Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your ANZZI AMZ3260RWH Right Drain Quick Fill Walk-In Whirlpool Tub. Please read all instructions carefully before installation and use to ensure proper function and longevity of the product. Retain this manual for future reference.
Safety Information
WARNING: Failure to follow these safety instructions could result in injury or property damage.
- Ensure all electrical connections are performed by a qualified electrician and comply with local codes.
- Verify plumbing connections are secure and leak-free before concealing.
- Do not operate the whirlpool system if the water level is not above the jets.
- Avoid using abrasive cleaners or tools that could damage the tub surface.
- Children and individuals with limited physical, sensory, or mental capabilities should be supervised when using the tub.
- Consult a physician before use if you have health concerns, especially regarding hot water or hydrotherapy.
- Do not use electrical appliances near the tub.
Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact ANZZI customer service.
- Walk-In Whirlpool Tub (AMZ3260RWH)
- 4-Piece Faucet Set (includes spout, hot/cold handles, pull-out sprayer)
- Drain Assembly
- Adjustable Leveling Feet
- User Manual (this document)
- Installation Hardware (screws, gaskets, etc.)
Specifications
| Feature | Detail |
|---|---|
| Model Number | AMZ3260RWH |
| Overall Dimensions (L x W x H) | 59.63 in. x 32 in. x 40 in. |
| Interior Width | 25 in. |
| Drain Location | Right |
| Installation Type | Freestanding |
| Material | Acrylic |
| Color | White |
| Item Weight | 180 Pounds |
| Faucet Flow Rate | 5.7 GPM |
| UPC | 191042078529 |
IMPORTANT: Test the tub's drain and jets thoroughly before permanent installation. Ensure the tub is level and all connections are watertight.
Image Description: A technical diagram showing the top-down and side-profile dimensions of the ANZZI 3260 Walk-In Bathtub. Key measurements include an overall size of 59.625" L x 32" W x 40" H, an interior width of 25", and a seat height of 17.125". The diagram also indicates the step-in height and drain location.
Setup and Installation
Professional installation is recommended for this product. Ensure all local plumbing and electrical codes are met.
- Site Preparation: Ensure the installation area is level, structurally sound, and has adequate access for plumbing and electrical connections.
- Positioning the Tub: Carefully move the tub into its desired location. Adjust the leveling feet to ensure the tub is perfectly level on all sides.
- Drain Connection: Connect the tub's drain assembly to the household drainage system. Use appropriate sealants and ensure all connections are watertight.
- Water Supply Connection: Connect the hot and cold water lines to the faucet assembly. Ensure proper sealing to prevent leaks.
- Electrical Connection: For the whirlpool system, a dedicated GFCI-protected electrical circuit is required. All electrical work must be performed by a licensed electrician according to local codes.
- Faucet Installation: Install the 4-piece faucet set onto the tub deck. Connect the hot and cold water lines and the pull-out sprayer hose.
- Leak Test: Before final placement or concealing, fill the tub with water above the jet level and operate the whirlpool system for several minutes. Inspect all plumbing connections for leaks. Drain the tub and check the drain assembly for leaks.
- Final Placement: Once all tests are successful and no leaks are detected, secure the tub in its final position.
Image Description: An overhead angled view of the ANZZI Walk-In Whirlpool Tub, model AMZ3260RWH, in white. The image highlights the right-side door, the internal seat, whirlpool jets, and the chrome 4-piece faucet set with a pull-out sprayer. The tub is shown with its support frame.
Image Description: A top-down view of the ANZZI Walk-In Whirlpool Tub, model AMZ3260RWH. This perspective clearly shows the internal layout, including the integrated seat, the placement of the whirlpool jets on both sides, the drain, and the faucet controls on the tub deck. The walk-in door mechanism is also visible.
Operating Instructions
- Entering the Tub: Open the walk-in door. Carefully step into the tub and close the door securely. Ensure the door is fully latched to prevent leaks.
- Filling the Tub: Turn on the hot and cold water using the faucet handles to achieve the desired water temperature. The Quick Fill feature allows for rapid filling. Fill the tub until the water level is above the highest whirlpool jets.
- Activating Whirlpool Jets: Once the tub is filled to the appropriate level, press the button or turn the knob designated for the whirlpool function. The jets will activate, providing hydrotherapy massage.
- Using the Handheld Sprayer: The 4-piece faucet set includes a pull-out sprayer. Lift the sprayer from its cradle and press the trigger or lever to activate water flow for targeted rinsing.
- Adjusting Jet Intensity/Direction: Some jets may have adjustable nozzles to change water flow direction. Refer to the specific jet design for adjustment capabilities.
- Draining the Tub: After use, turn off the whirlpool system and open the drain. The Powered Fast Drain system is designed for efficient water removal. Remain seated until the tub is fully drained before opening the door.
- Exiting the Tub: Once the tub is completely drained, open the walk-in door and carefully step out.
Image Description: A diagram illustrating the two types of hydro-massage jets: whirlpool jets (focused therapeutic bullet jets) and directional spa jets. Both are shown emitting streams of bubbles into water, indicating their function in providing a therapeutic massage.
Image Description: An anatomical diagram of a human back, highlighting the lower back region with red circles indicating the target areas for a deep therapeutic massage from the tub's jets. Water splashes are visible on the right side of the image.
Image Description: A close-up image of the 4-piece Fast Fill faucet set. It features a main spout, separate hot and cold mixing valves, and a 60-inch reach pull-out sprayer. The image highlights the 5.7 GPM flow rate of the faucet.
Maintenance
- Regular Cleaning: Clean the tub surface regularly with a soft cloth and a non-abrasive, mild bathroom cleaner. Avoid harsh chemicals, abrasive pads, or solvents that can damage the acrylic finish.
- Jet Cleaning: Periodically clean the whirlpool jets. Fill the tub with warm water and add a small amount of mild detergent or a specialized jet cleaner. Run the whirlpool system for 10-15 minutes, then drain and rinse thoroughly.
- Faucet Care: Wipe down the chrome faucet and sprayer with a soft cloth after each use to prevent water spots and mineral buildup. Use a non-abrasive chrome cleaner if necessary.
- Drain Maintenance: Regularly check the drain for any hair or debris buildup that could impede drainage. Clean as needed.
- Door Seal: Inspect the door seal periodically for any signs of wear or damage. A damaged seal can lead to leaks. Contact customer service for replacement if needed.
- Avoid Staining: Do not leave items that could stain the tub surface (e.g., hair dyes, strong pigments) in contact with the acrylic for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage from Door | Door not fully latched; damaged door seal; debris on seal. | Ensure door is securely latched. Clean the door seal. Inspect seal for damage and replace if necessary. |
| Whirlpool Jets Not Working | Insufficient water level; power supply issue; motor malfunction. | Ensure water level is above jets. Check GFCI breaker. Verify electrical connections. Contact a qualified technician if issues persist. |
| Slow Draining | Drain clogged with hair or debris. | Remove and clean the drain stopper. Use a drain snake if necessary. Avoid pouring harsh chemicals down the drain. |
| Low Water Pressure from Faucet | Aerator clogged; water supply valves partially closed. | Unscrew and clean the faucet aerator. Ensure hot and cold water supply valves are fully open. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact ANZZI customer support.
Warranty and Support
ANZZI products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty details, registration, or technical support, please refer to the warranty card included with your product or visit the official ANZZI website. Keep your proof of purchase for warranty claims.
For customer service inquiries, please contact ANZZI directly through their website or the contact information provided in your product packaging.
