Unikito Reversible L-Shaped Computer Desk Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Unikito Reversible L-Shaped Computer Desk. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product.

Image 1.1: The Unikito L-Shaped Computer Desk, showcasing its features including the monitor stand, integrated power outlets, and RGB LED lighting.

2. Safety Information

• Always assemble the desk according to the provided instructions to ensure stability and safety.
• Use the adjustable non-slip foot pads to protect your floor and maintain stability on uneven surfaces.
• Do not exceed the maximum weight limit of 500 lbs (226 kg) on the desk surface.
• Keep liquids away from the integrated power outlets to prevent electrical hazards.
• Ensure all connections for the RGB LED light and power outlets are secure before use.

3. Package Contents

Verify that all components are present before beginning assembly:

• 1 x Corner Desk (multiple panels)
• 1 x Instruction Manual (this document)
• 1 x Monitor Stand
• 1 x Power Socket (integrated charging station)
• 1 x RGB LED Light Strip
• All necessary hardware (screws, bolts, tools if included)

4. Setup and Assembly

The Unikito L-Shaped Computer Desk is designed for straightforward assembly. Follow the step-by-step instructions provided in the separate assembly guide included in your package. Ensure you have adequate space for assembly.

4.1 Reversible Design

This desk features a reversible design, allowing it to be configured in three ways: L-shape (left or right orientation) or as a straight long desk. Decide on your preferred configuration before starting assembly.

Image 4.1: Visual representation of the reversible L-shape and linear configurations of the desk.

4.2 Dimensions

Refer to the dimension diagram for precise measurements to ensure the desk fits your intended space.

Image 4.2: Detailed dimensions for both L-shaped and linear desk setups.

4.3 Adjustable Feet

Once assembled, adjust the non-slip foot pads at the base of the desk legs to ensure stability on uneven floors. Rotate them clockwise or counter-clockwise until the desk is level and stable.

Image 4.3: Illustration of the adjustable foot pads for leveling the desk.

5. Operating Instructions

5.1 Integrated Power Outlets and USB Ports

The desk includes an integrated power strip with 3 AC outlets (125V/12A) and 2 USB charging ports (5V/2A). Connect the desk's power cord (6.5ft) to a wall outlet. You can then power your devices directly from the desk.

Image 5.1: Detail of the integrated power outlets and USB charging ports.

5.2 RGB LED Light

The desk features an RGB LED light strip with 60,000 colors and multiple dynamic modes. Use the included remote control to customize the lighting effects. The light also supports a music sync function, allowing it to react to audio.

Image 5.2: The desk illuminated by the RGB LED strip lights.

5.3 Monitor Stand

The flexible monitor stand elevates your display to an ergonomic height, helping to reduce neck strain and improve posture. It also creates additional storage space underneath for keyboards, mice, or other small items.

Image 5.3: The monitor stand providing elevated display and under-storage.

5.4 Storage Shelves

The desk incorporates under-desk storage shelves, including an adjustable shelf. These shelves provide ample space for books, magazines, office essentials, and computer towers. Adjust the shelf height as needed to accommodate larger items.

Image 5.4: Under-desk storage shelves and the adjustable shelf feature.

6. Maintenance

• Cleaning: Wipe the desk surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the laminated finish.
• Hardware: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Power Outlets: Keep the power outlets clean and free of dust. Do not attempt to disassemble the power strip.
• LED Lights: If the LED lights malfunction, check the connections. Do not attempt to repair the LED strip yourself.

7. Troubleshooting

• Desk is wobbly: Ensure all assembly hardware is securely tightened. Adjust the non-slip foot pads on each leg to level the desk on uneven surfaces.
• Parts do not align during assembly: Double-check the assembly instructions and diagrams to ensure all pieces are oriented correctly. If a part appears to be manufactured incorrectly, contact customer support.
• Power outlets not working: Verify that the desk's main power cord is securely plugged into a functional wall outlet. Check if the wall outlet itself is receiving power.
• RGB LED lights not working or unresponsive: Ensure the LED strip is properly connected to its power source. Check the remote control's battery. If using multiple desks with RGB lights, note that remote controls may operate all nearby units simultaneously.

8. Specifications

9. Warranty and Support

This product comes with a Limited Warranty. For specific details regarding warranty coverage and duration, please refer to the warranty information provided with your purchase or contact Unikito customer support.

For any questions, missing parts, or assistance with assembly or operation, please contact Unikito customer support through the retailer's platform or the official Unikito website.