NEEWER VL67C RGB Selfie Light Instruction Manual

Introduction

Thank you for purchasing the NEEWER VL67C RGB Selfie Light. This portable and versatile LED light is designed to enhance your photography and videography with customizable lighting options and smart app control. Please read this manual carefully to ensure proper usage and optimal performance.

Package Contents

Verify that all items listed below are included in your package:

• 1 x Portable Fill Light
• 1 x Back Clip
• 1 x Front Clip
• 1 x Cold Shoe Mount
• 1 x Charging Cable (Type-C)

Setup

Charging the Device

Before first use, fully charge the NEEWER VL67C RGB Selfie Light. Connect the provided Type-C charging cable to the light's charging port and a 5V/2A power adapter (not included). The battery supports up to 110 minutes of continuous lighting at 100% brightness and charges fully in approximately 100 minutes. The light can be used while charging.

Attaching the Light

The VL67C light offers versatile attachment options for various devices:

1. Using the Front Clip:

   The front clip is suitable for phones, tablets, or laptops with a thickness of up to 0.98 inches (2.5cm). It features a dedicated lens hole to avoid obstructing the front camera. To install, push the clip onto the device. To remove, press the release button. The light can be tilted 160° for optimal positioning.

   

2. Using the Back Clip with Cold Shoe Mount:

   The back clip is designed for smartphones with a stretch range of 2-3.3 inches (5.2-8.5cm). Align and snap the back clip to the fill light. The back clip also features 1/4" threads, allowing you to attach the light to cameras, tripods, or other accessories using the included cold shoe mount.

   

Operating Instructions

Power On/Off and Basic Controls

Locate the power button on the side of the light. Press and hold to power on or off. Use the physical buttons and OLED display to navigate through modes and adjust settings directly on the device.

Smart App Control (NEEWER APP)

The NEEWER VL67C can be controlled wirelessly via the NEEWER APP, available for both iPhone and Android devices. This allows for advanced control over single or multiple lights.

1. Download the "NEEWER" app from your device's app store.
2. Ensure Bluetooth is enabled on your smartphone.
3. Open the NEEWER app and follow the on-screen instructions to connect to your VL67C light.

Through the app, you can access various smart functions:

• RGB Mode: Access 36,000 color choices for creative lighting.
• Music Sync: Synchronize light effects with music.
• Light Source Library: Select from a library of light sources.
• Color Matching: Match colors from an image or scene.
• Preset Color Temperature: Quickly select common color temperatures.
• Color Picker: Precisely select desired colors.
• Parameter Memory: Save and recall your preferred lighting setups.

Lighting Modes

The VL67C offers several lighting modes for diverse applications:

• CCT Mode: Adjust color temperature from 2500K (warm) to 8500K (cool). A built-in GM adjustment allows for color calibration.
• HSI Mode: Fine-tune 360° hue, 0-100% brightness, and 0-100 saturation for precise color control.
• FX Mode (Scene Effects): Choose from 17 pre-programmed scene effects, including:
  • Cop/Police Car
  • Ambulance
  • Fireworks
  • Lightning
  • Paparazzi
  • Defective Bulb
  • Explosion
  • Welding
  • CCT Flash
  • CCT Loop
  • INT Loop
  • TV Screen
  • Hue Flash
  • Hue Pulse
  • Color Pulse
  • Candlelight
  • Party

Maintenance

To ensure the longevity and optimal performance of your NEEWER VL67C RGB Selfie Light, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe the surface of the light. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
• Storage: When not in use, store the light in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: For extended storage, charge the battery to approximately 50% every three months to prevent deep discharge and prolong battery life.
• Avoid Impact: Protect the device from drops and impacts, which can damage internal components or the LED panel.

Troubleshooting

If you encounter issues with your NEEWER VL67C RGB Selfie Light, refer to the following common troubleshooting steps:

• Light Not Turning On:
  • Ensure the battery is charged. Connect the light to a power source using the Type-C cable.
  • Press and hold the power button for a few seconds to ensure it's not just a short press.
• App Connectivity Issues:
  • Make sure Bluetooth is enabled on your smartphone.
  • Ensure the light is powered on and within range of your smartphone.
  • Restart the NEEWER app and try reconnecting.
  • If issues persist, try restarting both the light and your smartphone.
• Inconsistent Light Output or Flickering:
  • Check the battery level; low battery can affect performance.
  • Ensure the light is not exposed to extreme temperatures.
• Buttons Not Responding:
  • Try turning the light off and on again.
  • If the issue persists, contact customer support.

Specifications

Warranty and Support

NEEWER products typically come with a standard manufacturer's warranty. For specific warranty details, registration, or to access customer support, please visit the official NEEWER website or contact their customer service directly. Extended protection plans may also be available for purchase.

Official NEEWER Website: www.neewer.com

Safety Information

Please observe the following safety precautions:

• Do not disassemble or modify the device.
• Keep away from water and high humidity environments.
• Do not expose to extreme heat or open flames.
• Keep out of reach of children.
• Use only the specified charging cable and power adapter.