Introduction
Thank you for purchasing the Coaster Home Furnishings Kendall Upholstered Bed. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new bed. Please read these instructions thoroughly before beginning assembly and retain them for future reference.
Image: The Coaster Kendall Eastern King Upholstered Bed frame, showcasing the black velvet upholstery, channel tufting, and gold accents on the headboard and feet.
Safety Information
- Adult Assembly Required: This product requires assembly by adults. Keep children away from the assembly area.
- Use Proper Tools: Ensure all necessary tools are available and used correctly during assembly.
- Inspect All Parts: Before assembly, verify that all parts are present and undamaged. Do not proceed with assembly if any parts are missing or broken.
- Weight Limit: Do not exceed the maximum weight limit of 600 pounds for this bed.
- Stable Surface: Assemble the bed on a soft, clean, and level surface to prevent scratching or damage.
- Tighten All Fasteners: Periodically check and retighten all bolts and screws to ensure stability.
- Avoid Standing on Bed Frame: Do not stand or jump on the bed frame.
Package Contents
Please ensure all components listed below are present before beginning assembly. If any parts are missing or damaged, contact customer support immediately.
- Headboard
- Footboard
- Side Rails (2)
- Slats (Multiple)
- Support Legs with Levelers
- Hardware Pack (Bolts, Washers, Nuts, Allen Wrench)
Assembly Instructions
Follow these steps carefully to assemble your Coaster Kendall Upholstered Bed. It is recommended to have two adults for assembly.
- Prepare the Area: Clear a spacious area for assembly. Place all components on a soft, non-abrasive surface to prevent damage.
- Attach Side Rails to Headboard: Connect the side rails to the headboard using the provided L-shaped hook and plate mechanism. Secure with bolts and tighten using the Allen wrench.
- Attach Side Rails to Footboard: Connect the other end of the side rails to the footboard, ensuring a secure fit.
- Install Support Legs: Attach the central support legs to the crossbeams or designated points on the bed frame. Adjust the levelers on the support legs to ensure the bed is stable and level on your floor.
- Place Slats: Position the wooden slats across the bed frame, ensuring they are evenly spaced and securely seated in their designated slots or attached with provided fasteners.
- Final Check: Once assembled, gently shake the bed frame to ensure all connections are secure and stable. Retighten any loose fasteners.
Image: Rear view of the Coaster Kendall bed frame, showing the headboard structure, side rail attachment points, and central support leg system.
Operating (Usage)
The Coaster Kendall Upholstered Bed is designed for use with a standard Eastern King size mattress. No box spring is required due to the slat support system. Ensure the mattress is properly centered on the slats for optimal support and comfort.
- Mattress Placement: Carefully place your Eastern King size mattress onto the assembled slat system.
- Weight Distribution: Distribute weight evenly across the bed. Avoid concentrating heavy loads in one small area.
- Regular Inspection: Periodically inspect the bed frame for any signs of wear, loose fasteners, or damage. Address any issues promptly.
Image: The Coaster Kendall Eastern King Upholstered Bed fully assembled with a mattress and bedding, demonstrating its intended use.
Maintenance and Care
Proper care will extend the life and appearance of your upholstered bed.
- Cleaning Code WS: The upholstery fabric has a cleaning code of 'WS'. This means you can use a water-based cleaning agent or a solvent-based cleaning agent. Test any cleaning solution on an inconspicuous area first.
- Regular Dusting: Dust the upholstered surfaces regularly with a soft brush or vacuum with an upholstery attachment to prevent dirt buildup.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Avoid rubbing, which can spread the stain.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading of the fabric.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, bleach, or strong detergents, as these can damage the fabric and finish.
Troubleshooting
If you encounter issues with your bed, refer to the following common solutions:
- Squeaking Noises: Squeaking often indicates loose connections. Re-tighten all bolts and screws on the frame, headboard, and footboard. Ensure slats are properly seated.
- Instability/Wobbling: Check that all support legs are firmly on the floor and adjusted correctly using their levelers. Verify all frame connections are tight.
- Damaged Parts: If any part is damaged during shipping or assembly, do not attempt to force it. Contact customer support for replacement parts.
Specifications
Detailed specifications for the Coaster Kendall Upholstered Bed (Eastern King Size):
| Brand | Coaster Fine Furniture |
| Model Number | 301161KE |
| Size | Eastern King |
| Product Dimensions | 87.5"L x 89"W x 51.5"H |
| Upholstery Fabric Type | Velvet |
| Color | Black |
| Finish Type | Gold (Accents) |
| Weight Limit | 600 Pounds |
| Item Weight | 90.6 Pounds |
| Assembly Required | Yes |
| Product Care Instructions | Cleaning code: WS |
Image: Technical diagram illustrating the dimensions of the Coaster Kendall Eastern King Upholstered Bed, including length, width, and height measurements.
Warranty and Support
This Coaster Home Furnishings product comes with a limited warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or visit the official Coaster Fine Furniture website.
For technical assistance, missing parts, or warranty claims, please contact Coaster Fine Furniture customer support directly. Have your model number (301161KE) and proof of purchase ready when contacting support.
Coaster Fine Furniture Official Website: www.coasterfurniture.com
