1. Important Safety Information
Please read these instructions carefully before assembly and use. Retain this manual for future reference.
- Ensure the lamp is unplugged before cleaning or performing any maintenance.
- Do not expose the lamp to water or excessive moisture.
- This lamp is designed for indoor use only.
- The integrated LED light source is not replaceable. Do not attempt to open or modify the lamp.
- Keep out of reach of children.
2. Package Contents
Verify that all components are present:
- Unicozin Table Lamp (Base with integrated LED and stem)
- Fabric Lampshade
- Securing Ring
3. Setup Instructions
Follow these steps to assemble your Unicozin Table Lamp:
- Carefully unpack all components from the packaging.
- Locate the securing ring, which may be pre-installed on the lamp holder. Unscrew and remove this ring from the lamp holder.
- Place the fabric lampshade onto the lamp holder, ensuring it sits flush with the base.
- Screw the securing ring back onto the lamp holder to firmly secure the lampshade in place. Do not overtighten.
- Plug the lamp's power cord into a standard 120V AC electrical outlet.
4. Operating Instructions
The Unicozin Table Lamp features intuitive touch controls located on its base.
4.1 Power On/Off
- Power Button (⏻): Tap this button to turn the lamp on or off.
4.2 Brightness Adjustment (Stepless Dimming)
- The lamp offers stepless dimming from 10% to 100% brightness for both CCT and RGB modes.
- To Adjust Brightness: Long press the active CCT or RGB button. The brightness will gradually increase or decrease. Release the button when the desired brightness level is reached.
4.3 Color Temperature (CCT) Selection
- CCT Button: Short tap this button to cycle through three color temperatures:
- 3000K Warm Light: Soft, cozy illumination.
- 4500K Natural Light: Balanced, neutral illumination.
- 6500K White Light: Bright, cool illumination.
4.4 RGB Color Changing Modes
- RGB Button:
- Short Tap: Cycles through 7 distinct RGB colors.
- Long Press: Activates a dynamic RGB gradient mode, where colors smoothly transition.
4.5 USB & Type-C Charging Ports
The lamp base includes convenient charging ports:
- USB-A Port (5V/2A)
- USB Type-C Port (5V/2A)
- These ports can charge mobile phones, tablets, and other electronic devices.
- Note: When charging two devices simultaneously, the output current is 1A per charging port.
5. Maintenance
5.1 Cleaning
- Always unplug the lamp before cleaning.
- Wipe the lamp base and stem with a soft, dry cloth.
- For the fabric lampshade, use a lint roller or a soft brush to remove dust. Do not use liquid cleaners on the lampshade.
5.2 Light Source
The Unicozin Table Lamp uses an integrated 9W LED light source. This LED is designed for long-term use and cannot be removed or replaced. Do not attempt to disassemble the lamp to access the LED.
6. Troubleshooting
If you encounter issues with your lamp, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Not plugged in; power outlet issue; power button not pressed. | Ensure the power cord is securely plugged into a working outlet. Press the power button. Test the outlet with another device. |
| Brightness adjustment not working. | Button not long-pressed; lamp in fixed brightness mode. | Ensure you are long-pressing the CCT or RGB button to activate stepless dimming. |
| Colors not changing in RGB mode. | RGB button not tapped/long-pressed correctly. | Short tap the RGB button to cycle colors. Long press for gradient mode. |
| USB/Type-C charging ports not working. | Lamp not powered on; device cable issue; device not compatible. | Ensure the lamp is powered on. Try a different charging cable or device. Verify device compatibility with 5V/2A output. |
| Lamp flickers when charging two devices. | Overload on charging ports. | This is expected behavior as output current is 1A per port when two devices are connected. If flickering is severe, charge one device at a time. |
7. Product Specifications
| Feature | Specification |
|---|---|
| Model | UZ-TL145 |
| Brand | Unicozin |
| Dimensions | 14.5 inches (Height) |
| Light Source | Integrated 9W LED |
| Brightness | 800 Lumens |
| Color Temperatures (CCT) | 3000K (Warm), 4500K (Natural), 6500K (White) |
| RGB Modes | 7 Static Colors + Dynamic Gradient Mode |
| Dimming | Stepless (10%-100%) |
| Control Method | Touch Control |
| Charging Ports | 1x USB-A (5V/2A), 1x USB Type-C (5V/2A) |
| Input Voltage | 100-265V AC |
| Material | Metal Base, Fabric Shade |
| Indoor/Outdoor Use | Indoor Only |
8. Warranty and Support
Unicozin products are manufactured with quality and performance in mind. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship from the date of purchase. Please refer to your purchase documentation for specific warranty terms and duration.
For technical support, troubleshooting assistance, or warranty claims, please contact Unicozin customer service through the retailer where the product was purchased or visit the official Unicozin website for contact information.
Please have your model number (UZ-TL145) and proof of purchase ready when contacting support.
