Introduction
Thank you for purchasing the Proscan Light Up Bluetooth Speaker. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new speaker. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
Image: The Proscan Light Up Bluetooth Speaker, showcasing its cylindrical design, integrated control panel, and vibrant LED light ring. The speaker features a black body with a prominent blue ring around the control buttons and a translucent top section that illuminates with multiple colors (blue, magenta, green).
Package Contents
Ensure all items are present in the package:
- Proscan Light Up Bluetooth Speaker
- USB-C Charging Cable
- Instruction Manual (this document)
Product Features
- Wireless Bluetooth Connectivity
- 7.5W x 2 Built-in Speakers for Powerful Audio
- IPX4 Water Resistance for Outdoor Durability
- Built-in FM Radio
- Two Passive Radiators for Rich, Full Sound
- Integrated LED Light Ring
- USB-C Port for Battery Recharging
- AUX In Jack
- Built-in Rechargeable Lithium-Ion Battery
Setup
Charging the Speaker
Before first use, fully charge the speaker. Connect the supplied USB-C cable to the speaker's USB-C port and the other end to a USB power adapter (not included) or a computer's USB port. The LED indicator will show charging status. A full charge takes approximately 2 hours.
Powering On/Off
Press and hold the Power button (usually marked with a power symbol) for a few seconds to turn the speaker on or off. A sound prompt will indicate the power status.
Operating Instructions
Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode. The LED light may flash to indicate it's ready to pair.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "Proscan Speaker" or a similar name from the list of devices.
- Once paired, the speaker will emit a confirmation sound, and the LED light may change to a solid color.
- You can now play audio from your device through the speaker.
FM Radio Mode
To switch to FM Radio mode, press the Mode button (if available, or cycle through modes using the power button if it doubles as a mode button). The speaker will automatically scan and save available FM stations. Use the Next/Previous buttons to navigate between stations.
AUX Input Mode
Connect an audio device to the speaker's AUX-in port using a 3.5mm audio cable (not included). The speaker should automatically switch to AUX mode. If not, press the Mode button to select AUX input.
Controlling Playback and Volume
- Play/Pause: Press the Play/Pause button.
- Volume Up: Press the Volume + button.
- Volume Down: Press the Volume - button.
- Next Track: Press and hold or short press the Next Track button (often combined with Volume +).
- Previous Track: Press and hold or short press the Previous Track button (often combined with Volume -).
LED Light Control
The speaker features an integrated LED light ring. Depending on the model, there may be a dedicated button to cycle through light modes or turn the lights on/off. Refer to the specific button layout on your speaker.
Maintenance and Care
- Keep the speaker away from extreme temperatures, direct sunlight, and excessive moisture.
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure ports are free of dust and debris.
- The speaker is IPX4 water resistant, meaning it can withstand splashes. Do not submerge it in water.
- Store the speaker in a cool, dry place when not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Battery is drained. | Charge the speaker using the USB-C cable. |
| Cannot pair via Bluetooth. | Speaker is not in pairing mode or too far from device. | Ensure speaker is in pairing mode. Move speaker closer to device. Forget device on your phone and re-pair. |
| No sound. | Volume is too low or device is not connected properly. | Increase volume on both speaker and connected device. Check Bluetooth connection or AUX cable. |
| FM radio reception is poor. | Weak signal or interference. | Relocate the speaker to an area with better reception. |
Specifications
| Model Name: | PSP1684-BLACK |
| Speaker Type: | Component |
| Connectivity Technology: | Bluetooth, USB |
| Speaker Maximum Output Power: | 7.5 Watts x 2 |
| Water Resistance: | IPX4 |
| Battery Life: | Approximately 2 hours (at 100% volume) |
| Charging Time: | 2 Hours |
| Product Dimensions: | 3.5"D x 3.5"W x 8.5"H |
| Item Weight: | 1.23 pounds |
| Manufacturer: | CURTIS INTERNATIONAL LTD |
Warranty Information
This product comes with a Limited Warranty provided by CURTIS INTERNATIONAL LTD. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included with your purchase or visit the manufacturer's official website. Keep your proof of purchase for warranty service.
Customer Support
For further assistance, technical support, or warranty inquiries, please contact PROSCAN ELITE customer service. Contact information can typically be found on the manufacturer's website or on the product packaging.
Manufacturer: CURTIS INTERNATIONAL LTD
Model: PSP1684-BLACK
ASIN: B0CV187XGC
