1. Product Overview
The ZEBRONICS Juke BAR 9900 is a high-performance 7.2.2 (5.2.4) channel surround soundbar system designed to deliver an immersive audio experience for your home entertainment. With a total output power of 725 Watts, it features dual wireless subwoofers and satellites, Dolby Atmos, DTS X support, a Karaoke UHF microphone, and multiple connectivity options including HDMI eARC, Optical, AUX, and Bluetooth.
Figure 1.1: ZEBRONICS Juke BAR 9900 Sound System Components
Package Contents:
- Sound Bar - 1 unit
- Wireless Subwoofers - 2 units
- Wireless Satellite Speakers - 2 units
- Wireless UHF Microphone - 1 unit
- Remote Control - 1 unit
- Wall Mount Bracket and Fasteners
- Power Cables
- User Manual
2. Setup Guide
2.1 Unpacking and Placement
Carefully remove all components from the packaging. Place the soundbar centrally below your television. The dual wireless subwoofers and satellite speakers can be positioned for optimal surround sound. Ensure adequate ventilation around all units.
Figure 2.1: Wall-Mountable Soundbar Installation
The soundbar is wall-mountable. Use the included wall-mount bracket and fasteners for secure installation. Refer to the wall-mounting template (if provided separately) for precise drilling locations.
2.2 Connecting Your System
Connect the soundbar to your audio source using one of the available input methods. Ensure all power cables are securely connected to the respective units and then to a power outlet.
Figure 2.2: Soundbar Connectivity Ports
- HDMI eARC: For the best audio quality and Dolby Atmos/DTS X experience, connect your TV's HDMI eARC/ARC port to the soundbar's HDMI eARC port using a high-quality HDMI cable. This allows for uncompressed, high-quality audio transmission and TV remote control integration.
- Optical In: Connect an optical cable from your TV or audio source's optical output to the soundbar's Optical In port.
- AUX Input: Use a 3.5mm audio cable to connect devices with an analog audio output to the soundbar's AUX port.
- USB Port: Insert a USB pen drive (up to 32GB) to play audio files directly from the soundbar.
- Bluetooth v5.3: For wireless audio streaming, pair your Bluetooth-enabled device with the soundbar.
2.3 Powering On/Off
After all connections are made, press the power button on the soundbar or the remote control to turn the system on. The LED display will illuminate, indicating the current mode.
3. Operating Instructions
3.1 Input Selection
Use the 'Input' button on the remote control or the soundbar to cycle through available input modes: BT (Bluetooth), AUX, OPTICAL, HDMI eARC, and USB. The selected mode will be displayed on the LED screen.
3.2 Volume Control
Adjust the volume using the 'VOL+' and 'VOL-' buttons on the remote control or the soundbar. The volume level will be shown on the LED display.
3.3 Audio Modes and Surround Sound
The Juke BAR 9900 supports Dolby Atmos and DTS X for an immersive 7.2.2 (5.2.4) channel surround sound experience. Ensure your audio source and content support these formats for optimal performance.
Figure 3.1: 725W RMS Output with Dolby Atmos and DTS X
Figure 3.2: 7.2.2 (5.2.4) Surround Sound Configuration
To activate or deactivate surround sound, press and hold the 'EQ' button on the remote control for 3 seconds. This feature converts 2.1 audio into a simulated 5.1 experience.
3.4 Karaoke Function
The included wireless UHF microphone allows for karaoke functionality. Simply turn on the microphone, and its audio will be mixed with the main sound output. The microphone functions across all input modes (HDMI, Optical, Bluetooth, AUX).
Figure 3.3: Wireless UHF Microphone and Remote Control
3.5 LED Display and RGB LED Lights
The soundbar features an LED display that shows the current operating mode and settings. The integrated RGB LED lights on the soundbar can be controlled to enhance your listening environment.
4. Maintenance
To ensure the longevity and optimal performance of your sound system, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the surfaces of the soundbar, subwoofers, and satellite speakers. Do not use liquid cleaners or abrasive materials, as they may damage the finish.
- Ventilation: Ensure that the ventilation openings on all units are not blocked. Proper airflow prevents overheating.
- Storage: If storing the system for an extended period, disconnect it from power, clean it, and store it in a cool, dry place away from direct sunlight and extreme temperatures.
5. Troubleshooting
If you encounter issues with your ZEBRONICS Juke BAR 9900, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from the system. | Incorrect input selected, loose cables, muted volume, power issue. | Ensure the correct input mode is selected. Check all cable connections. Increase volume. Verify power supply to all units. |
| Subwoofers/Satellites not connecting wirelessly. | Interference, out of range, pairing issue. | Ensure units are within range. Reduce interference from other wireless devices. Refer to pairing instructions in the full manual (if applicable). |
| Crackling sound during playback. | Source audio quality, cable issue, internal fault. | Test with different audio sources and cables. If the issue persists across all inputs, contact customer support. |
| Auto volume fluctuations or muting via HDMI ARC/eARC. | TV's Consumer Electronics Control (CEC) settings. | Enable CEC (Control Other Devices) on your TV and restart the TV. This often resolves synchronization issues. |
| Remote control not working. | Dead batteries, obstruction, remote not pointed correctly. | Replace batteries. Ensure no obstructions between remote and soundbar. Point remote directly at the soundbar's sensor. |
If the problem persists after attempting these solutions, please contact ZEBRONICS customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Model Name | ZEB-JUKE BAR 9900 |
| Speaker Type | Soundbar System |
| Special Features | Dolby Atmos, DTS X, Karaoke UHF Mic, RGB LED |
| Total Output Power | 725 Watts (RMS) |
| Surround Sound Channel Configuration | 7.2.2 (5.2.4) |
| Connectivity Technology | Bluetooth v5.3, HDMI eARC, Optical In, AUX, USB |
| Subwoofer Connectivity | Wireless |
| Product Dimensions (Soundbar) | 24.2D x 101.1W x 48H Centimeters |
| Item Weight | 13.6 kg |
| Signal-to-Noise Ratio | 78 dB |
| Control Method | Remote Control, Touch Buttons |
| Mounting Type | Wall Mountable |
7. Warranty and Support
7.1 Warranty Information
The ZEBRONICS Juke BAR 9900 comes with a limited warranty. Please refer to the warranty card included in your package for specific terms, conditions, and duration of the warranty period. Keep your purchase receipt as proof of purchase for warranty claims.
7.2 Customer Support
For any technical assistance, service requests, or inquiries regarding your product, please contact ZEBRONICS customer support. You can find contact details on the official ZEBRONICS website or on the product packaging.
Manufacturer/Importer Address: 13/7, Smith Road, Royapettah CHENNAI-600002, India.
Visit the official ZEBRONICS Store on Amazon for more information and product updates.
