1. Product Overview
The Genmitsu 3018-PROVer V2 is an upgraded desktop CNC router machine designed for precision carving, engraving, and milling. It features GRBL v1.1 open-source control, enhanced Toshiba TB6S109 drivers with 32-bit chips, and expanded functionality ports. This machine is ideal for hobbyists, educators, and small businesses looking to perform detailed work on various materials.
Key features include:
- Upgraded Control System: Based on open-source Grbl v1.1 with more powerful and silent Toshiba TB6S109 drivers.
- Extended Functionality: Includes 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port for versatile applications.
- Easy Assembly: Pre-assembled accessories allow for setup in less than 20 minutes.
- Durable Spoilboard: Comes with a one-piece machined and molded aluminum spoilboard ensuring flatness and strength.
- 3040 Extension Compatibility: Seamlessly integrates with the 3018PROVer-V2 Y-Axis Extension Kit to expand the work area from 3018 to 3040.
- Innovative Joint Design: Utilizes a 4mm sheet metal connector for the spoilboard, maintaining Y-axis travel.
2. Safety Information
Operating a CNC machine requires adherence to safety protocols to prevent injury and damage. Always read and understand all instructions before operation.
- Eye Protection: Always wear safety glasses or goggles to protect your eyes from flying debris.
- Hearing Protection: Use hearing protection, especially during prolonged operation, as the machine can generate noise.
- Dust Mask: Wear a dust mask to avoid inhaling fine particles generated during carving.
- Secure Workpiece: Ensure the workpiece is firmly clamped to the spoilboard to prevent movement during operation.
- Clear Workspace: Keep the work area clear of clutter, tools, and flammable materials.
- Emergency Stop: Familiarize yourself with the location and function of the emergency stop button.
- Unplug When Not in Use: Disconnect power before performing any maintenance, adjustments, or when the machine is not in use.
- Supervision: Never leave the machine unattended during operation.
- Ventilation: Ensure adequate ventilation to disperse dust and fumes.
3. Setup and Assembly
The Genmitsu 3018-PROVer V2 is designed for quick and easy assembly, with many components pre-assembled. Follow the included assembly guide for detailed step-by-step instructions.
3.1 Unpacking and Inspection
Carefully unpack all components and verify against the packing list. Inspect for any shipping damage. Report any discrepancies or damage to Genmitsu support immediately.
3.2 Basic Assembly Steps
Assembly typically involves attaching the gantry to the base, installing the spindle, and connecting the wiring. The upgraded design minimizes complex steps.
3.3 Electrical Connections
Connect the stepper motors, limit switches, and spindle to the control board. Ensure all connections are secure before powering on the machine.
4. Operating Instructions
The 3018-PROVer V2 operates using the GRBL v1.1 firmware and can be controlled via its offline controller or a connected computer.
4.1 Offline Control
The included offline controller allows for direct control of the machine without a computer. It can load G-code files from an SD card, jog the axes, set home positions, and start/pause/stop jobs.
4.2 Software Control (GRBL)
For advanced control and design, connect the machine to a computer running compatible GRBL control software (e.g., Candle, UGS). This allows for real-time monitoring, G-code sending, and more complex operations.
4.3 Spindle Operation
The spindle speed can be adjusted manually or via G-code commands. Ensure the correct collet and bit are installed and tightened before operation.
4.4 Using Extended Ports
- Laser Port: Connect a compatible laser module for engraving and cutting applications.
- Air Assistance Pump Port: Connect an air pump for improved chip evacuation during milling.
- MPG Port: Connect a Manual Pulse Generator for precise manual control of axis movement.
4.5 Firmware Updates
The 3018-PROVer V2 supports firmware updates via an SD card, allowing for future enhancements and bug fixes. Refer to the Genmitsu website for the latest firmware and update instructions.
5. Spoilboard and Extension
The machine comes with a robust aluminum spoilboard and is compatible with a 3040 extension for larger projects.
5.1 Original Aluminum Spoilboard
The one-piece machined and molded aluminum spoilboard provides a flat and stable work surface. It is designed with a grid of threaded holes for easy clamping of workpieces.
5.2 3040 Extension Compatibility
The 3018-PROVer V2 is designed to work seamlessly with the 3018PROVer-V2 Y-Axis Extension Kit, allowing you to expand your work area from 3018 to 3040. This extension uses a new 4mm sheet metal connector design to attach the aluminum spoilboard to the polishing bar, ensuring the Y-axis travel area remains constant.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Genmitsu 3018-PROVer V2.
- Cleaning: Regularly clean dust and debris from the lead screws, linear rails, and gantry using a brush or compressed air. Avoid using solvents that may damage plastic components.
- Lubrication: Apply a thin layer of light machine oil or grease to the lead screws and linear rails periodically to ensure smooth movement.
- Tighten Fasteners: Periodically check and tighten all screws and bolts to ensure structural integrity.
- Spindle Care: Keep the spindle clean and free of dust. If the spindle motor becomes excessively hot or noisy, discontinue use and contact support.
- Collet Maintenance: Clean collets regularly to ensure proper grip on bits. Replace worn collets to prevent bit slippage.
7. Troubleshooting
This section provides solutions to common issues you might encounter.
7.1 Machine Not Powering On
- Check power cable connection to the machine and wall outlet.
- Ensure the power switch on the control board is in the 'ON' position.
- Verify the power adapter is functioning correctly.
7.2 Motors Not Moving / Skipping Steps
- Check all motor cable connections to the control board.
- Ensure lead screws and linear rails are clean and lubricated.
- Verify that the current settings for the stepper drivers are appropriate (if adjustable).
- Check for any physical obstructions preventing movement.
7.3 Spindle Not Rotating
- Check spindle motor connection to the control board.
- Ensure the spindle is enabled in your control software or offline controller.
- Verify power supply voltage is sufficient for the spindle.
7.4 G-code Errors
- Ensure your G-code is compatible with GRBL v1.1.
- Check for syntax errors in the G-code file.
- Verify that the machine's work area and limits are correctly set.
For further troubleshooting or issues not listed here, please contact Genmitsu customer support.
8. Specifications
Detailed specifications for the Genmitsu 3018-PROVer V2 CNC Router Machine:
| Attribute | Value |
|---|---|
| Brand | Genmitsu |
| Model | 3018-PROVer V2 |
| Material | Aluminum |
| Power Source | Corded Electric |
| Base Type | Fixed |
| Control System | GRBL v1.1 |
| Driver Chips | Toshiba TB6S109 (32-bit) |
| Extension Compatibility | 3018PROVer-V2 Y-Axis Extension Kit (for 3040 work area) |
| ASIN | B0CTCB2Z6D |
| First Available | January 26, 2024 |
9. Warranty and Support
For warranty information, technical support, or assistance with your Genmitsu 3018-PROVer V2 CNC Router Machine, please refer to the official Genmitsu website or contact their customer service directly. Keep your purchase receipt for warranty claims.
Genmitsu Official Website: Visit the Genmitsu Store on Amazon
