1. Safety Information
Please read and understand all instructions before assembly and use. Failure to follow these instructions may result in injury or product damage.
- Weight Limit: Do not exceed the maximum weight capacity of 300 pounds (136 kg) per stool.
- Assembly: Ensure all parts are securely fastened before use. Periodically check and re-tighten all connections.
- Stability: Do not stand on the stool. Use on a flat, stable surface.
- Children: Keep small parts away from children during assembly. Adult supervision is recommended when children are near the product.
- Movement: Do not drag the stools across the floor, as this may damage the legs or floor. Lift and place them.
2. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
Image: Package contents and size information. This diagram illustrates the individual components included in the box, such as the chair back frame, seat frame, wooden frames, and screw bag, alongside the overall dimensions of the assembled stool.
- Chair Back Frame (A) x 1
- Seat Frame (B) x 1
- Wooden Frame (C, D, E, F, G) x 5
- Screw Bag (H, I, J, K, L) x 1 (containing various screws, washers, and an Allen wrench)
3. Assembly Instructions
Assembly is required. Please follow these steps carefully. It is recommended to assemble on a soft, clean surface to prevent scratches.
Step 1 & 2: Attaching Seat Frame and Front Legs
Image: Assembly Steps 1 and 2. Step 1 shows attaching the seat frame to the chair back frame using four bolts, flat washers, and spring washers. Step 2 illustrates inserting the front legs into the seat frame and attaching the front rung and side rungs using wood screws.
- Step 1: Attach the Seat Frame (B) to the Chair Back Frame (A) using FOUR bolts (H), THREE flat washers (I), and THREE spring washers (J). Tighten with the Allen Wrench (K).
- Step 2: Insert the Front Legs (C & D) into the Seat Frame (B). Using the Allen Wrench (K), tighten the bolts (H) with flat washers (I) and spring washers (J). Then, attach the Front Rung (G) to the Front Legs & Side Rungs (E & F) using FOUR Wood Screws (L) and Cross Wrench (K).
Tip: Do not fully tighten all bolts to 100% at first. Tighten to about 50% to allow for adjustment and ensure the whole chair is balanced, then fully tighten.
Step 3 & 4: Attaching Side Rungs and Adjusting Levelers
Image: Assembly Steps 3 and 4. Step 3 shows inserting the side rungs into the chair back frame using two wood screws. Step 4 demonstrates how to install and adjust the levelers on the bottom of the front legs to ensure stability.
- Step 3: Insert Side Rungs (E & F) into the Chair Back Frame (A) using TWO Wood Screws (L). Tighten with the Cross Wrench (K).
- Step 4: Install the adjustable levelers onto the bottom of the front legs. Adjust them by turning clockwise to raise or counter-clockwise to lower, ensuring the stool is stable and level on uneven surfaces.
4. Product Features
The COLAMY D1435-001 bar stools are designed with comfort and durability in mind.
Image: Product Features Overview. This image highlights the ergonomic backrest, comfortable breathable fabric, high-density comfort sponge in the seat, and the sturdy rubber wood frame construction.
- Ergonomic Backrest: Designed to provide optimal support and comfort during extended sitting periods.
- Comfortable Upholstery: The seat is upholstered with a breathable fabric and filled with high-density sponge for a soft and supportive sitting experience.
- Sturdy Construction: Built with a durable rubberwood frame, ensuring stability and longevity.
Image: Additional Product Details. This image showcases the 300 lbs weight capacity, the comfortable footrest for leg support, and the anti-slip protectors on the stool legs to prevent floor damage.
- Weight Capacity: Each stool supports up to 300 pounds (136 kg).
- Comfortable Footrest: Integrated footrests provide additional comfort and support for your legs.
- Anti-Slip Protectors: Equipped with protectors on the bottom of the legs to prevent scratching floors and ensure stability.
5. Dimensions
Refer to the diagram and specifications for detailed product measurements.
Image: Product Dimension Diagram. This diagram provides front and side views of the bar stool with measurements, including overall height (40.55 inches), seat height (25.79 inches), seat width (18.11 inches), and depth (19.69 inches).
- Overall Dimensions (D x W x H): 19.69" x 18.11" x 40.55" (50 cm x 46 cm x 103 cm)
- Seat Height: Approximately 25.79" (65.5 cm)
- Recommended Counter Height: Suitable for counters between 34" - 40" (86 cm - 102 cm)
- Item Weight: Approximately 16.12 pounds (7.31 kg) per stool
6. Care and Maintenance
Proper care will help maintain the appearance and longevity of your bar stools.
- Cleaning: Wipe the wooden frame with a dry, soft cloth. For upholstered fabric, spot clean with a mild detergent and damp cloth as needed. Avoid harsh chemicals.
- Spills: Blot spills immediately with a clean, dry cloth.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric and wood finish.
- Inspection: Periodically check all bolts and connections and re-tighten if necessary to ensure stability.
7. Troubleshooting
If you encounter any issues, refer to these common solutions.
- Stool Wobbles:
- Ensure all bolts are securely tightened.
- Adjust the levelers on the bottom of the front legs to compensate for uneven floors.
- Difficulty Assembling:
- Review the assembly instructions carefully, paying attention to part orientation.
- Do not fully tighten all bolts until the entire structure is assembled, then tighten gradually.
- Scratches on Floor:
- Ensure the anti-slip protectors are properly installed on all legs.
- Avoid dragging the stools; lift them when moving.
8. Warranty and Support
For warranty information, replacement parts, or further assistance, please contact COLAMY customer support through the retailer where the product was purchased or visit the official COLAMY website.
Please have your model number (D1435-001) and purchase date available when contacting support.
