EYYA Handheld Car Vacuum Cleaner Instruction Manual

1. Introduction

The EYYA Handheld Car Vacuum Cleaner is a versatile 6-in-1 cordless device designed for efficient cleaning in various environments, including cars, homes, and for pet hair. It features a powerful 120W motor providing up to 16000PA suction, a dual filtration system, and a digital display for monitoring gear and suction levels. Its lightweight and portable design, combined with multiple accessories, makes it suitable for a wide range of cleaning and blowing tasks.

2. Safety Information

• Read all instructions before use to prevent injury and damage.
• Keep the device away from water and do not immerse it in liquids. The main body is non-washable.
• Do not use the vacuum cleaner to pick up flammable or combustible liquids, hot ashes, or sharp objects.
• Ensure the filters are properly installed before operation.
• Use only the recommended 5V/2A adapter for charging. Do not use high-power adapters to avoid damaging the motor.
• Keep hair, loose clothing, fingers, and all body parts away from openings and moving parts.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. Package Contents

Verify that all items are present in the package:

• EYYA Handheld Car Vacuum Cleaner
• Suction & Blow Nozzles Accessory Kit (includes various nozzles)
• Inflatable & Bleed Nozzle (2 sizes)
• Type-C Charging Cable
• User Manual

Image: What's in the Box? This image displays the EYYA Handheld Car Vacuum Cleaner along with its included accessories, such as various nozzles, a charging cable, and the user manual, arranged on a display.

4. Product Overview

Familiarize yourself with the components of your EYYA Handheld Car Vacuum Cleaner:

Image: Exploded view of the vacuum cleaner. This diagram highlights key components such as the latch button, U-lock, clear dust cup, steel filter, HEPA filter, powerful motor, ergonomic design handle, display screen, and points for suction and blowing nozzle installation.

• Display Screen: Shows current gear and suction power level.
• Power Button: Controls power on/off and switches between gears.
• Suction Nozzle Installation: Point for attaching various suction accessories.
• Blowing Nozzle Installation: Point for attaching various blowing accessories.
• Clear Dust Cup: Transparent container for collected debris.
• Steel Filter: Filters larger particles.
• HEPA Filter: Filters fine dust and tiny particles.
• Latch Button & U-Lock: Secures the dust cup and prevents accidental opening.
• Ergonomic Design Handle: For comfortable grip.

5. Setup

5.1 Charging the Device

Before first use, fully charge the vacuum cleaner. The digital display will indicate charging status.

• Connect the Type-C charging cable to the charging port on the vacuum cleaner.
• Connect the other end of the cable to a 5V/2A adapter (not included), car charger, power bank, or computer USB port.
• The digital display will show charging progress. A full charge takes approximately 2.5 hours.
• Important: Do not use high-power adapters (e.g., fast charging phone adapters) as this can damage the motor.

Image: Fast & Safe Charging. This image illustrates the correct charging methods for the vacuum cleaner using a 5V-2A adapter, car charger, power bank, or computer, and explicitly warns against using high-power fast charging adapters.

5.2 Attaching Accessories

Select the appropriate accessory for your cleaning task and attach it firmly to either the suction or blowing port.

Image: Suction Accessories. This image shows the vacuum cleaner being used with a wide mouth suction nozzle for large debris, a standard suction nozzle for flat surfaces and narrow gaps, and a brush suction nozzle for irregular surfaces.

Image: Multi-Purpose Accessories. This image demonstrates the use of the pet care brush, blow nozzle for electronics, and hair dryer nozzle for drying hair or clothes.

Image: Air Inflatable & Bleed Nozzle. This image shows the nozzle being used for both vacuum compression of storage bags and for inflating/deflating items such as swimming rings or yoga balls. Note: This accessory is not for vacuuming.

6. Operation

6.1 Power On/Off and Gear Selection

• Press the power button once to turn on the vacuum cleaner in Gear 1 (12000PA suction). The digital display will show "Gear-1".
• Press the power button a second time to switch to Gear 2 (16000PA suction). The digital display will show "Gear-2".
• Press the power button a third time to turn off the device.

Image: Adjustable 2-Gears Strong Suction. This image illustrates the two suction modes: Gear-1 (12000PA, ~25 mins runtime) and Gear-2 (16000PA, ~30 mins runtime), showing the vacuum cleaning a pet bed and a car interior.

6.2 Using the Blowing Function

To use the blowing function, attach the desired blowing nozzle to the exhaust port of the vacuum cleaner.

• The blowing function operates at the selected gear level (Gear 1 or Gear 2).
• Use the blow nozzle for cleaning dust from keyboards, car vents, or other hard-to-reach areas.
• The hair dryer nozzle provides powerful wind for drying damp clothes or hair.

6.3 LED Light

The integrated LED light illuminates dark corners, assisting in cleaning areas with limited visibility.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.

7.1 Emptying the Dust Cup

• Ensure the vacuum cleaner is turned off.
• Press the U-lock button to release the dust cup.
• Rotate and detach the dust cup from the main body.
• Empty the collected debris into a waste bin. The unique one-click dusting design makes this process easy.

7.2 Cleaning the Filters

The dual filtration system includes a steel filter and a HEPA filter, both of which are reusable and washable.

• After emptying the dust cup, separate the steel filter and HEPA filter by rotating the snap.
• Wash both filters and the dust cup with water. Use a brush if necessary to remove stubborn dirt.
• Allow all components to air dry completely before reassembling. Do not use the vacuum cleaner with wet filters.
• Note: The main machine body is non-washable.

Image: How to Clean and Maintenance. This step-by-step guide shows how to detach the dust cup, empty debris, separate the steel and HEPA filters, wash them, and air dry them before reassembly. It also notes that the machine body is non-washable.

8. Troubleshooting

If you encounter issues with your EYYA Handheld Car Vacuum Cleaner, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official EYYA website. Keep your purchase receipt as proof of purchase.