Brookstone Desk LED Alarm Clock with 15W Wireless Charger

Introduction

The Brookstone Desk LED Alarm Clock with 15W Wireless Charger is a versatile device designed to simplify your bedside or desk setup. It combines a clear LED digital alarm clock with a powerful 15W wireless charging pad, compatible with a wide range of smartphones and wireless earbuds. This manual provides detailed instructions to help you set up, operate, and maintain your device for optimal performance.

Safety Information

• Do not expose the device to water, moisture, or extreme temperatures.
• Use only the provided or recommended power adapter. A power adapter is not included with this product.
• Avoid placing metal objects or foreign materials on the wireless charging pad, as this may cause damage or interfere with charging.
• Keep the device away from strong magnetic fields.
• Do not attempt to disassemble or repair the device yourself. Refer all servicing to qualified personnel.
• Ensure proper ventilation around the device during operation.

Package Contents

• Brookstone Desk LED Alarm Clock with 15W Wireless Charger Unit
• USB-C to USB-A Charging Cable

Product Overview

Familiarize yourself with the components of your Brookstone Desk LED Alarm Clock.

Image: Overview of the Brookstone Desk LED Alarm Clock, highlighting its buttons and wireless charging area.

• LED Display: Shows time, alarm status, and other indicators.
• Wireless Charging Area: Located on the base, for charging compatible devices.
• M Button: Function Adjustment (Mode button).
• Clock Button: Used for setting time and alarms.
• + Button: Increase brightness, adjust time/alarm values.
• - Button: Decrease brightness, adjust time/alarm values.
• Charging Indicator Light: Located below the charging area, signals charging status.

Setup

1. Power Connection: Connect the provided USB-C cable to the charging port on the back of the alarm clock. Plug the other end of the cable into a compatible USB power adapter (not included). The display will light up, indicating power is connected.
2. Initial Power-On: The clock will typically display a default time or 00:00 upon first power-on.

Operating Instructions

Setting the Time

1. Press the Clock Button once. The hour digits will start flashing.
2. Use the + or - buttons to adjust the hour.
3. Press the Clock Button again. The minute digits will start flashing.
4. Use the + or - buttons to adjust the minutes.
5. Press the Clock Button one more time to confirm and exit time setting mode.

Setting the Alarm

1. Press the M Button to cycle through alarm settings (Alarm 1, Alarm 2). The alarm icon will appear next to the time.
2. When the desired alarm (e.g., Alarm 1) is displayed, press the Clock Button. The hour digits for the alarm will flash.
3. Use the + or - buttons to set the alarm hour.
4. Press the Clock Button again. The minute digits for the alarm will flash.
5. Use the + or - buttons to set the alarm minutes.
6. Press the Clock Button to confirm.
7. To activate or deactivate an alarm, press the M Button until the desired alarm is shown, then press the + button to toggle it on/off. An alarm icon will indicate it is active.
8. Snooze Function: When the alarm sounds, press any button (except the power button if applicable) to activate snooze. The alarm will sound again after a few minutes.
9. Turning Off Alarm: To turn off the alarm completely, press and hold the M Button until the alarm icon disappears.

Adjusting Display Brightness

The LED screen is dimmable, allowing you to adjust its brightness for comfort.

Image: Visual representation of the dimmable LED display, showing brightness levels from 0% to 100%.

• Press the + button to increase the display brightness.
• Press the - button to decrease the display brightness.
• The brightness can be adjusted from 0% to 100%.

Using the Wireless Charging Function

The charging area supports 15W wireless charging for compatible devices.

Image: A smartphone charging wirelessly on the Brookstone alarm clock, illustrating over-current, over-temperature, and over-voltage protection features.

1. Place your Qi-compatible smartphone or AirPods on the wireless charging area on the base of the clock.
2. Ensure the device is centered on the charging pad for optimal charging.
3. The light indicator below the charging area will signal different states:
   • Flashes twice: Power connected.
   • Off: Standby mode.
   • Lights up: Device is charging.
   • Turns off: Device is fully charged.
4. The wireless charger is compatible with 15W fast charging standards.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the device. Do not use abrasive cleaners or solvents.
• Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight.

Troubleshooting

Specifications

• Model: BK15-QC1-BK
• Product Dimensions: 5 x 1.5 x 5 inches
• Item Weight: 9.6 ounces
• Connectivity Technology: Wireless
• Connector Type: USB Type C
• Input Voltage: 5 Volts
• Special Feature: 15W Wireless Charging (Note: Product description states 15W, specifications state 10W. Refer to product packaging for definitive wattage.)
• Compatible Devices: Smartphones, Headphones
• Compatible Phone Models: iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15, iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14, iPhone 13 Pro max, iPhone 13 Pro, iPhone 13, iPhone 12 pro, iPhone 12, iPhone 11, iPhone XR, AirPods Pro, AirPods 2, Android phones with Qi2 or Qi with compatible magnet cases/rings.
• Mounting Type: Tabletop Mount
• Color: Black

Image: Diagram showing the universal compatibility of the wireless charger with various iPhone models (12, 13, 14, 15 with compatible MagSafe cases) and Android phones (with Qi2 or Qi and compatible magnet cases/rings).

Warranty and Support

For warranty information and customer support, please refer to the product packaging or visit the official Brookstone website. You may also contact Brookstone customer service directly for assistance with product inquiries, troubleshooting, or warranty claims.

Brookstone Store: Visit the Brookstone Store on Amazon