1. Introduction
Thank you for choosing the CREWORKS 2L Digital Ultrasonic Cleaner. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.
2. Safety Instructions
Always observe the following safety precautions to prevent injury or damage to the unit:
- Do not disassemble the unit.
- Do not use unattended.
- Always use sufficient fluid in the tank.
- Unplug before filling or draining.
- Do not operate the unit without liquid in the tank.
- Keep out of reach of children.
- Do not immerse the main unit in water or other liquids.
- Use only appropriate cleaning solutions. Avoid flammable or corrosive liquids.
- Ensure the power cord is not damaged and is properly connected to a grounded outlet.
Figure 2.1: The CREWORKS 2L Digital Ultrasonic Cleaner with its warning label, emphasizing safety precautions.
3. Product Overview and Features
The CREWORKS 2L Digital Ultrasonic Cleaner is designed for efficient and thorough cleaning of various items using ultrasonic technology. It features a durable stainless steel tank, digital controls, and multiple cleaning modes.
3.1 Key Features
- 2L Capacity: Suitable for a wide range of items.
- 60W Ultrasonic Power: Provides effective cavitation for deep cleaning.
- 100W Heating Function: Allows for temperature adjustment (20-80℃) to enhance cleaning.
- Digital Controls: Intuitive panel for setting time (0-99 min) and temperature.
- Degassing Mode: Eliminates gas bubbles for improved cavitation efficiency.
- 7 Levels of Oscillation: Adjustable intensity for delicate to robust cleaning.
- Quiet Operation: Thick tank design reduces noise to below 60 dB.
- 3 Cleaning Modes: Quick, Standard, and Deep for varied cleaning needs.
- 304 Stainless Steel Tank: Ensures durability and food-grade safety.
- Transparent Acrylic Lid: Allows real-time observation of the cleaning process.
Figure 3.1: Close-up of the digital control panel, highlighting the time and temperature displays, and control buttons.
Figure 3.2: Illustration of the ultrasonic cleaning principle, showing the formation, expansion, and bursting of microscopic bubbles for effective cleaning.
4. Setup
Follow these steps to set up your ultrasonic cleaner:
- Unpacking: Carefully remove the unit from its packaging. Inspect for any damage.
- Placement: Place the cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation.
- Power Connection: Connect the power cord to the unit and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before plugging in.
- Filling the Tank: Open the lid and fill the stainless steel tank with the appropriate cleaning solution. Ensure the liquid level is between the MIN and MAX marks. Do not overfill or underfill.
- Insert Basket: If using, place the cleaning basket into the tank.
Figure 4.1: The ultrasonic cleaner with its lid open, showing the stainless steel tank and the included cleaning basket.
5. Operating Instructions
Operating your CREWORKS ultrasonic cleaner is straightforward:
5.1 Basic Operation
- Power On: Turn on the main power switch located at the back or side of the unit. The digital display will illuminate.
- Place Items: Carefully place the items to be cleaned into the cleaning basket, ensuring they are fully submerged in the solution but not touching each other or the tank bottom directly.
- Set Temperature (Optional): Press the "T/°C" button to adjust the desired cleaning temperature (20-80℃) using the up/down arrows. Heating will begin automatically.
- Set Time: Use the "TIME" up/down arrows to set the cleaning duration (0-99 minutes).
- Select Mode (Optional): Choose from "QUICK" (5 min), "STD" (15 min), or "EXT" (30 min) preset modes if desired.
- Start Cleaning: Press the "START" button to begin the ultrasonic cleaning cycle. The display will show the remaining time.
- End of Cycle: The unit will automatically stop when the timer reaches zero.
- Remove Items: Carefully remove the cleaning basket and rinse the cleaned items under clean water.
- Power Off: Turn off the main power switch and unplug the unit when not in use.
5.2 Degassing Mode
The Degassing mode removes air bubbles from the cleaning solution, which can interfere with ultrasonic cavitation, making the cleaning process more efficient, especially with new solutions. Press the "DEGAS" button to activate this mode. It is recommended to run degassing for a few minutes before starting a cleaning cycle with fresh solution.
Figure 5.1: Visual representation of the degassing process, where air bubbles are removed from the cleaning solution to optimize ultrasonic performance.
5.3 Adjustable Oscillation
The unit offers 7 levels of oscillation intensity. This allows you to select a gentler cleaning for delicate items or a more powerful one for heavily soiled objects. Adjust the oscillation intensity using the dedicated knob or buttons on the control panel, if available, or by selecting the appropriate cleaning mode.
Figure 5.2: Illustration demonstrating the 7-level oscillation adjustment, allowing users to customize cleaning intensity for various items, from delicate jewelry to robust tools.
6. Maintenance and Care
Proper maintenance ensures the longevity and optimal performance of your ultrasonic cleaner.
- Draining the Tank: After each use, especially if the solution is dirty, unplug the unit and carefully drain the liquid from the tank.
- Cleaning the Tank: Wipe the inside of the tank with a soft cloth. For stubborn residues, use a mild detergent and rinse thoroughly. Do not use abrasive cleaners.
- Exterior Cleaning: Wipe the exterior of the unit with a damp cloth. Do not use harsh chemicals.
- Storage: Store the unit in a cool, dry place when not in use. Ensure the tank is empty and dry.
- Regular Inspection: Periodically check the power cord and plug for any signs of damage.
Figure 6.1: Demonstrates the visible cleaning effect of the ultrasonic cleaner on items like glasses, razor blades, and circuit boards, showing their improved cleanliness after use.
7. Troubleshooting
If you encounter issues with your ultrasonic cleaner, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | No power supply; Power switch off; Damaged power cord. | Check power outlet; Ensure power switch is ON; Inspect power cord for damage. |
| Poor cleaning results. | Insufficient cleaning solution; Incorrect temperature; Items too crowded; Solution needs degassing. | Add more solution; Adjust temperature; Clean fewer items at a time; Activate Degas mode. |
| Unit stops during operation. | Timer expired; Overheating protection activated. | Reset timer; Allow unit to cool down before restarting. |
| Unusual noise during operation. | Items touching tank bottom or each other; Insufficient liquid. | Ensure items are in basket and not touching tank; Add more liquid. |
8. Specifications
Detailed technical specifications for the CREWORKS 2L Digital Ultrasonic Cleaner:
| Feature | Value |
|---|---|
| Model Number | DUC-S002 |
| Tank Volume | 2 Liters |
| Ultrasonic Power | 60W |
| Heating Power | 100W |
| Ultrasonic Frequency | 40 kHz |
| Temperature Range | 20-80℃ (68-176°F) |
| Timer Range | 0-99 minutes |
| Tank Material | 304 Stainless Steel |
| Noise Level | Below 60 dB |
| Product Dimensions (approx.) | 27 x 22.2 x 19.7 cm (10.6 x 8.7 x 7.8 inches) |
| Product Weight (approx.) | 2.8 kg (6.2 lbs) |
Figure 8.1: Dimensional diagram of the ultrasonic cleaner and its cleaning basket, providing precise measurements for planning and usage.
9. Warranty Information
This product comes with a standard manufacturer's warranty. For details regarding warranty coverage, duration, and claims, please refer to the warranty card included with your purchase or contact CREWORKS customer support directly. Keep your proof of purchase for warranty validation.
10. Customer Support
For any questions, technical assistance, or service requests, please contact CREWORKS customer support. Contact information can typically be found on the product packaging, the official CREWORKS website, or through your point of purchase.
Manufacturer: CREWORKS
ASIN: B0CTSVGC2Z
