1. Introduction
Thank you for choosing the Tatybo Wireless Gaming Headset WT01. This headset is designed to provide a high-quality audio experience for gaming across multiple platforms, including PS4, PS5, PC, Switch, Mac, and mobile phones. It features 2.4GHz wireless connectivity for low-latency audio, a detachable noise-canceling microphone, and a comfortable design for extended use. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance.
Image 1.1: Tatybo Wireless Gaming Headset WT01. This image displays the headset in black and red, featuring the detachable microphone and the USB-C dongle.
2. Safety Information
- Do not expose the headset to extreme temperatures, humidity, or corrosive environments.
- Avoid dropping or subjecting the headset to strong impacts.
- Do not attempt to disassemble or modify the headset. This may void the warranty and cause damage.
- Keep the headset away from water and other liquids.
- Listen at moderate volume levels to prevent hearing damage.
- Ensure the microphone is inserted into the correct port (marked with a microphone icon) to prevent damage or malfunction. Do not insert it into the 3.5mm audio jack.
3. Package Contents
Verify that all items are present in the package:
- 1x Tatybo Wireless Gaming Headset WT01
- 1x USB & Type-C Dual Dongle
- 1x Detachable Microphone
- 1x 3.5 mm Audio Cable
- 1x Type-C Charging Cable
- 1x User Manual (This document)
4. Product Overview
Familiarize yourself with the components and controls of your Tatybo WT01 headset.
Image 4.1: Headset Control Layout. This diagram illustrates the location of the microphone mute button, volume control, 7.1 surround sound/RGB light button, power ON/OFF button, detachable mic port, 3.5mm jack, Bluetooth/2.4G switch, and Type-C charging port.
Headset Components:
- Adjustable Headband: For a comfortable fit.
- Memory-Protein Ear Pads: Soft and breathable for extended wear.
- Detachable Microphone: Flexible, omnidirectional, and noise-canceling for clear communication.
- 50mm Large Audio Drivers: Deliver immersive sound.
Controls:
- Power ON/OFF Button: Long press to power on or off.
- Volume Control: Adjusts audio output level.
- Microphone Mute Button: Mutes or unmutes the microphone.
- 7.1 Surround Sound/RGB Light Button: Toggles 7.1 surround sound or RGB lighting effects.
- Bluetooth/2.4G Switch: Selects the desired wireless connection mode.
5. Setup
5.1 Charging the Headset
- Connect the supplied Type-C charging cable to the charging port on the headset.
- Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The LED indicator on the headset will show charging status. A full charge takes approximately 3 hours and provides over 30 hours of battery life.
5.2 Attaching the Microphone
- Locate the microphone port on the headset, indicated by a microphone icon.
- Carefully insert the detachable microphone into this port. Ensure it is fully seated.
- Important: Do not insert the microphone into the 3.5mm audio jack. Incorrect insertion may cause damage or prevent the headset from functioning correctly.
Image 5.1: Detachable Microphone Connection. This image shows the flexible, noise-canceling microphone being inserted into its dedicated port on the headset.
5.3 Connecting to Devices (2.4GHz Wireless)
The 2.4GHz wireless connection offers ultra-low latency for an optimal gaming experience.
- Power on the headset by long-pressing the Power ON/OFF button.
- Set the headset's connection switch to the 2.4G position.
- Insert the USB & Type-C dual dongle into an available USB-A or USB-C port on your gaming device (PS4, PS5, PC, Switch in docked mode, Mac).
- The headset and dongle should automatically pair. The LED indicator on the headset will confirm a successful connection.
- On your device, ensure the Tatybo headset is selected as the audio output and input device in the sound settings.
Image 5.2: Multi-platform Connectivity. This image illustrates the headset connecting wirelessly to various gaming platforms including PC, PS5, and Nintendo Switch.
5.4 Connecting to Devices (3.5mm Wired)
For devices without USB ports or when wireless is not preferred, use the 3.5mm audio cable.
