1. Introduction
This manual provides essential information for the safe and effective use of your Hanaix 9.6V 3.5Ah Ni-MH Replacement Battery. Please read this manual thoroughly before using the battery to ensure proper operation, maximize battery life, and prevent potential hazards. Keep this manual for future reference.
Safety Information
- Do not disassemble, short circuit, or modify the battery.
- Do not expose the battery to temperatures above 100°C (212°F) or to direct sunlight.
- Do not incinerate or mutilate the battery.
- Keep the battery away from water, moisture, and flammable materials.
- Store the battery in a cool, dry place when not in use.
- Use only with chargers recommended for Ni-MH batteries of this voltage and capacity.
- Dispose of batteries properly according to local regulations.
2. Product Overview
The Hanaix 9.6V 3.5Ah Ni-MH Replacement Battery is designed to provide reliable power for compatible Bosch 9.6V power tools. It features a high capacity for extended run time and incorporates multiple protection mechanisms for safe operation.
Image 1: Front view of the Hanaix 9.6V 3.5Ah Ni-MH Replacement Battery, showcasing its design and form factor.
Image 2: Visual representation of the battery's key specifications: 9.6V Voltage, 3500mAh Capacity, and Ni-MH Cell Type.
Key Features:
- Battery Type: Ni-MH, rechargeable
- Voltage: 9.6V
- Capacity: 3500mAh / 3.5Ah
- Certifications: CE, FCC, and RoHS certified
- Protection: Smart charging, short circuit protection, over-voltage protection, over-charge protection, over-current protection, over-heat protection.
- Memory Effect: No memory effect, allowing charging or discharging as needed without capacity loss.
3. Compatibility
This replacement battery is compatible with a wide range of Bosch 9.6V power tools and replaces several original Bosch battery models. Please verify your tool's model number or original battery part number for compatibility.
Replaces Battery Models:
- BAT048, BAT100, BAT119
- 2607335272, 2607335373, 2607335461
- 2607335260, 2607335524, 2607335540, 2607335529, 2607335682
Compatible Power Tools:
- Bosch PSR960, GSR9.6
- Bosch 23609, 32609, 32609-RT
- Bosch PSR 9.6VE-2, GSR 9.6VE-2
Image 3: Illustration showing the Hanaix battery compatible with various Bosch 9.6V power tools such as drills and screwdrivers.
4. Setup
Initial Charging
- Upon receiving your new battery, it is recommended to fully charge it before first use.
- Connect the battery to a compatible 9.6V Ni-MH battery charger.
- Allow the battery to charge until the charger indicates a full charge (refer to your charger's manual for specific indicators).
Installation into Power Tool
- Ensure the power tool is turned off and disconnected from any power source.
- Align the battery with the battery slot on your power tool.
- Slide the battery firmly into place until it clicks, indicating it is securely locked.
- To remove the battery, press the quick release button (if present on your tool/battery) and slide the battery out.
Image 4: Close-up view illustrating the precise interface design for perfect fit and the quick release button for easy battery removal.
5. Operating
Once installed and charged, the battery is ready for use with your compatible power tool. The Ni-MH chemistry of this battery offers several advantages for daily operation:
- No Memory Effect: This battery can be charged or discharged as needed without loss of capacity, unlike older battery technologies. You do not need to fully discharge the battery before recharging.
- Consistent Power: Provides steady voltage output throughout its discharge cycle for consistent tool performance.
- Extended Run Time: The 3500mAh capacity allows for longer operation compared to lower capacity batteries.
Image 5: Graph comparing the higher capacity and longer run time of the 3500mAh Hanaix battery versus a standard 2500mAh battery over time.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your battery.
Charging Practices
- Always use a charger specifically designed for Ni-MH batteries.
- Avoid overcharging for extended periods beyond the charger's full indication.
- Charge the battery in a well-ventilated area, away from direct sunlight or extreme temperatures.
Storage
- For long-term storage, store the battery in a cool, dry place, ideally between 0°C and 25°C (32°F and 77°F).
- Store the battery with a partial charge (around 50%) to prevent deep discharge over time.
- Avoid storing the battery in direct sunlight or areas with high humidity.
- If storing for extended periods, periodically check the charge level and recharge if necessary to prevent deep discharge.
Cleaning
- Keep battery terminals clean and free from dirt or corrosion. Use a clean, dry cloth to wipe them if necessary.
- Do not use solvents or abrasive cleaners on the battery.
Image 6: Diagram illustrating the multiple safety protections integrated into the battery, including over-heat, over-charge, over-current, short-circuit, and over-voltage protection.
7. Troubleshooting
If you encounter issues with your battery, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging | Charger malfunction, poor connection, battery too hot/cold, faulty battery. | Check charger connection and functionality. Ensure battery terminals are clean. Allow battery to reach room temperature. If problem persists, contact support. |
| Short run time | Battery not fully charged, old battery, heavy tool usage, extreme temperatures. | Ensure battery is fully charged. Avoid operating in extreme heat or cold. If battery is old, consider replacement. |
| Battery not fitting tool | Incorrect tool model, debris in battery slot. | Verify tool model compatibility. Clean battery slot of any obstructions. Do not force the battery. |
8. Specifications
Detailed technical specifications for the Hanaix 9.6V 3.5Ah Ni-MH Replacement Battery.
| Specification | Value |
|---|---|
| Battery Type | Ni-MH |
| Battery Voltage | 9.6 V |
| Battery Capacity | 3500 mAh (3.5 Ah) |
| Item Weight | 1.15 pounds |
| Package Dimensions | 5.2 x 4.92 x 4.17 inches |
| Manufacturer | Hanaix |
| Recommended Uses | Power Tool |
Image 7: View of the battery's bottom label, displaying the Hanaix brand, 9.6V Ni-MH, 3500mAh capacity, and replacement model BAT100, along with safety certifications.
9. Warranty and Support
Hanaix stands behind the quality of its products.
Warranty Information
This product includes a 1-month full refund, conditional refund, or replacement for a new battery if there is any quality problem. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, concerns, or technical assistance regarding your Hanaix battery, please contact the manufacturer or your retailer. Refer to your purchase documentation for specific contact details.