FightBox B1-MINI-PC All Button Leverless Arcade Fight Stick Game Controller User Manual

1. Introduction

Thank you for choosing the FightBox B1-MINI-PC All Button Leverless Arcade Fight Stick Game Controller. This compact and high-performance controller is designed for fighting game enthusiasts, offering precise input and a comfortable gaming experience across multiple platforms including PC, PlayStation 3, and Nintendo Switch. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Image 1.1: The FightBox B1-MINI-PC controller, showcasing its compact design and button layout.

2. Key Features

• All Button Leverless Layout: Provides precise and rapid input for fighting games without a traditional joystick.
• Portable Design: Ultra-thin and ultra-small, making it easy to carry for gaming on the go.
• Cherry MX Black Key Switches: Equipped with high-quality Cherry MX Black switches for durable and responsive button presses.
• Hot-swappable Support: Allows for easy customization and replacement of key switches.
• Professional Arcade Fighting Board: Ensures extreme speed and minimized input delay for competitive play.
• SOCD Supported: Complies with tournament standards for all-button leverless style game controllers.
• Multi-Platform Compatibility: Works with PC, PlayStation 3, and Nintendo Switch.

Image 2.1: A close-up view of a Cherry MX Black key switch, known for its linear feel and durability.

3. Setup Instructions

3.1 Connecting to PC

1. Ensure your PC is powered on.
2. Connect the USB Type-C end of the provided cable to the FightBox B1-MINI-PC controller.
3. Connect the standard USB-A end of the cable to an available USB port on your PC.
4. The controller should be automatically recognized by your operating system as a PC360 device (default mode).
5. You may need to install game-specific drivers or configure controls within your game settings.

3.2 Connecting to PlayStation 3 (PS3)

1. Power on your PS3 console.
2. Connect the USB Type-C end of the provided cable to the FightBox B1-MINI-PC controller.
3. Connect the standard USB-A end of the cable to an available USB port on your PS3.
4. The PS3 should recognize the controller. You may need to assign it to a player slot in the PS3 system settings.

3.3 Connecting to Nintendo Switch

1. Ensure your Nintendo Switch is powered on and docked, or use a USB-C to USB-A adapter for handheld mode (not included).
2. Go to System Settings > Controllers and Sensors > Pro Controller Wired Communication and ensure it is set to "On".
3. Connect the USB Type-C end of the provided cable to the FightBox B1-MINI-PC controller.
4. Connect the standard USB-A end of the cable to an available USB port on the Switch dock.
5. The Switch should recognize the controller.

Image 3.1: The USB Type-C port for connecting the controller to various devices.

4. Operating Instructions

4.1 Button Layout (PC Version)

The FightBox B1-MINI-PC features a standard all-button leverless layout. Refer to the image below for the button assignments in PC mode.

Image 4.1: Button assignments for the FightBox B1-MINI-PC in PC mode. The red buttons on the left are directional inputs (Up, Down, Left, Right), with an additional red button for Jump/Up. The black buttons on the right are action buttons (Y, R1, L1, X, B, R2, L2, A). Small black buttons on the top left are HOME, MODE, L3, and on the top right are START, SELECT, R3.

• The HOME button is used to switch between PC360 mode (default) and other modes.
• The MODE button is used to switch between the cross keys (D-pad) and the left/right stick inputs.

4.2 SOCD Modes

The controller supports three different Simultaneous Opposing Cardinal Directions (SOCD) modes, which determine how conflicting directional inputs are resolved. This is crucial for competitive play and tournament compliance.

Image 4.2: Table illustrating the three supported SOCD modes: Up priority, Neutral (CAPCOM), and Last win. It shows how conflicting inputs (e.g., Left + Right, Up + Down) are resolved in each mode.

• Up Priority SOCD Mode (Default): When Up and Down are pressed simultaneously, Up is prioritized. When Left and Right are pressed simultaneously, both inputs are canceled, resulting in Neutral.
• Neutral (CAPCOM) SOCD Mode: When opposing directions (Up + Down or Left + Right) are pressed simultaneously, both inputs are canceled, resulting in Neutral.
• Last Win SOCD Mode: The last directional input pressed takes precedence. For example, if Left is held and then Right is pressed, Right will be the active input.

To switch between SOCD modes, refer to the specific key combinations or software utility provided by FightBox (if applicable, check official FightBox website for advanced settings).

4.3 Hot-Swappable Key Switches

The FightBox B1-MINI-PC supports hot-swappable Cherry MX Black key switches. This allows users to easily replace switches without soldering, enabling customization or repair.

1. Power off and disconnect the controller from your device.
2. Using a switch puller tool (not included), carefully grip the key switch you wish to remove.
3. Gently pull the switch straight up until it detaches from the PCB.
4. Align the pins of the new key switch with the sockets on the PCB.
5. Press the new switch firmly into place until it clicks. Ensure it is seated properly and not bent.
6. Reconnect the controller and test the new switch.

5. Maintenance

• Cleaning: Use a soft, dry cloth to wipe down the surface of the controller. For stubborn dirt, a slightly damp cloth with mild soap can be used, but ensure no liquid enters the button mechanisms or USB port.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. Prolonged exposure to sunlight can cause the vinyl-like material to separate, as noted by user feedback.
• Cable Care: Avoid sharp bends or kinks in the USB cable. Disconnect by pulling the plug, not the cable itself.
• Button Longevity: While Cherry MX switches are durable, avoid excessive force or impact on the buttons to prolong their lifespan.

6. Troubleshooting

7. Specifications

• Model: B1-MINI-PC
• Compatibility: PC, PlayStation 3, Nintendo Switch
• Input Type: All Button Leverless
• Key Switches: Cherry MX Black (Hot-swappable)
• Connectivity: USB Type-C
• Dimensions: Approximately 9.29 x 4.92 x 0.67 inches (23.6 x 12.5 x 1.7 cm)
• Weight: Approximately 2.42 pounds (1.1 kg)
• SOCD Support: Up Priority, Neutral (CAPCOM), Last Win
• Manufacturer: FightBox

Image 7.1: Diagram showing the dimensions of the FightBox B1-MINI-PC controller (23.6cm length, 12.5cm width, 1.7cm height) and its weight (0.55kg, note: JSON says 2.42 pounds which is ~1.1kg, I will use the JSON value for text and note the image discrepancy).

Note: The image indicates a weight of 0.55kg, while product specifications list 2.42 pounds (approximately 1.1kg). Please refer to the written specifications for the most accurate weight information.

8. Warranty and Support

For warranty information, technical support, or further assistance with your FightBox B1-MINI-PC controller, please refer to the official FightBox website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

You can visit the official FightBox store on Amazon for more product details and to contact the seller: FightBox Amazon Store.

9. Product Video Demonstration