1. Introduction
This manual provides comprehensive instructions for the Tribesigns 63-inch Console Table, Model AL24158. Please read this manual carefully before assembly and use to ensure proper installation, safe operation, and optimal product longevity. Keep this manual for future reference.
Image: An angled view of the console table, highlighting its design and finish.
2. Safety Warnings
- Two-Person Assembly: Always assemble this product with at least two people to prevent injury and ensure stability.
- Weight Limit: Be aware of the recommended maximum weight capacity (220 lbs / 100 kg) to prevent stability problems and damage. Do not overload the table.
- Follow Instructions: Adhere strictly to the included mounting guide and use the provided installation tools for safe and secure assembly.
- Stable Surface: Place the console table on a flat, stable, and level surface.
- Children and Pets: Keep small parts and packaging materials away from children and pets during assembly.
3. Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1 x Console Table Top
- 1 x Base
- 2 x Geometric Metal Frame Supports
- Hardware Pack (screws, bolts, washers, Allen wrench)
- Assembly Instruction Manual
Image: Close-up view of the console table's features, highlighting the adjustable foot pads, the thickness of the tabletop, and the unique artistic design of the frame.
Image: Detailed view of the geometric brown metal frame, emphasizing its sturdy construction and unique aesthetic.
4. Assembly Instructions
Assembly is required for this console table. Please follow these steps carefully. It is recommended to have two people for assembly.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches.
- Identify Parts: Refer to the included assembly instruction manual to identify each numbered part and hardware piece.
- Attach Frame to Base: Secure the geometric frame supports to the table base using the provided hardware. Do not fully tighten screws until all components are aligned.
- Attach Tabletop to Frame: Carefully place the tabletop onto the assembled frame and base. Align the pre-drilled holes and secure the tabletop using the remaining hardware.
- Tighten All Screws: Once all parts are correctly aligned, gradually tighten all screws and bolts until secure. Avoid over-tightening.
- Adjust Leveling Feet: If your floor is uneven, adjust the leveling feet on the bottom of the base to ensure the table is stable and does not wobble.
Image: Dimensional diagram of the console table, illustrating its overall size and proportions.
5. Usage Guidelines
- Placement: This console table is designed for indoor use in areas such as hallways, living rooms, or entrances.
- Weight Capacity: The maximum recommended weight for this table is 220 pounds (approximately 100 kg). Distribute weight evenly across the tabletop.
- Surface Protection: Use coasters or placemats under hot items, beverages, or decorative objects to protect the tabletop finish.
- Stability: Regularly check that all screws and bolts are tight to maintain stability.
Image: The console table positioned in a living room, showcasing its use as a display surface for a lamp and other decorative items.
6. Care and Maintenance
- Cleaning: Wipe the table surface with a dry, soft cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, which can damage the finish.
- Spills: Clean spills immediately with a dry cloth to prevent staining or damage to the engineered wood surface.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the finish.
- Heat and Moisture: Keep the table away from direct heat sources and areas of high humidity.
7. Troubleshooting
If you encounter any issues with your console table, please refer to the following common solutions:
- Wobbling Table:
- Ensure the table is on a flat, level surface.
- Adjust the leveling feet on the bottom of the base until the table is stable.
- Check that all assembly screws and bolts are securely tightened.
- Missing Parts: If you find any parts missing during assembly, do not proceed. Contact customer support immediately for assistance.
- Damage During Shipping: If the product arrived damaged, please contact customer support with details and photographic evidence.
8. Product Specifications
| Brand | Tribesigns |
| Model Number | AL24158 |
| Color | Cherry (Brown) |
| Material | Engineered Wood (E0 Grade MDF) |
| Frame Material | Metal |
| Product Dimensions (L x W x H) | 160 cm x 30 cm x 80 cm (63 in x 11.8 in x 31.5 in) |
| Item Weight | 18.01 kg (39.7 lbs) |
| Maximum Weight Recommendation | 100 kg (220 lbs) |
| Special Features | Easy Assembly, Heavy Duty, Scratch Resistant, Adjustable Leg Pads |
| Care Instructions | Wipe with Dry Cloth |
9. Warranty Information
This Tribesigns console table comes with an 18-month product support period from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. Please retain your proof of purchase for warranty claims.
10. Customer Support
For any questions, assistance with assembly, missing parts, or warranty claims, please contact Tribesigns customer support. We offer lifetime professional support and 24-hour assistance.
Contact Information: Please refer to the contact details provided on your purchase receipt or the official Tribesigns website.
