1. Introduction
The Ulike Air 10 IPL Hair Removal Device (Model: UI20 DB) is designed for effective and nearly painless hair reduction from the comfort of your home. Utilizing advanced Intense Pulsed Light (IPL) technology, this device offers a convenient solution for long-lasting smooth skin.
Figure 1: Ulike Air 10 IPL Hair Removal Device and included accessories (safety glasses, razor, power adapter).
2. Key Features
- Sapphire Ice-Cooling Technology: Maintains a contact temperature below 65°F (18°C) for a nearly painless and comfortable experience, even during prolonged use. This patented technology ensures skin safety and comfort across all treated areas.
- Dual Lights for Enhanced Coverage: Unlike traditional single-pulse devices, the Air 10 features dual lamps that cover an 18% wider treatment area and emit double flashes, allowing for faster full-body sessions in approximately 10 minutes.
- SHR Mode for Stubborn Hair: The Salon-inspired SHR (Super Hair Removal) Mode delivers a total energy output of 26J per 4-pulse burst, effectively targeting coarse and stubborn hairs, ideal for areas like the chest, armpits, and legs.
- SkinSensor Technology: Equipped with a brand-new skin protection technology that detects skin tones, automatically adjusts power levels, and prevents flashing if the skin tone is deemed too dark for safe application.
- Multiple Treatment Modes: Choose from Fast Mode, Normal Mode, High Mode, and SHR Mode to suit specific body areas and skin sensitivities.
- Visible Results: Experience significant hair reduction (up to 96.52%) and slower hair regrowth in as little as 2 weeks with consistent use.
Figure 2: Sapphire Ice-Cooling Technology ensures comfortable and safe treatments.
Figure 3: Internal cooling and dual light system for efficient operation.
Figure 4: SkinSensor Technology ensures safe and customized treatment based on skin tone.
3. Important Safety Information
READ ALL INSTRUCTIONS BEFORE USE.
- IPL technology is not suitable for all skin tones and hair colors. Refer to the skin tone chart provided in the manual and on the product packaging before use.
- Do not use if pregnant or breastfeeding.
- Not suitable for tattooed, allergic to light, or over-tanned skin.
- Always wear the provided safety glasses during operation to protect your eyes from intense pulsed light.
- Ensure the device is clean and dry before each use.
- Keep out of reach of children.
Figure 5: IPL Skin Tone and Hair Color Compatibility Chart. Not recommended for dark brown skin or red, light blonde, white/gray hair.
4. Setup
- Prepare the Skin: Before treatment, ensure the desired area is clean, dry, and free of any lotions or creams. Shave visible hair from the treatment area using the included razor or your preferred method.
- Connect Power: Plug the device into a power outlet using the provided power adapter. The device is designed for continuous use while plugged in.
- Wear Safety Glasses: Put on the provided safety glasses to protect your eyes from the intense light flashes.
Figure 6: Step 1 - Shave the visible hair from the treatment area.
Figure 7: Step 2 - Plug in the device to start treatment.
5. Operating Instructions
- Power On: Press and hold the power button (located on the side) for a few seconds until the indicator lights illuminate.
- Select Mode: Briefly press the power button to cycle through the different treatment modes: Fast, Normal, High, and SHR. Choose the mode appropriate for your skin area and sensitivity.
- Apply to Skin: Place the device's treatment window firmly and completely against your skin at a 90-degree angle. The SkinSensor technology will detect your skin tone and adjust the intensity automatically.
- Initiate Flash: Press the flash button to emit a pulse of light. For continuous flashing in Fast Mode (Auto-Glide), press and hold the flash button for 2 seconds.
- Glide and Repeat: Slowly glide the device over the treatment area, ensuring full contact with the skin. Treat each area according to the recommended frequency.
Figure 8: Auto-Glide Technology for effortless full-body hair removal.
Treatment Schedule:
- First 1-4 Weeks: Treat three times per week.
- Maintenance Sessions: Treat once or twice per month for long-lasting hair removal results.
Figure 9: Recommended treatment frequency for initial and maintenance phases.
6. Maintenance
- Cleaning: After each use, wipe the treatment window with a soft, dry cloth. Do not use abrasive cleaners or harsh chemicals.
- Storage: Store the device in a cool, dry place, away from direct sunlight and moisture. Keep it in its original packaging or a protective case when not in use.
- Overheating: The device may briefly power off after 15 minutes of continuous use to prevent overheating. Allow it to cool down for a few minutes before resuming use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not flashing |
|
|
| No power |
|
|
| Skin feels warm/uncomfortable |
|
|
8. Specifications
- Model Name: UI20 DB
- Manufacturer: Shenzhen Ulike Smart Electronics Co.,Ltd
- Product Dimensions: 8.2 x 2.2 x 2.8 inches
- Item Weight: 0.9 Pounds (14.4 ounces)
- Power Source: Battery Powered (operates while plugged in)
- Energy Output (SHR Mode): 26J per 4-pulse burst
9. Warranty and Support
Ulike stands behind the quality of its products. The Ulike Air 10 IPL Hair Removal Device comes with:
- 100-Day Money Back Guarantee: Try the device freely for 100 days.
- 2-Year Warranty: Covers manufacturing defects and malfunctions under normal use.
- 5 Years of Sales Service: Dedicated customer support for any inquiries or assistance needed.
For warranty claims or support, please contact Ulike customer service through the official website or your point of purchase.
