Flieks Twin Size Platform Bed Instruction Manual

Introduction

Thank you for purchasing the Flieks Twin Size Platform Bed. This bed frame is designed for comfort and functionality, featuring a sturdy construction, an LED-lit headboard with storage shelves, a pull-out twin size trundle, and three integrated storage drawers. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and proper use of your new bed.

Safety Information

• Read all instructions carefully before assembly and use.
• Keep all hardware parts out of reach of children.
• Assemble the bed on a soft, clean surface to prevent scratches.
• Ensure all connections are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not exceed the recommended weight capacity for the upper bed (300 lbs) and trundle bed (250 lbs).
• Use only the recommended mattress thickness: 6-8 inches for the upper bed and 6 inches for the trundle.
• Do not allow children to play on or under the bed without supervision.
• Ensure the LED headboard power cord is routed safely to prevent tripping hazards.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Bed Frame Components (Headboard, Footboard, Side Rails)
• Trundle Bed Frame and Slats
• 3 Storage Drawers with Wheels
• Upper Bed Slats (8 pieces)
• LED Light Strip and Power Adapter for Headboard
• Hardware Pack (screws, bolts, nuts, Allen wrench)
• Instruction Manual

Setup and Assembly

Assembly is required for this product. It is recommended to have two people for assembly. Please follow the steps below carefully.

1. Unpack and Identify Parts: Carefully unpack all components and hardware. Lay them out on a clean, soft surface. Refer to the parts list to ensure everything is present.
2. Assemble the Main Bed Frame: Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are snug but do not overtighten until the frame is fully aligned.
3. Install Upper Bed Slats: Place the 8 bed slats across the main bed frame. Secure them in place according to the pre-drilled holes. These slats provide support for the mattress and eliminate the need for a box spring.
4. Assemble the Trundle Bed: Construct the trundle frame. Attach the trundle slats to the trundle frame. The trundle is designed to slide smoothly under the main bed.
5. Assemble Storage Drawers: Assemble the three storage drawers. Attach the wheels to the bottom of each drawer for easy movement.
6. Install LED Headboard: The headboard features built-in shelves and an LED light strip. Ensure the LED strip is properly secured. Connect the power adapter and route the cable safely.
7. Final Tightening: Once all components are assembled and aligned, go back and securely tighten all bolts and screws.

Image: Fully assembled Flieks Twin Platform Bed, showcasing the LED headboard, trundle, and storage drawers.

Image: Close-up view of the bed's headboard, showing the integrated LED lighting and the wooden slats for mattress support.

Image: Detailed view of the pull-out trundle bed and the three storage drawers located beneath the main bed frame.

Image: Technical diagram illustrating the overall dimensions and key measurements of the Flieks Twin Platform Bed.

Operating Instructions

• LED Headboard: The LED light strip on the headboard can be turned on/off and adjusted using the integrated switch or remote control (if included). Ensure the power adapter is plugged into a functional outlet.
• Trundle Bed: To use the trundle bed, gently pull it out from under the main bed. It is equipped with wheels for smooth movement. To store, push it back under the main bed until fully recessed.
• Storage Drawers: The three drawers are on wheels and can be pulled out for access to stored items. Push them back in when not in use to keep the room tidy.

Maintenance

• Cleaning: Wipe the bed frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability and safety.
• LED Care: If the LED light strip requires cleaning, gently wipe it with a dry, soft cloth. Do not use liquids directly on the electrical components.
• Drawer and Trundle Wheels: Keep the wheels free of dust and debris to ensure smooth operation.

Troubleshooting

• Bed feels wobbly: Ensure all bolts and screws are fully tightened. Check that the bed is on a level surface.
• Trundle or drawers are difficult to pull out/push in: Check for obstructions under the bed or in the drawer tracks. Clean any debris from the wheels.
• LED light not working: Verify the power adapter is securely plugged into both the headboard and a working wall outlet. Check for any visible damage to the cable or light strip.
• Missing parts: If any parts are missing upon unboxing, please contact customer support with your purchase details.

Specifications

Warranty and Support

This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, missing parts, or warranty claims, please contact the retailer or manufacturer directly with your model number and purchase date.

Manufacturer: Flieks