Outsunny 5-Piece Patio Dining Set (Model 84G-348V00YL) Instruction Manual

1. Introduction

Thank you for choosing the Outsunny 5-Piece Patio Dining Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor furniture. Please read these instructions carefully before assembly and retain them for future reference.

This set includes one square dining table and four matching chairs, designed for outdoor use. The table features a convenient umbrella hole, and all pieces are constructed with durable HDPE and aluminum frames for weather resistance.

2. Safety Information

• Read all instructions before assembly and use.
• Keep children and pets away during assembly. Small parts can be a choking hazard.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not stand or jump on the chairs or table.
• Place the furniture on a flat, stable surface to prevent tipping.
• Do not exceed the weight capacity: 286 lbs (Chair), 110 lbs (Table).
• Avoid placing hot items directly on the table surface without protection.
• When using an umbrella, ensure it is properly secured in the table hole and a heavy base is used to prevent it from tipping over in windy conditions.

3. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer service.

• 1 x Dining Table
• 4 x Dining Chairs
• Hardware Pack (screws, bolts, washers, Allen wrench)
• Instruction Manual

4. Assembly Instructions

Assembly is required for this patio dining set. It is recommended to assemble the furniture on a soft, clean surface to prevent scratches. Two people may be required for certain steps.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out. Check against the package contents list.
2. Assemble Chairs: Attach the chair backs and seats to the chair frames using the provided hardware. Do not fully tighten screws until all parts are aligned.
3. Assemble Table: Attach the table legs to the tabletop using the provided hardware. Ensure the umbrella hole is correctly oriented if applicable.
4. Final Tightening: Once all components are loosely assembled, gradually tighten all screws and bolts evenly until secure. Do not overtighten.
5. Insert Umbrella Hole Cap: If not using an umbrella, insert the provided cap into the table's umbrella hole.

Image 1: The fully assembled Outsunny 5-Piece Patio Dining Set, showcasing the table and four chairs in an outdoor setting.

Image 2: Detailed diagram illustrating the dimensions of the table and chairs, including the 1.6-inch umbrella hole.

5. Operating Instructions

This patio dining set is designed for comfortable outdoor dining and relaxation. The table's integrated umbrella hole allows for the addition of a patio umbrella (not included) to provide shade.

• Placement: Position the dining set on a level, stable outdoor surface such as a patio, deck, or garden area.
• Umbrella Use: To use a patio umbrella, remove the cap from the center hole of the table. Insert the umbrella pole through the hole and secure it with an appropriate umbrella base (sold separately). Ensure the umbrella is closed during strong winds or when not in use.
• Seating: The chairs are designed for individual seating. Avoid overloading or using them for purposes other than seating.

Image 3: A close-up view of the table's umbrella hole, showing the removable cap. This feature allows for the insertion of a patio umbrella.

6. Maintenance

Proper care will extend the life and appearance of your Outsunny patio dining set.

• Cleaning: Wipe clean with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners that could damage the HDPE or aluminum finish.
• Protection: While the set is made from waterproof HDPE and rust-resistant aluminum, covering the furniture during prolonged periods of non-use or extreme weather conditions (heavy rain, snow, intense sun) is recommended to maintain its condition.
• Inspection: Periodically inspect all connections and hardware. Re-tighten any loose bolts or screws to ensure stability and safety.

Image 4: This image highlights the materials used in the patio set: durable HDPE for the surfaces and a sturdy aluminum frame, emphasizing their weather-resistant properties.

7. Troubleshooting

If you encounter any issues with your patio dining set, consider the following common solutions:

• Wobbling Table/Chairs: Check that all bolts and screws are securely tightened. Ensure the furniture is placed on a level surface.
• Difficulty Assembling: Review the assembly instructions carefully. Ensure you are using the correct hardware for each step. Do not force parts together.
• Scratches/Minor Damage: For minor scratches on the aluminum frame, touch-up paint can be used. For HDPE surfaces, minor scuffs may be buffed out with fine-grit sandpaper, though this may alter the texture.

8. Specifications

9. Warranty and Support

For warranty information, missing parts, or technical support, please contact Outsunny customer service. Refer to your purchase documentation for specific contact details or visit the official Outsunny website.

Please have your model number (84G-348V00YL) and proof of purchase ready when contacting support.