LAUSAINT Home 3 Pieces Rocking Bistro Set

1. Introduction

Thank you for choosing the LAUSAINT Home 3 Pieces Rocking Bistro Set. This set is designed to provide a comfortable and stylish seating solution for your outdoor living space, featuring two rocking chairs and a convenient coffee table. This manual provides essential information for the proper assembly, operation, maintenance, and troubleshooting of your new bistro set to ensure its longevity and your satisfaction.

Please read this manual thoroughly before assembly and use, and retain it for future reference.

2. Safety Information

• Always ensure all components are securely fastened before use.
• Do not exceed the maximum weight limit of 300 lbs per rocking chair.
• Keep children and pets away from the assembly area.
• Store the set in a dry, sheltered place when not in use, especially during harsh weather conditions.
• Avoid placing hot items directly on the table surface without protection.

3. Component List

Please verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

Swivel Rocking Chair Components (x2)

Coffee Table Components (x1)

4. Setup (Assembly)

Assembly typically takes 30-45 minutes for two adults. Do not fully tighten all screws until assembly is completed.

4.1. Swivel Rocking Chair Assembly

1. Attach the Backrest Frame (B) to the Seat Frame (A) using M6 x 35mm Screws (H).
2. Connect the Side Frames (C and D) to the assembled seat and backrest using M6 x 35mm Screws (H).
3. Secure the Swivel Mechanism (E & M) to the underside of the chair frame using M8 x 20mm Screws (J). Ensure the screw cap (M*1) is removed before attaching.
4. Attach the Chair Base (F) to the Swivel Mechanism. Place the Base Cap (U) onto the center of the chair base.
5. Once all parts are loosely assembled, fully tighten all screws using the provided Allen Key (S) and Wrench (R).
6. Place the Seat Cushion (P) and Back Cushion (Q) onto the chair. Secure the back cushion using the integrated straps.

4.2. Coffee Table Assembly

1. Attach the four Table Legs (L and M) to the Tabletop Frame (K) using M6 x 20mm Screws (G).
2. Attach the Bottom Shelf (N) to the lower section of the table legs using M6 x 20mm Screws (G).
3. Once all parts are loosely assembled, fully tighten all screws using the provided Allen Key (S).

Assembly Video Reference:

5. Operating Instructions

The LAUSAINT Home Bistro Set is designed for comfortable outdoor relaxation.

5.1. Swivel and Rocking Functionality

• The chairs feature a 360-degree swivel base, allowing for easy rotation and conversation.
• The rocking mechanism provides a gentle back-and-forth motion for enhanced relaxation.

Image: Demonstrates the smooth 360-degree swivel and gentle rocking motion of the chairs.

5.2. Cushion Usage

• The thickened seat and back cushions provide optimal comfort.
• Cushions are secured to the chair frame to prevent slipping.
• For extended durability, it is recommended to store cushions indoors during prolonged periods of non-use or inclement weather.

6. Maintenance

Proper care will extend the life and appearance of your bistro set.

• Cleaning: Clean the frames and wicker with mild soap and warm water. Use a soft cloth and rinse thoroughly. Avoid abrasive materials, bleach, or harsh solvents, as these can damage the finish.
• Cushion Care: The polyester fabric is water-repellent. For spills, blot immediately with a clean cloth. For deeper cleaning, remove cushion covers if possible and follow care instructions on the label.
• Storage: Store the set in a dry, sheltered place when not in use, especially during off-season or prolonged periods of rain, snow, or extreme temperatures. This will protect the galvanized steel and PE rattan from unnecessary wear.
• Weather Resistance: The PE rattan is UV-resistant and water-resistant for long-term outdoor use. The galvanized steel pipes are rust-resistant and fade-resistant.

Image: Highlights the PE rattan's UV and water resistance, and the galvanized steel's rust and fade resistance.

7. Troubleshooting

If you encounter any issues with your bistro set, please refer to the following common solutions:

• Wobbly Chair/Table: Ensure all screws are fully tightened. Check if the adjustable foot pads on the table are properly leveled on uneven ground.
• Stiff Swivel/Rocking: Ensure the swivel mechanism is clean and free of debris. A small amount of silicone-based lubricant can be applied to moving parts if necessary (avoid oil-based lubricants).
• Cushion Slippage: Verify that the cushion straps are securely fastened to the chair frame.

For persistent issues or concerns not addressed here, please contact LAUSAINT HOME customer support.

8. Specifications

Image: Detailed product dimensions for both the rocking chair and the coffee table.

9. Warranty and Support

For warranty information, please refer to the documentation included with your product packaging or contact the retailer where the product was purchased. LAUSAINT HOME is committed to providing quality products and customer satisfaction.

For any inquiries, missing parts, or support needs, please contact LAUSAINT HOME customer service. Contact details can typically be found on the product packaging or the brand's official website.

We hope you enjoy your LAUSAINT Home 3 Pieces Rocking Bistro Set!