KitchenAid Go Cordless Hand Blender KHBRV71 Instruction Manual

1. Introduction

Thank you for choosing the KitchenAid Go Cordless Hand Blender, model KHBRV71. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new appliance. Please read all instructions carefully before first use and retain for future reference.

The KitchenAid Go Cordless Hand Blender offers the freedom to blend anywhere in your kitchen without the constraints of a power cord, powered by a rechargeable 12V MAX battery.

2. Important Safeguards

When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions.
• To protect against electrical shock, do not immerse the motor body, battery, or charger in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact KitchenAid for examination, repair, or electrical or mechanical adjustment.
• The use of attachments not recommended or sold by KitchenAid may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter.
• Do not let cord contact hot surfaces, including a stove.
• When blending liquids, especially hot liquids, use a tall container or make small quantities at a time to reduce splashing.
• Keep hands and utensils out of the container while blending to prevent the possibility of severe injury to persons or damage to the unit. A scraper may be used but must be used only when the appliance is not running.
• Blades are sharp. Handle carefully.
• Do not use the appliance for other than intended use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. Parts and Features

The KitchenAid Go Cordless Hand Blender comes with several components designed for versatile blending tasks.

This image displays the complete KitchenAid Go Cordless Hand Blender package, including the main blender unit, the removable 12V MAX battery, USB-C charging cable, wall adapter, a 3-cup BPA-free jar with lid, and the removable pan guard.

An annotated view of the hand blender, pointing out key components such as the removable battery, variable speed control, the 7-inch blending arm, and the durable stainless steel blade.

Included Components:

• Variable Speed Cordless Hand Blender (Motor Body)
• 12V MAX Removable Battery
• USB-C Charging Cable
• Wall Adapter
• 3 Cup BPA-Free Jar with Lid
• Removable 7-inch Blending Arm with Stainless Steel Blade
• U.S. Patented Removable Pan Guard

4. Setup

4.1. Initial Battery Charging

1. Ensure the 12V MAX removable battery is securely attached to the motor body or charge it separately.
2. Connect the USB-C charging cable to the battery port.
3. Plug the wall adapter into a standard electrical outlet.
4. Allow the battery to fully charge before first use. The indicator lights on the battery will show charging status. A full charge provides approximately 30 minutes of continuous runtime, though actual time may vary based on usage.

The hand blender body and its removable battery are shown separately on a kitchen counter, illustrating the modular design for charging and storage.

4.2. Assembling the Blending Arm

1. Align the blending arm with the motor body.
2. Twist the blending arm clockwise until it locks securely into place. Ensure it is firmly attached before operation.

5. Operating Instructions

5.1. General Operation

1. Ensure the blending arm is securely attached to the motor body and the battery is charged.
2. Immerse the blending arm into the ingredients. Ensure the blade guard is fully submerged to prevent splashing.
3. To activate the blender, press and hold the power button (on/off symbol) and then press the trigger switch. This two-step activation is a safety feature.
4. Adjust blending speed by varying the pressure on the trigger switch. More pressure increases the speed.
5. Move the blender up and down through the ingredients to ensure even blending.
6. Release the trigger switch to stop the blender.

The hand blender in action, efficiently blending ingredients in a pot on a stovetop, demonstrating its use for soups, sauces, and other recipes.

5.2. Using the Pan Guard

The removable pan guard helps protect your cookware from scratches during blending.

1. To attach, snap the pan guard onto the blending arm's blade guard.
2. Ensure it is securely in place before blending in non-stick or delicate pots and pans.
3. To remove, gently pull the pan guard off the blending arm.

6. Care and Cleaning

Proper cleaning ensures the longevity and hygiene of your KitchenAid Go Cordless Hand Blender.

6.1. Disassembly for Cleaning

1. Ensure the blender is turned off and the battery is removed or disconnected from the charger.
2. Twist the blending arm counter-clockwise to detach it from the motor body.
3. Remove the pan guard if attached.

6.2. Cleaning Instructions

• Motor Body and Battery: Wipe clean with a damp cloth. Do not immerse in water or other liquids.
• Blending Arm and Pan Guard: These parts are dishwasher-safe (top rack recommended) or can be hand-washed with warm, soapy water. Rinse thoroughly and dry. Handle the blade carefully as it is sharp.
• 3-Cup BPA-Free Jar with Lid: This jar and lid are dishwasher-safe (top rack recommended) or can be hand-washed.

7. Troubleshooting

If you encounter issues with your hand blender, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

The KitchenAid Go Cordless Hand Blender, model KHBRV71, comes with a 1 Year Limited Warranty. For detailed warranty information, product registration, or to contact customer support, please refer to the official KitchenAid website or the warranty card included with your product.

For assistance with troubleshooting or replacement parts, please visit www.kitchenaid.com or contact KitchenAid customer service directly.