- Connect one end of the 3.5mm audio cable to the 3.5mm jack on the headset.
- Connect the other end of the cable to the 3.5mm audio port on your device (e.g., PS4/PS5 controller, PC, Switch, mobile phone).
- The headset will operate in passive mode, meaning the headset's power and RGB lighting will not function, but audio and microphone will work.
6. Operating Instructions
6.1 Power On/Off
- To Power On: Long press the Power ON/OFF button until the LED indicator lights up.
- To Power Off: Long press the Power ON/OFF button until the LED indicator turns off.
6.2 Adjusting Volume
- Use the volume control wheel on the headset to increase or decrease the audio volume.
6.3 Microphone Usage
- Mute/Unmute: Press the microphone mute button to toggle the microphone on or off. The LED indicator may change color to show mute status.
- Adjust the flexible microphone boom for optimal voice pickup.
6.4 7.1 Surround Sound and RGB Lighting
- Press the 7.1 Surround Sound/RGB Light button to activate or deactivate 7.1 surround sound (if supported by your device and content).
- Press the same button to cycle through or turn off the RGB lighting effects on the earcups.
6.5 Switching Connection Modes
- Use the Bluetooth/2.4G switch on the headset to select between 2.4GHz wireless mode and Bluetooth mode (if applicable, though this model primarily uses 2.4GHz and 3.5mm wired).
7. Maintenance
7.1 Cleaning
- Wipe the headset surfaces with a soft, dry cloth.
- For stubborn dirt, use a slightly damp cloth with mild soap, then wipe dry immediately.
- Do not use harsh chemicals, solvents, or abrasive cleaners.
- Avoid getting moisture into the ports or speaker grilles.
7.2 Storage
- Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- The headset features a compact foldable design for easy storage and portability.
Image 7.1: Foldable Design. This image demonstrates the headset's ability to fold for compact storage and portability.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from headset (wireless) | Headset not powered on; Not paired; Incorrect audio output selected on device; Dongle not properly inserted. | Ensure headset is powered on and charged. Verify dongle is securely inserted. Check device sound settings to ensure Tatybo headset is selected as output. |
| Microphone not working | Microphone muted; Microphone not properly inserted; Incorrect audio input selected on device. | Press the microphone mute button to unmute. Re-insert the microphone firmly into its dedicated port. Check device sound settings to ensure Tatybo headset is selected as input. |
| Poor sound quality / Disconnections | Interference; Low battery; Distance from dongle. | Ensure headset is fully charged. Reduce distance between headset and dongle. Avoid strong electromagnetic interference sources. |
| Headset not charging | Charging cable or port issue; Power source issue. | Ensure charging cable is securely connected to both headset and power source. Try a different USB port or power adapter. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Name | WT01 |
| Connectivity Technology | 2.4GHz Wireless, 3.5mm Wired |
| Wireless Communication | 2.4GHz |
| Headphones Jack | 3.5 mm Jack |
| Compatible Devices | PS4, PS5, PC, Switch, Mac, Mobile Phones |
| Microphone | Detachable, Noise-Canceling, Omnidirectional |
| Battery Life | Over 30 hours (on a single charge) |
| Charging Time | Approximately 3 Hours |
| Material | Faux Leather (ear pads) |
| Special Features | Adjustable Headband, Detachable Cable, Microphone Included, Noise Isolation, Surround Sound, Foldable Design |
| Item Weight | 1.02 pounds |
| Manufacturer | Tatybo |
10. Warranty and Support
10.1 Warranty Information
The Tatybo Wireless Gaming Headset WT01 comes with a three-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use.
The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
10.2 Customer Support
If you encounter any issues or have questions regarding your Tatybo Wireless Gaming Headset WT01, please contact our customer support team. You can typically find contact information on the product packaging, the official Tatybo website, or through your purchase platform.
When contacting support, please provide your product model (WT01) and a detailed description of the issue.
