Introduction
This manual provides essential instructions for the safe and efficient use of your Konstsmide Lyon Mint Green RGB Table Lamp, model 7830-630. Please read this manual thoroughly before operating the lamp and retain it for future reference.
Image: The Konstsmide Lyon RGB Table Lamp 7830-630 in mint green, illuminated, showcasing its sleek design.
Safety Instructions
- Do not expose the lamp to extreme temperatures or direct sunlight for prolonged periods.
- Keep the lamp away from water and high humidity to prevent electrical hazards.
- Use only the provided charging accessories or compatible 5V chargers.
- Do not attempt to disassemble or modify the lamp. This will void the warranty.
- Keep out of reach of children.
Package Contents
- 1 x Konstsmide Lyon RGB Table Lamp (Model 7830-630)
- 1 x Charging Cable (USB-C to USB-A, or similar)
- 1 x User Manual
Setup
1. Initial Charging
Before first use, fully charge the lamp. Connect the charging cable to the lamp's charging port and plug the other end into a compatible USB power adapter (not included) or a powered USB port. The charging indicator light (if present) will show charging status.
A full charge typically takes approximately 4-6 hours. The lamp is equipped with 2 Lithium-ion batteries.
Image: A wireless charging base and cable, illustrating how to connect the lamp for charging. The lamp sits on this base.
2. Placement
Place the lamp on a stable, flat surface. Ensure it is not near heat sources or in direct sunlight, which could affect battery life and performance.
Operating Instructions
The Konstsmide Lyon lamp features a touch-sensitive control on the top of the lamp shade for power, brightness, and color adjustments.
1. Power On/Off
- To Turn On: Lightly tap the touch sensor on the top of the lamp. The lamp will illuminate with the last used setting.
- To Turn Off: Tap and hold the touch sensor for approximately 2-3 seconds until the light extinguishes.
2. Adjusting Brightness
While the lamp is on, lightly tap the touch sensor repeatedly to cycle through different brightness levels. The lamp typically has 3-4 brightness settings.
3. Changing Colors (RGB Function)
The lamp features an RGB function, allowing for a variety of color options.
- To Change Color: After turning the lamp on, tap the touch sensor twice quickly. This will switch the lamp into RGB color mode.
- To Select a Specific Color: While in RGB mode, tap the touch sensor to cycle through available colors.
- To Return to White Light: Continue tapping through the RGB colors until the lamp returns to a white light setting, or turn the lamp off and on again.
Image: A grid of nine Konstsmide Lyon lamps, each displaying a different color from its RGB spectrum, including white, red, green, blue, purple, and orange.
Maintenance
1. Cleaning
Wipe the lamp with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the aluminum finish and electronic components.
2. Battery Care
- To prolong battery life, avoid completely draining the battery frequently.
- If storing the lamp for an extended period, charge it to about 50% capacity and recharge every few months.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Charge the lamp fully. |
| Lamp does not charge. | Faulty charging cable or adapter; improper connection. | Ensure the charging cable is securely connected. Try a different USB power adapter or cable. |
| Colors are not changing. | Not in RGB mode; touch sensor issue. | Double-tap the touch sensor to enter RGB mode. Ensure the touch sensor is clean and unobstructed. |
| Light flickers or is dim. | Low battery; internal issue. | Recharge the lamp. If the problem persists after charging, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 7830-630 |
| Brand | Konstsmide |
| Dimensions (L x W x H) | 12 x 12 x 30 cm |
| Weight | 567 grams |
| Material | Aluminum |
| Light Source Type | LED |
| Power | 2 Watts |
| Voltage | 5 Volts |
| Battery Type | 2 Lithium-ion (included) |
| Special Feature | Wireless, RGB Function |
| Style | Modern |
Warranty and Support
This Konstsmide product comes with a minimum 2-year warranty from the date of purchase, covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
For technical support, warranty claims, or spare parts inquiries, please contact Konstsmide customer service. Spare parts availability is guaranteed for 1 year.
Note: Software updates information is not available for this product.
