Product Overview
This manual provides instructions for the assembly, use, and maintenance of your EMOOR Durable Slatted Bed and Tri-Fold Mattress Set. This set is designed for single occupancy, offering a sturdy bed frame with adjustable height and a comfortable, high-resilience tri-fold mattress.
The bed frame features a slatted design for enhanced breathability, helping to prevent mold and dust mites. The mattress is made from high-density urethane for durability and optimal pressure distribution.
Setup Instructions
1. Unpacking
- Carefully open the packaging and remove all components.
- Verify that all parts listed in the packing list are present.
- Keep packaging materials for potential future transport or returns.
2. Assembly of the Slatted Bed Frame
Estimated Assembly Time: Approximately 30-60 minutes for two adults.
Recommended Tools: Gloves and a protective mat are recommended for easier assembly and to prevent scratches.
- Identify all frame components: headboard, side rails, footboard, legs, and slatted base pieces.
- Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure.
- Insert the slatted base pieces into the frame. The slatted base is designed for high breathability.
- Attach the legs to the bed frame. The bed height is adjustable in 4 stages by connecting or separating the leg parts.
- Ensure all screws and fasteners are tightened securely before use.
Image: Detailed diagram illustrating the dimensions of the EMOOR single slatted bed frame and its 4-stage adjustable height feature. It shows the overall length, width, and height, along with specific measurements for the headboard, slatted base, and legs. The load capacity of 350kg is also indicated.
Image: Close-up view demonstrating how the adjustable legs are attached to the bed frame. This image highlights the modular design of the legs, allowing for different bed heights.
Important Note: We recommend that two or more adults assemble this product. When moving the assembled bed, always lift it by the long sides with two or more adults to prevent damage or injury.
3. Mattress Placement
- Unfold the EMOOR START Tri-Fold Mattress completely.
- Place the mattress evenly on the assembled bed frame.
Operating Instructions
Adjusting Bed Height
The bed frame offers 4 height adjustment options. To change the height:
- Remove the mattress from the bed frame.
- Carefully lift the bed frame with at least two adults.
- Adjust the leg components by connecting or separating them to achieve the desired height (High, Low, Floor, etc.).
- Ensure all leg connections are stable before placing the mattress back on the frame.
Image: Visual representation of the four adjustable height settings for the bed frame, ranging from a high setting (approx. 32cm) to a floor setting (approx. 9cm), achieved by modifying the leg components.
Using the Tri-Fold Mattress
- The mattress can be used fully extended on the bed frame.
- When not in use or for storage, the mattress can be folded into three sections for a compact size.
- The high-resilience urethane core provides excellent body support and pressure distribution for comfortable sleep.
Image: A visual demonstrating the EMOOR START tri-fold mattress, showing its dimensions when fully extended and when folded into three sections for compact storage.
Maintenance
Bed Frame Care
- Wipe the wooden frame with a dry cloth to remove dust and dirt.
- Avoid using harsh chemicals or abrasive cleaners, as they may damage the lacquer finish.
- Periodically check all screws and fasteners and tighten them if necessary to maintain stability.
- Ensure good ventilation around the bed to maximize the breathability benefits of the slatted base and prevent moisture buildup.
Mattress Care
- The cover fabric of the EMOOR START Tri-Fold Mattress is removable and machine washable.
- When washing, it is recommended to use a laundry net to protect the fabric.
- Do not wash the urethane core. Spot clean only if necessary.
- Allow the mattress to air out regularly to maintain freshness and prevent moisture accumulation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame creaks or feels unstable. | Loose screws or fasteners. | Check all assembly points and tighten any loose screws or bolts. Ensure legs are securely attached. |
| Difficulty adjusting bed height. | Leg components not properly aligned or connected. | Ensure the bed is lifted by two adults. Re-align and securely connect or separate the leg parts as instructed. |
| Mattress feels uneven or uncomfortable. | Mattress not fully unfolded or improperly placed. | Ensure the mattress is fully unfolded and positioned evenly on the bed frame. Allow some time for the urethane to fully expand after unpacking. |
| Mold or mildew on slatted base. | Insufficient ventilation or high humidity. | Ensure adequate airflow around and under the bed. Regularly air out the room and consider using a dehumidifier in humid environments. Clean any affected areas with a mild anti-mold solution and dry thoroughly. |
Specifications
Durable Slatted Bed Frame
- Size: Single (Approx. W97 x D207 x H46.5-69.5 cm)
- Bed Surface Height: Approx. H9-32 cm (4-stage adjustable)
- Materials:
- Frame, Headboard, Legs: Natural Pine Wood (Lacquer finish)
- Slats: Natural Paulownia Wood
- Product Weight: Approx. 26 kg
- Load Capacity: Approx. 350 kg
- Country of Manufacture: China
EMOOR START Tri-Fold Mattress
- Size: Single (Approx. W97 x D195 x Thickness 8 cm)
- Folded Dimensions: Approx. W97 x D66 x Thickness 30 cm
- Composition:
- Cover Fabric (Top/Sides): 100% Polyester (Knit fabric)
- Cover Fabric (Bottom): 100% Polyester (Double Russell mesh)
- Core Material: High-resilience Urethane (25D/180N)
- Country of Manufacture: China
Warranty Information
Specific warranty details for this product are typically provided at the point of purchase or within separate documentation included with your product. Please refer to your purchase receipt or contact the retailer for detailed warranty terms and conditions.
Generally, EMOOR products are manufactured to high standards. Any defects in materials or workmanship under normal use are usually covered for a limited period. This warranty typically does not cover damage resulting from improper assembly, misuse, accidents, or normal wear and tear.
Customer Support
For further assistance, questions, or to report any issues with your EMOOR Durable Slatted Bed & Tri-Fold Mattress Set, please contact EMOOR customer support.
- Online Support: Visit the official EMOOR website for FAQs and contact forms.
- Retailer Support: If purchased from a specific retailer, their customer service department may also be able to assist you.
- Manufacturer Contact: For direct inquiries, please refer to the contact information provided on the product packaging or the EMOOR brand store page on Amazon.
When contacting support, please have your product model number (zd-b-005set-s-st) and purchase details readily available.