FightBox B1-PS5 All Button Leverless Arcade Fight Stick Game Controller User Manual

Introduction

This manual provides detailed instructions for the FightBox B1-PS5 All Button Leverless Arcade Fight Stick Game Controller. This device is engineered for precise input in fighting games and is compatible with multiple gaming platforms. Please read this manual thoroughly before use to ensure optimal performance and longevity of your controller.

Image: The FightBox B1-PS5 controller, featuring a white acrylic top panel with red and black buttons, viewed from an angled perspective.

Features

• All Button Leverless Layout: Provides precise and rapid input for fighting games without a traditional joystick.
• Portable Design: Easy to carry with its ultra-thin and compact size.
• Cherry MX Black Key Switches: Equipped with durable and responsive Cherry MX Black switches, supporting hot-swappable functionality for customization.
• Professional Brook Fighting Board: Integrates a high-performance Brook Fighting Board for extreme speed and minimized input delay.
• SOCD Support: Supports various Simultaneous Opposite Cardinal Direction (SOCD) modes, adhering to tournament standards for all-button leverless controllers.

Image: A close-up view of a Cherry MX Black key switch, highlighting its design and mechanism.

Image: A circuit board labeled 'Brook Fighting Board', illustrating the internal electronics responsible for low-latency performance.

Package Contents

Please verify that all items are present in the package:

• FightBox B1-PS5 All Button Leverless Arcade Fight Stick Game Controller
• USB Connection Cable
• User Manual (this document)

Setup

Follow these steps to set up your FightBox B1-PS5 controller:

1. Connect the USB Cable: Locate the USB port on the side of the FightBox B1-PS5 controller. Insert one end of the provided USB cable into this port.
2. Connect to Your Device: Plug the other end of the USB cable into an available USB port on your PC, PlayStation 3, PlayStation 4, or PlayStation 5 console.
3. System Recognition: Your system should automatically detect the controller. For PlayStation consoles, you may need to assign the controller to a user profile.

Image: A side view of the FightBox B1-PS5 controller, clearly showing the USB port for connection.

Operating Instructions

The FightBox B1-PS5 features an all-button layout designed for intuitive and responsive gameplay.

Button Layout (PS Version)

Refer to the image below for the standard button assignments for PlayStation versions:

Image: The top panel of the FightBox B1-PS5 controller, with labels indicating the function of each button for PlayStation compatibility, including HOME, OPTION, SHARE, TOUCHPAD, R3, L3, and TURBO, as well as directional and action buttons.

• Directional Buttons: The four red buttons on the left control movement (Up, Down, Left, Right).
• Action Buttons: The black buttons on the right correspond to standard PlayStation action buttons (e.g., Square, Triangle, Circle, X, R1, R2, L1, L2).
• System Buttons: White buttons along the top row include HOME, OPTION, SHARE, TOUCHPAD, R3, L3, and TURBO. The TOUCHPAD button functions as the touch pad button on a standard PS controller.

SOCD Modes

The controller supports three Simultaneous Opposite Cardinal Direction (SOCD) modes to comply with various tournament rules and player preferences. These modes determine how conflicting directional inputs are resolved.

Image: A table detailing the three supported SOCD modes: Up priority, Neutral (CAPCOM), and Last win, showing how conflicting directional inputs (e.g., Left + Right, Up + Down) are resolved in each mode.

• Up Priority SOCD Mode (Default): When both Up and Down are pressed, Up input is prioritized. When Left and Right are pressed, the input is neutral.
• Neutral (CAPCOM) SOCD Mode: When opposite directions are pressed simultaneously (e.g., Left + Right or Up + Down), both inputs are cancelled, resulting in a neutral state.
• Last Win SOCD Mode: The last directional input pressed takes precedence. For example, if Left is held and then Right is pressed, Right will be the active input.

Consult the provided table for specific input resolutions for each SOCD mode. The method for switching between SOCD modes may vary; refer to the manufacturer's official website or additional documentation for specific button combinations.

Compatibility

The FightBox B1-PS5 controller is compatible with the following platforms:

• PC
• PlayStation 3 (PS3)
• PlayStation 4 (PS4)
• PlayStation 5 (PS5)

Maintenance

To ensure the longevity and optimal performance of your FightBox B1-PS5 controller, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe down the surface of the controller. For stubborn smudges, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Cable Care: Avoid sharp bends or kinks in the USB cable. Disconnect by pulling the plug, not the cable itself.
• Hot-Swappable Switches: The Cherry MX Black key switches are hot-swappable. If a switch needs replacement, carefully remove it using a switch puller and insert a new compatible switch. Ensure proper alignment to avoid damaging the pins or socket.

Troubleshooting

If you encounter issues with your FightBox B1-PS5 controller, try the following solutions:

• Controller Not Recognized:
  • Ensure the USB cable is securely connected to both the controller and the gaming device.
  • Try a different USB port on your PC or console.
  • Test the controller on another compatible device to rule out a system-specific issue.
  • Restart your PC or console.
• Buttons Not Responding:
  • Check for any physical obstructions or debris under the buttons.
  • If a specific button is unresponsive, and you are comfortable with it, consider hot-swapping the switch with a known working one to diagnose if the switch itself is faulty.
• Input Lag:
  • Ensure you are using the provided USB cable or a high-quality replacement.
  • Connect the controller directly to your console/PC, avoiding USB hubs if possible.
  • Verify that your gaming device's drivers are up to date (for PC).

If these steps do not resolve the issue, please contact FightBox customer support for further assistance.

Specifications

Detailed specifications for the FightBox B1-PS5 controller:

Image: A diagram illustrating the dimensions of the FightBox B1-PS5 controller, showing its length (30cm), width (18.8cm), height (1.9cm), and weight (1.2kg).

Warranty and Support

FightBox products are manufactured with quality and reliability in mind. For information regarding warranty coverage, technical support, or service, please refer to the official FightBox website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.