Introduction
The Acmount W160 is a versatile 12-volt portable device designed for vehicle emergencies and tire maintenance. It combines a powerful jump starter with a 150PSI air compressor, a power bank, and an LED flashlight. This manual provides essential information for safe and effective operation of your device.
Image: Overview of Acmount W160's multiple functions.
Product Components
The Acmount W160 package includes the following items:
- W160 Jump Starter Unit
- 12V Battery Jumper Cables
- USB-C Charging Cable
- User Manual
- Portable Storage Bag
- Air Hose
- 4 Air Nozzles (for various inflation needs)
Image: All items included in the Acmount W160 product box.
Setup and Charging
Before initial use, fully charge the Acmount W160 unit using the provided USB-C charging cable. It is recommended to charge the battery jump starter every 2-3 months if not used for a long time to maintain battery health. Always ensure battery power is above 50% before attempting to jump-start a vehicle.
Operating Instructions
1. Jump Starting a Vehicle
The W160 5000A car jump starter is designed for 12-volt vehicles, capable of jump-starting 9-liter gasoline and 8-liter diesel cars. It functions flawlessly in extreme temperatures ranging from -4℉ to 140℉.
- Connect the jump cable to the W160 unit.
- Connect the red clamp to the positive (+) terminal of the vehicle battery.
- Connect the black clamp to the negative (-) terminal of the vehicle battery.
- Ensure the jump cable indicator light turns green. For completely dead batteries, the light may flash red and green; press the 'Boost' button until it turns solid green.
- Start the vehicle within 60 seconds.
- Once the vehicle starts, disconnect the clamps from the battery, then disconnect the jump cable from the W160 unit.
Image: Acmount W160 in use for jump starting a 12V car battery.
Image: Step-by-step guide for connecting the jump starter and starting the engine.
Video: Official Acmount demonstration of the jump starter and air compressor functions.
2. Tire Inflation
The built-in 150PSI air pump features preset & auto-off functions, 5 modes (car/motorcycle/bicycle/basketball/custom), and 4 different nozzles. Supports PSI, Bar, Kpa units.
- Connect the air hose to the W160 unit and the tire valve.
- Turn on the unit. The screen will display the current tire pressure.
- Short press the 'M' (Mode) button to switch between 5 inflation modes (car, motorcycle, bicycle, ball, custom).
- Use the '+' and '-' buttons to adjust the target pressure.
- Press the power button to start inflation. The pump will automatically stop when the target pressure is reached.
- Disconnect the air hose.
Image: Acmount W160 functioning as a fast portable tire inflator.
Image: Step-by-step guide for connecting the air hose, setting pressure, and inflating.
3. Power Bank Function
The W160 serves as a portable power pack with dual USB output ports (USB1-OUT, USB2-OUT) and a USB-C IN port. It can provide power supply for phones, tablets, and other devices (adapter not included).
Image: Acmount W160 used as an emergency power bank.
4. LED Flashlight
Press the light button to switch between 3 LED light modes: Flashlight, SOS, and Strobe. This feature is useful for camping, outdoors, emergencies, and travel.
Image: Acmount W160's outdoor emergency flashlight with multiple modes.
Safety Guidelines
The W160 is designed with 10 built-in safety protection technologies against short circuits, over-temperature, reverse polarity, reverse-charge, etc. No sparks are generated, making it user-friendly for novices. Always ensure the battery power of the jump starter is above 50% before use.
Image: Acmount W160's safety features for secure operation.
Maintenance
If not used for a long time, it is recommended to charge the battery jump starter every 2-3 months to keep the battery pack in a healthy state.
Specifications
- Brand: Acmount
- Model: W160
- Product Dimensions: 5.2"D x 9.8"W x 4.2"H
- Item Weight: 1.03 Kilograms (2.27 pounds)
- Amperage: 5000 Amps
- Peak Output Current: 5000 Amps
- Batteries: 1 Lithium Ion battery required (included)
- Engine Compatibility: Up to 9L Gas / 8L Diesel (12-volt vehicles)
- Tire Inflator Pressure: 150 PSI
- Operating Temperature: -4℉ to 140℉
Warranty and Support
A one-year warranty is provided for the Acmount W160. For any operational issues or product-related problems, please contact our after-sales team immediately for assistance.
