1. Product Overview
This manual provides essential information for the installation, operation, and maintenance of your Montech X3 Mesh PC Gaming Case and Thermaltake Smart 600W Power Supply. Please read this manual thoroughly before beginning assembly or operation.
Figure 1: Montech X3 Mesh PC Gaming Case and Thermaltake Smart 600W Power Supply bundle.
Montech X3 Mesh PC Gaming Case
The Montech X3 Mesh is an ATX Mid-Tower PC gaming case designed for high airflow and visual appeal. It features a full panoramic tempered glass front and side panels, allowing for a clear view of internal components and RGB lighting. The case comes with six pre-installed fixed RGB lighting fans (3x 140mm front, 3x 120mm top/rear) to optimize airflow and provide aesthetic lighting.
Figure 2: Front view of the Montech X3 Mesh PC Gaming Case, highlighting the mesh and glass panels.
Thermaltake Smart 600W Power Supply
The Thermaltake Smart 600W ATX 12V V2.3/EPS 12V Power Supply is 80 Plus Certified, offering up to 86% efficiency. It provides a continuous 600W output and features an intelligent 120mm cooling fan for quiet operation. The single +12V rail design ensures stable and reliable performance for mainstream PC builds.
Figure 3: Thermaltake Smart 600W Power Supply shown with its packaging.
2. Setup and Installation
Montech X3 Mesh Case Installation
- Accessing the Interior: The tempered glass side panel is hinged and swings open for easy access to the case interior. Gently pull the fabric loop on the side panel to open it.
- Motherboard and Component Installation: Install your motherboard, CPU, GPU, and other components into the case. Ensure all standoffs are correctly aligned.
- Cable Management: Utilize the cable routing cutouts and tie-down points behind the motherboard tray for clean cable management. Note that some cable routing holes near the PSU shroud may be partially obstructed depending on your power supply and cable thickness.
- Fan Connections: The six pre-installed RGB fans are connected to a fan hub/controller. This hub typically requires a SATA power connection from your power supply. It also provides additional RGB connectors for other compatible components, such as AIO coolers.
- Front Panel I/O Connections: Connect the front panel I/O cables (USB 2.0, USB 3.0, HD Audio, power, reset, LED) to your motherboard. Ensure correct pin alignment for proper functionality.
Figure 4: Montech X3 Mesh case with the hinged tempered glass side panel open.
Thermaltake Smart 600W Power Supply Installation
- Mounting: Install the power supply into the designated PSU shroud area at the bottom of the case. Secure it with screws.
- Cable Connections: Connect the necessary power cables from the PSU to your motherboard (24-pin ATX, 8-pin EPS), GPU (PCI-E 6+2pin connectors), storage drives (SATA), and the case's fan hub.
- Power On: Once all components are securely installed and connected, plug the power supply into a wall outlet and flip the power switch on the PSU to the 'On' position.
Figure 5: Side view of the Thermaltake Smart 600W Power Supply, showing its connectors.
3. Operating Instructions
Montech X3 Mesh Case Operation
- Power Button: Located on the top panel of the case, press to power on or off your PC.
- LED Button: Press the dedicated LED button on the top panel to cycle through different fixed RGB lighting modes for the pre-installed fans. You can also turn the fan lighting on or off using this button.
- Front Panel I/O: The top panel includes USB 2.0 and USB 3.0 ports for connecting peripherals, along with audio jacks for headphones and microphones.
Thermaltake Smart 600W Power Supply Operation
- The power supply operates automatically once connected and powered on, providing stable and continuous power to your system components.
- The integrated 120mm fan will adjust its speed based on the power supply's temperature to maintain optimal cooling and low noise levels.
4. Maintenance
Case Maintenance
- Dust Filters: The Montech X3 Mesh case features removable dust filters, including a magnetic filter on the top panel and a spring-loaded filter on the front. Regularly remove and clean these filters to prevent dust buildup and maintain optimal airflow.
- Tempered Glass Panels: Clean the tempered glass panels with a soft, lint-free cloth and a glass cleaner. Avoid abrasive materials that could scratch the glass.
- Interior Cleaning: Periodically use compressed air to remove dust from internal components and fans.
Power Supply Maintenance
- Fan Cleaning: Ensure the 120mm fan on the power supply remains free of dust and obstructions to allow for proper cooling. Use compressed air to gently clear any dust.
- Ventilation: Ensure adequate ventilation around the power supply unit within the case to prevent overheating.
5. Troubleshooting
- Cable Routing Obstruction: Some users have reported that the two cable routing holes closest to the PSU shroud may be difficult to use due to the power supply's position. Utilize the third, larger routing hole if needed.
- Fan Controller Connectivity: If the fan controller is not functioning as expected or connecting to the motherboard is unclear, refer to your motherboard's manual for specific fan header locations and consult Montech's support resources for detailed wiring diagrams.
- 5V Cable Length: The 5V cable for the fan hub may be short for some motherboard configurations. Plan your cable routing carefully to ensure it reaches the appropriate header.
- Front Panel Fragility: The front panel is a single piece of tempered glass and is not designed to be removed. Exercise caution when handling or transporting the case to prevent damage to the front glass.
6. Specifications
Montech X3 Mesh PC Gaming Case
- Brand: Montech
- Series: Montech X3
- Color: Black
- Case Type: Mid Tower
- Material: Tempered Glass
- Cooling Method: Air
- Fan Count: 6 (3x 140mm front, 3x 120mm top/rear)
- Compatible Devices: Personal Computer
- Hard Disk Form Factor: 3.5 Inches
Thermaltake Smart 600W Power Supply
- Brand: Thermaltake
- Model: SP-600AH2NKW (PS-SPD-0600NPCWUS-W)
- Type: Intel ATX 12V 2.3 / EPS 12V 2.92
- Max. Output Capacity: 600W
- Color: Black
- Dimension (H x W x D): 86mm x 150mm x 140mm
- PFC (Power Factor Correction): Active PFC
- Power Good Signal: 100-500 msec
- Hold Up Time: 16msec (minimum) within 60% load
- Input Current: 10A max
- Input Frequency Range: 50 Hz - 60 Hz
- Input Voltage: 100Vac - 240Vac
- Operating Temperature: 5℃ to +40℃
- Operating Humidity: 20% to 85%, non-condensing
- Storage Temperature: -40℃ to +55℃
- Storage Humidity: 10% to 95%, non-condensing
- Cooling System: 120mm Fan: 1800 R.P.M. ± 10%
- Efficiency: 82-86% efficiency @ 20-100% load (80 PLUS Certified)
- MTBF: 100,000 hrs minimum
- Safety Approval: CE/CB/TUV/ UL/ FCC
- PCI-E Connector: PCI-E 6+2pin x 2
- Protections: OPP (Over Power Protection), OVP (Over Voltage Protection), SCP (Short Circuit Protection)
7. Warranty and Support
Thermaltake Smart 600W Power Supply Warranty
- The Thermaltake Smart 600W Power Supply comes with a 5-year warranty. Please retain your proof of purchase for warranty claims.
General Support
For further assistance, technical support, or warranty inquiries regarding your Montech case or Thermaltake power supply, please refer to the official websites of Montech and Thermaltake or contact their respective customer service departments.
