Lydsto C2 Portable Carpet & Upholstery Cleaner Machine Instruction Manual

1. Setup

1.1 Unpacking

Carefully remove all components from the packaging. Ensure all parts are present:

• Lydsto C2 Carpet Cleaning Machine (1 unit)
• Brush Head Accessories (2 units)
• User Manual (1 unit)

Image: All components of the Lydsto C2 cleaner, including the main unit, hose, and brush heads.

1.2 Assembling the Cleaner

1. Connect the flexible hose to the suction port on the main unit. Ensure it clicks securely into place.
2. Attach the desired brush head accessory to the end of the hose handle. The cleaner includes two types: a deep cleaning brush head for carpet and couch, and a soft silicone brush head for delicate fabrics like silk or mesh cloth.

Image: Close-up of the two interchangeable brush heads: one for deep cleaning and one soft silicone brush.

Video: Assembly and Features Overview

Video: This video demonstrates the unboxing, assembly of the hose and brush heads, and highlights key features of the Lydsto C2 cleaner.

Video: Detailed Assembly and Usage

Video: This video provides a detailed look at connecting the suction tubing, attaching different brush heads, and preparing the cleaner for use.

2. Operation

2.1 Filling the Water Tanks

The Lydsto C2 features separate tanks for clean water and dirty water.

1. To access the clean water tank, press the release button on the top handle and lift the tank.
2. Fill the clean water tank with water. The tank has a capacity of 2.0 liters (approximately 67.6 fl oz). Hot water up to 122°F (50°C) can be used.
3. Add a low-foaming, mild, and non-irritating cleaning solution to the clean water tank according to your preference. Do not use kitchen cleaner or highly irritating cleaners to avoid damage to the machine.
4. Reinsert the clean water tank into the main unit until it clicks into place.

Image: The Lydsto C2 cleaner showing the separate clean water and dirty water tanks.

2.2 Cleaning Modes

The cleaner offers a 2-in-1 function for effective stain removal:

• Spray: Dispenses cleaning solution onto the stained area.
• Brush: Agitates the stain to loosen dirt.
• Suction: Provides 12Kpa strong suction to extract dirty water and debris.

Image: Diagram illustrating the spray, brush, and 12Kpa suction functions of the cleaner.

2.3 Using the Cleaner

1. Plug the power cord into an electrical outlet.
2. Press the power button on the top of the unit to turn on the cleaner. Select the desired suction power (7KPa or 10KPa, as per product description, though 12Kpa is mentioned in title/image, use 10Kpa as max for consistency with description).
3. Position the brush head over the stained area. Press the spray button on the handle to apply cleaning solution.
4. Gently scrub the area with the brush head to agitate the stain.
5. Move the brush head slowly over the area to allow the strong suction to extract the dirty water.
6. Repeat steps 3-5 as necessary until the stain is removed.

Image: The Lydsto C2 cleaner being used to clean a sofa, demonstrating its handheld application.

Image: Examples of various surfaces the Lydsto C2 can clean, including carpet, car seats, sofas, floors, stairs, curtains, cribs, and toys.

2.4 Drying Function

The Lydsto C2 also features a blow-drying function to help dry cleaned areas.

1. Remove the hose from the suction port.
2. Connect the hose to the air outlet port located on the back of the main unit.
3. Turn on the cleaner and direct the airflow from the hose towards the wet area to assist in drying.

3. Maintenance

3.1 Self-Cleaning Function

The brush head features a self-cleaning function to remove accumulated dirt and debris.

1. After cleaning, ensure the hose is connected to the suction port.
2. Cover the suction hole of the brush head.
3. Press the automatic cleaning button on the brush handle. Water will spray to clean the brush head and hose internally.

3.2 Emptying and Cleaning Tanks

Regularly empty and clean the dirty water tank to maintain hygiene and performance.

1. Remove the dirty water tank from the main unit.
2. Carefully pour out the dirty water.
3. Rinse the dirty water tank thoroughly with clean water.
4. Clean the transparent cover of the brush head by detaching it and rinsing under water.
5. Allow all components to air dry before reassembling.

3.3 Cord Storage

The power cord features an automatic rewind function for convenient storage.

1. When finished using the cleaner, ensure the power cord is unplugged from the outlet.
2. Press the recycling button on the top of the unit. The power cord will automatically retract within 5 seconds.

Image: The Lydsto C2 cleaner highlighting the automatic cord rewind feature and hose storage.

4. Troubleshooting

• No Power: Ensure the power cord is securely plugged into a working electrical outlet. Check if the power button is pressed.
• No Suction or Weak Suction: Verify that the hose is correctly installed into the suction port. Check for any blockages in the hose or brush head. Ensure the dirty water tank is not full.
• No Spray: Check if the clean water tank is filled with water and cleaning solution. Ensure the spray button on the handle is functioning correctly.
• Brush Head Not Cleaning Effectively: Ensure the correct brush head is selected for the surface being cleaned. Use the self-cleaning function to clear debris from the brush.
• Cord Not Retracting: Ensure the power cord is fully extended before attempting to retract. Press the cord rewind button firmly.

If you encounter issues not listed here or if troubleshooting steps do not resolve the problem, please contact customer support.

5. Specifications

6. Warranty & Support

For warranty information, product support, or to purchase replacement parts, please refer to the official Lydsto website or contact their customer service department. Keep your purchase receipt for warranty claims.

Contact information can typically be found on the product packaging or the manufacturer's official website.