1. Introduction
Thank you for choosing the HOOBRO Tree Bookshelf with Drawer. This 9-tier standing bookcase is designed to optimize vertical space and provide organized storage for books, CDs, DVDs, and decorative items. Its unique tree-like structure and integrated drawer offer both functionality and a rustic aesthetic for various rooms in your home or office.
This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new bookshelf. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image 1.1: The HOOBRO Tree Bookshelf, Model EBK18SJ01G1, in black finish, showcasing its unique tree-like design and bottom drawer.
2. Safety Information
To ensure safe assembly and use of this product, please adhere to the following guidelines:
- Read All Instructions: Before assembly, carefully read and understand all steps in this manual.
- Keep Children Away: Keep children and pets away from the assembly area. Small parts can be a choking hazard.
- Assemble on a Clean Surface: Assemble the unit on a soft, clean surface (e.g., carpet) to prevent scratches.
- Use Correct Tools: Ensure you have all necessary tools as specified in the package contents.
- Do Not Overtighten: Tighten screws and bolts firmly, but do not overtighten, as this may damage the material.
- Anti-Tip Kit: Always install the included anti-tip kit to secure the bookshelf to the wall. This is crucial to prevent tipping and potential injury, especially in households with children or pets.
- Weight Capacity: Do not exceed the maximum weight capacity of 3 kg per shelf. Distribute weight evenly.
- Stable Placement: Place the bookshelf on a level and stable surface.
- Regular Checks: Periodically check all connections and fasteners to ensure they remain tight.
Image 2.1: Diagram illustrating the installation of the anti-tip kit to secure the bookshelf to a wall, enhancing stability and safety.
3. Package Contents
Before assembly, verify that all parts and hardware listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
Parts List:
- Main Support Frame (Vertical)
- Shelf Panels (9 pieces)
- Base Unit with Drawer Components
- Drawer Front, Sides, Back, and Bottom Panel
Hardware List:
- Screws and Bolts (various sizes, numbered)
- Wooden Dowels
- Drawer Slides and Fasteners
- Drawer Handle
- Anti-Tip Kit (Wall anchor, strap, screws)
- Allen Key (Hex Wrench)
- Instruction Manual
4. Assembly Instructions
Follow these step-by-step instructions for assembling your HOOBRO Tree Bookshelf. All parts are numbered for easy identification. It is recommended to have a Phillips head screwdriver (not included) in addition to the provided Allen key.
- Prepare the Base: Assemble the base unit components according to the diagrams in the included instruction booklet. Ensure all connections are secure.
- Assemble the Drawer: Construct the drawer by attaching the sides, back, and bottom panel to the drawer front. Install the drawer slides and the handle.
- Integrate Drawer into Base: Insert the assembled drawer into the base unit. Test its smooth operation.
- Attach Vertical Support: Secure the main vertical support frame to the top of the base unit using the designated screws.
- Install Shelf Panels: Attach the 9 individual shelf panels to the vertical support frame. Pay attention to the orientation of each shelf to achieve the tree-like design. Ensure each shelf is firmly secured.
- Install Anti-Tip Kit: Once the bookshelf is fully assembled and in its desired location, attach the anti-tip strap to the top rear of the bookshelf and secure it to a wall stud using the provided wall anchor and screw. This step is critical for stability.
- Final Check: Verify that all screws are tightened and the bookshelf is stable.
Image 4.1: Close-up view highlighting key features including the anti-tip mechanism (1), angled shelves (2), integrated drawer (3), and stable base with protective feet (4).
5. Usage Guidelines
To maximize the lifespan and functionality of your bookshelf:
- Load Evenly: Distribute the weight of your items evenly across the shelves. Avoid placing heavy objects on only one side.
- Respect Weight Limits: Do not exceed the stated weight capacity of 3 kg per shelf. Overloading can compromise the structural integrity of the unit.
- Drawer Use: The bottom drawer is designed for discreet storage of smaller items. Avoid placing excessively heavy or bulky items that could impede its smooth operation. The semi-closed bottom compartment can also be used for storage if the drawer is removed.
- Placement: Position the bookshelf away from direct sunlight and excessive moisture to prevent material degradation.
Image 5.1: The integrated drawer of the HOOBRO Tree Bookshelf, shown both closed and open, revealing its storage capacity for small items. The image also shows the option to remove the drawer for an open storage compartment.
6. Maintenance and Care
Proper care will help maintain the appearance and durability of your bookshelf:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Spills: Immediately wipe up any spills to prevent staining or water damage.
- Dusting: Regularly dust the shelves and frame with a dry, soft cloth.
- Avoid Heat: Do not place hot items directly on the surface without protection.
7. Troubleshooting
If you encounter any issues with your bookshelf, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bookshelf is wobbly. | Loose screws; uneven floor; anti-tip kit not installed. | Tighten all screws. Move to a level surface or use shims. Install the anti-tip kit as instructed. |
| Drawer does not slide smoothly. | Improper installation of drawer slides; obstruction; overloaded drawer. | Check drawer slide alignment and ensure they are correctly installed. Remove any obstructions. Reduce drawer contents. |
| Missing parts. | Packaging error. | Review the 'Package Contents' section. Contact HOOBRO customer support with your model number and a description of the missing part. |
8. Product Specifications
- Brand: HOOBRO
- Model Number: EBK18SJ01G1
- Color: Black
- Material: Engineered Wood, Metal
- Overall Dimensions (L x W x H): 18.5 x 34 x 135 cm (7.3 x 13.4 x 53 inches)
- Item Weight: 10.08 kg (22.22 lbs)
- Maximum Weight Capacity per Shelf: 3 kg (6.6 lbs)
- Number of Shelves: 9
- Special Feature: Integrated Drawer
- Assembly Required: Yes
- Country of Origin: China
Image 8.1: Detailed dimensions of the HOOBRO Tree Bookshelf, including the overall height, width, depth, and individual shelf and drawer measurements.
9. Warranty and Support
HOOBRO is committed to providing quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims. For assistance with missing parts, assembly questions, or product defects, please contact HOOBRO customer support through your retailer or the official HOOBRO website.
Contact Information: Please refer to the contact details provided by your point of purchase or visit the official HOOBRO website for support.
