1. Introduction
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your JAXPETY Wall Floating Nightstand Set. Please read this guide thoroughly before beginning assembly to ensure safe and correct usage. Keep this manual for future reference.
2. Safety Information
Important Safety Precautions:
- Always follow the assembly instructions carefully to avoid injury.
- Ensure the nightstand is securely mounted to a sturdy wall structure (e.g., wall studs) to prevent tipping.
- Do not exceed the maximum weight recommendation of 33 pounds (15 kg) for the nightstand. Overloading can cause the unit to detach from the wall, leading to injury or damage.
- Keep all small parts and packaging materials away from children and pets to prevent choking hazards.
- Use appropriate tools as specified in the assembly guide.
3. Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Nightstand Panels (top, bottom, sides, back, door)
- Mounting Hardware (screws, wall anchors, brackets)
- Door Handle
- Assembly Guide (this document)
4. Setup and Assembly
Assembly of the JAXPETY Wall Floating Nightstand requires careful attention to detail. A professional manual is included with your purchase for step-by-step guidance. The estimated assembly time is approximately 30-45 minutes per unit.
4.1 Tools Required
- Screwdriver (Phillips head recommended)
- Drill (for wall mounting)
- Measuring Tape
- Level
- Pencil
4.2 Assembly Steps
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble the Cabinet Body: Follow the included assembly guide to connect the top, bottom, side, and back panels using the provided screws. Ensure all connections are tight and secure.
- Install the Door: The door can be installed to open either to the left or to the right, allowing for reversible configuration. Attach the hinges to the door and then to the cabinet body according to your preferred opening direction.
- Attach the Handle: Secure the handle to the door.
- Prepare for Wall Mounting: Determine the desired height and location for your nightstand. Use a level and pencil to mark the mounting points on the wall. It is highly recommended to mount the nightstand into wall studs for maximum stability. If studs are not available, use appropriate heavy-duty wall anchors suitable for your wall type.
- Mount the Nightstand: Drill pilot holes at the marked locations. Secure the mounting brackets to the wall, then attach the nightstand to the brackets using the expansion screws. Ensure the nightstand is level and firmly attached to the wall before placing any items on it.
Tip for Wall Mounting: Instead of relying solely on provided measurements, use a tape measure to directly mark the distance between the mounting holes on the nightstand onto your wall. This can help ensure accurate placement and a level installation, especially when dealing with metric conversions or slight manufacturing variances.
Figure 1: Product Dimensions (Width: 16.8", Depth: 13", Height: 12.8")
Figure 2: Reversible Door Installation
5. Operating Instructions
The JAXPETY Wall Floating Nightstand is designed for convenient storage and display in various rooms.
- Storage: Utilize the open compartment for easy access items like books, remote controls, or decorative pieces. The cabinet with a door provides concealed storage for personal items, snacks, or other small articles.
- Surface Use: The top surface can accommodate items such as a lamp, alarm clock, or small electronic devices. Ensure the total weight on the nightstand does not exceed 33 pounds.
- Space Optimization: The floating design allows for easy cleaning underneath and provides an unobstructed floor area, which is particularly beneficial for robotic vacuums.
Figure 3: Floating design allows for easy floor cleaning.
6. Maintenance
To maintain the appearance and longevity of your nightstand:
- Cleaning: Wipe the surface with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
- Inspection: Periodically check all mounting screws and connections to ensure they remain tight and secure. Retighten if necessary.
- Weight Limit: Always adhere to the maximum weight recommendation of 33 pounds to prevent structural damage or detachment.
7. Troubleshooting
If you encounter issues during assembly or use, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Nightstand is not level or flush against the wall. | Inaccurate measurement or drilling; insufficient wall support. | Re-measure and re-drill mounting holes carefully. Ensure mounting into wall studs or use appropriate heavy-duty wall anchors. Use a level during installation. |
| Door does not close properly or is misaligned. | Hinges are not correctly installed or adjusted. | Check hinge alignment and adjust screws as needed. Ensure the cabinet body is assembled squarely. |
| Nightstand feels unstable after mounting. | Loose mounting screws; inadequate wall anchors; wall material not strong enough. | Tighten all mounting screws. Verify that the wall anchors are suitable for your wall type and installed correctly. Consider relocating to a wall with stud support. Do not exceed weight limit. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | JAXPETY |
| Model Number | HG61G1305-A02 |
| Product Dimensions (D x W x H) | 13"D x 16.8"W x 12.8"H |
| Item Weight | 33.06 Pounds (per set of 2) |
| Maximum Weight Recommendation | 33 Pounds (15 kg) |
| Frame Material | Engineered Wood |
| Color | White |
| Handle Color | Gold |
| Number of Doors | 1 (per unit) |
| Base Type | Floating |
| Recommended Uses | Bedside Table, Living Room Storage, Decorative Shelf |
| Product Care Instructions | Wipe with Damp Cloth |
9. Warranty Information
Specific warranty details for the JAXPETY Wall Floating Nightstand Set are typically provided with your purchase documentation or can be obtained directly from the manufacturer. Please retain your proof of purchase for any warranty claims.
10. Customer Support
For further assistance, missing parts, or questions regarding your JAXPETY Wall Floating Nightstand Set, please contact JAXPETY customer service. Refer to your purchase receipt or the JAXPETY official website for contact information.