OMNIHIL OMNI0126024117

OMNIHIL Wall Charger and USB-C Cable Instruction Manual

Model: OMNI0126024117

1. Product Overview

This manual provides instructions for the OMNIHIL Wall Charger and USB-C to USB-C Cable, designed for efficient charging of compatible electronic devices, including the Energizer MAX 20,000mAh Power Bank Model UE20044. This product is a third-party accessory, not an OEM part.

OMNIHIL Wall Charger and USB-C Cable with packaging

Image 1.1: The OMNIHIL Wall Charger and USB-C to USB-C Cable, shown with its packaging.

Key Features:

2. Setup Instructions

Follow these steps to set up your OMNIHIL Wall Charger and USB-C Cable for use.

  1. Unpack Components: Carefully remove the wall charger and USB-C to USB-C cable from their packaging.
  2. Inspect for Damage: Before use, visually inspect both the charger and the cable for any signs of physical damage. Do not use if damaged.
  3. Connect Cable to Charger: Insert one end of the USB-C to USB-C cable into the USB-C port on the OMNIHIL Wall Charger. Ensure a firm connection.
  4. OMNIHIL Wall Charger with USB-C cable connected

    Image 2.1: The OMNIHIL Wall Charger with the USB-C cable connected to its port.

  5. Connect to Power Bank/Device: Insert the other end of the USB-C to USB-C cable into the charging port of your compatible device, such as the Energizer MAX 20,000mAh Power Bank (Model UE20044).
  6. Plug into Wall Outlet: Insert the prongs of the OMNIHIL Wall Charger into a standard AC wall outlet (100 Volts AC).
  7. OMNIHIL Wall Charger showing electrical prongs

    Image 2.2: The OMNIHIL Wall Charger displaying its electrical prongs for wall outlet connection.

  8. Verify Charging: Confirm that your device indicates it is charging.

3. Operating Instructions

The OMNIHIL Wall Charger and USB-C Cable are designed for straightforward operation.

Close-up of OMNIHIL Wall Charger USB-C port

Image 3.1: A close-up view of the USB-C port on the OMNIHIL Wall Charger.

4. Maintenance

Proper care and maintenance will extend the lifespan of your OMNIHIL Wall Charger and USB-C Cable.

5. Troubleshooting

If you encounter issues with your OMNIHIL Wall Charger and USB-C Cable, refer to the following common solutions.

ProblemPossible CauseSolution
Device not charging.
  • Loose connection.
  • Faulty wall outlet.
  • Damaged cable or charger.
  • Incompatible device.
  • Ensure all connections are secure.
  • Try a different wall outlet.
  • Inspect cable and charger for damage. Replace if necessary.
  • Verify your device supports USB-C charging.
Slow charging.
  • Device drawing more power than supplied.
  • Background apps consuming power.
  • Cable or charger issue.
  • Close unnecessary applications on your device.
  • Ensure the cable is a High Speed 3.0 USB Cable.
  • Try a different compatible cable or charger to isolate the issue.
Charger or cable feels hot.
  • Normal operation (slight warmth).
  • Overload or short circuit.
  • A slight warmth during charging is normal.
  • If it becomes excessively hot, disconnect immediately and cease use. Contact support.

6. Specifications

Technical specifications for the OMNIHIL Wall Charger and USB-C Cable.

OMNIHIL Wall Charger with detailed label showing specifications

Image 6.1: The OMNIHIL Wall Charger's label, detailing model, input, and output specifications.

7. Warranty and Support

OMNIHIL provides support and warranty for this product.

Documents - OMNIHIL – OMNI0126024117

no relevant documents