1. Introduction
About Your Benro KH25PC Video Tripod Kit
The Benro KH25PC Video Tripod Kit is engineered to provide stable and precise support for videographers using DSLR, mirrorless, and compact camcorders. Its robust aluminum construction and fluid head are designed for smooth camera movements, making it suitable for various video production needs.
Image: The Benro KH25PC Video Tripod Kit in its fully extended position, showcasing the twin-leg design, fluid head, and pan handle.
2. Product Components
Your Benro KH25PC Video Tripod Kit includes the following essential components:
- Professional Aluminum Twin-Leg Tripod
- Fluid Head
- Pan Handle
- Mid-Level Spreader
- Quick-Release Plate
- Padded Carrying Case
Image: The Benro KH25PC Video Tripod Kit in its compact, folded state, ready for transport or storage.
3. Setup Instructions
Unpacking and Initial Setup
- Remove from Carrying Case: Carefully remove the tripod kit from its padded carrying case.
- Extend Legs: Release the leg locks and extend the twin-tube aluminum legs to the desired height. Ensure all leg locks are securely fastened.
- Adjust Mid-Level Spreader: Position the mid-level spreader to stabilize the tripod legs.
- Attach Fluid Head: Ensure the fluid head is securely mounted to the tripod base.
- Attach Quick-Release Plate to Camera: Secure the quick-release plate to the base of your camera using the appropriate screw.
- Mount Camera: Slide the camera with the attached quick-release plate onto the fluid head until it locks into place. Verify it is secure.
- Attach Pan Handle: Insert the pan handle into its designated slot on the fluid head and tighten the locking mechanism.
Image: The Benro KH25PC tripod fully extended with a camera attached, demonstrating its readiness for use.
Image: A close-up view of the leg lock mechanism on the tripod, highlighting its secure design.
Video: Benro KH Video Tripods Overview
Video: An official Benro video providing an overview of the KH series video tripods, including setup and key features.
4. Operating Instructions
Adjusting Height and Stability
- Leg Height Adjustment: Use the flip-lock design on each leg section to extend or retract the legs. Ensure each section is locked firmly before use.
- Mid-Level Spreader: The mid-level spreader enhances stability. Adjust its position to achieve the desired leg angle and footprint.
- Rubber Feet: The tripod features rubber feet for enhanced grip on various indoor and outdoor surfaces.
Fluid Head Operation
- Pan and Tilt Control: The fluid head offers smooth pan and tilt movements. Use the pan handle to guide your camera.
- Drag Adjustment: The fluid head features fixed pan/tilt drag for consistent, controlled motion.
- Counterbalance System: A pre-set counterbalance system assists in balancing your camera, preventing accidental forward or backward tilts.
- Leveling: Utilize the integrated bubble level on the fluid head to ensure your camera is perfectly level.
Image: A detailed view of the fluid head, showing the pan handle attachment and control knobs for smooth camera operation.
Image: A close-up of the quick-release plate mechanism on the fluid head, illustrating how a camera is securely mounted.
Video: Super Smooth Pan & Tilt Demonstration
Video: A demonstration of the fluid head's smooth pan and tilt capabilities, highlighting its performance for video recording.
5. Maintenance
- Cleaning: Wipe down the tripod with a soft, dry cloth after each use. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly.
- Lubrication: Periodically check moving parts for smooth operation. Do not over-lubricate; consult Benro support if lubrication is required.
- Storage: Store the tripod in its padded carrying case in a cool, dry place away from extreme temperatures and humidity.
- Inspection: Regularly inspect all screws, levers, and locks for tightness and wear. Tighten any loose components.
6. Troubleshooting
Common Issues and Solutions
- Unstable Tripod:
Solution: Ensure all leg locks are fully engaged and the mid-level spreader is properly extended. Check that the fluid head is securely attached to the tripod base. - Jerky Pan/Tilt Movements:
Solution: Verify that the camera is correctly balanced on the fluid head. Ensure all locking mechanisms for pan and tilt are sufficiently loosened for movement, but not completely disengaged if drag is desired. - Camera Not Securing to Fluid Head:
Solution: Confirm the quick-release plate is correctly attached to your camera and fully inserted into the fluid head's receiver. Ensure the locking lever on the fluid head is engaged.
For issues not listed here, please contact Benro customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model | KH25PC |
| Brand | Benro |
| Material | Aluminum |
| Item Weight | 7.75 pounds |
| Weight Limit | 11 lb |
| Maximum Height | 61.61 Inches |
| Product Dimensions | 6.69 x 6.69 x 61.61 inches |
| Tripod Head Type | Pan Heads |
8. Warranty and Support
Warranty Information
A standard limited warranty of 3 years is provided from the date of purchase for the original owner. If the product is registered online, the warranty is extended by an additional 2 years, totaling 5 years, in applicable regions.
Customer Support
For further assistance, technical support, or warranty claims, please visit the official Benro website or contact their customer service department.