | High-quality ABS |
| Compatibility | BMW E36, E46, E34, E38, E39, Z3, Z4, X5 series (Saloon, Coupe, Compact, Convertible, Touring) |
8. Warranty Information
PerGar products are manufactured to high-quality standards. Specific warranty details may vary. Please retain your proof of purchase for any warranty claims.
For detailed warranty terms and conditions, please refer to the official PerGar website or contact customer support directly. The warranty typically covers defects in materials and workmanship under normal use.
9. Customer Support
If you have any questions, require technical assistance, or need further support regarding your PerGar SRS Reset Scanner, please contact PerGar customer service through the following channels:
- Manufacturer Website: Visit the official PerGar website for FAQs, product registration, and support contact information.
- Email Support: Refer to your product packaging or the manufacturer's website for the dedicated support email address.
- Online Retailer: For purchase-related inquiries, you may also contact the retailer from whom you purchased the product.
When contacting support, please have your product model (B800) and purchase information readily available.
