1. Introduction
This manual provides detailed instructions for the safe and effective use of your DEPSTECH DS560TL Triple Lens Borescope. This device is designed for visual inspection in hard-to-reach areas, featuring a 5-inch IPS display, 1080P HD resolution, and a 16.5ft semi-rigid cable with IP67 waterproof rating. Please read this manual thoroughly before operation.
2. Product Overview
2.1 What's in the Box
- Video Borescope Unit
- 16.5ft Semi-Rigid Cable
- Sturdy Carrying Case
- Accessory Kit (Kickstand, USB Charging Cable, Hook and Magnet)
- User Manual
Figure 1: Included components of the DEPSTECH DS560TL borescope kit, showing the main unit, probe cable, carrying case, and accessories.
2.2 Key Features
- Triple Lens Camera System: Features three 1080P HD cameras for comprehensive viewing, allowing seamless toggling between front and side views, or simultaneous dual-view display.
- 5-inch IPS Display: Provides a clear and detailed view of inspection areas with high resolution.
- Bluart 3.0 Technology: Enhances image clarity, color accuracy, and low-light performance with adjustable camera lights.
- 16.5ft Semi-Rigid Cable: Offers a balance of flexibility and stiffness for navigating tight spaces and maintaining probe position.
- IP67 Waterproof Probe: Ensures safe operation in wet environments, suitable for plumbing and sewer inspections.
- Audio and Video Recording: Capture full HD video and audio, supported by an included 32GB TF card for documentation.
- Ergonomic Design: Features an ergonomic grip and detachable kickstand for comfortable and stable use.
Figure 2: The DEPSTECH DS560TL borescope main unit with its flexible probe cable attached, ready for inspection.
Figure 3: An illustration detailing the internal components of the triple lens camera system, highlighting the Bluart 3.0 technology for enhanced clarity.
Figure 4: The borescope display showing the dual-view feature, allowing simultaneous viewing from two different camera lenses.
3. Setup
3.1 Charging the Device
- Connect the provided USB charging cable to the borescope unit's charging port.
- Plug the other end of the USB cable into a standard 5V/1A USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate during charging and turn off when fully charged. A full charge typically takes approximately 3-4 hours.
Figure 5: The borescope unit being charged via a USB cable connected to a power outlet.
3.2 Inserting the TF Card
The device comes with a 32GB TF card pre-installed. If you need to replace it or ensure it's properly seated:
- Locate the TF card slot on the side of the borescope unit.
- Gently push the TF card into the slot until it clicks into place. To remove, push it again until it springs out.
Figure 6: A close-up view of the TF card slot on the borescope unit, illustrating how to insert the memory card.
3.3 Attaching the Probe Cable
Ensure the probe cable connector is aligned correctly with the port on the main unit and push firmly until it is securely connected.
3.4 Attaching Accessories
The accessory kit includes a hook and a magnet. These can be screwed onto the tip of the camera probe for retrieving small objects or navigating in specific situations.
Figure 7: The included hook and magnet accessories, designed to attach to the end of the borescope probe for various tasks.
4. Operating Instructions
4.1 Powering On/Off
- To power on, press and hold the Power button until the screen illuminates.
- To power off, press and hold the Power button until the screen turns off.
4.2 Navigating the Interface
Use the directional buttons (Up, Down, Left, Right) to navigate through menus and settings. Press the OK button to confirm selections.
4.3 Switching Camera Views
The DS560TL features three lenses: a front camera and two side cameras. You can switch between these views or activate a dual-view display.
- Press the camera switch button (often labeled with a camera icon or arrows) to cycle through front, side 1, side 2, and dual-view modes.
- In dual-view mode, you can typically see the front camera view alongside one of the side camera views.
Figure 8: The borescope screen displaying the options for switching between the front and side cameras, or activating a split-screen view.
4.4 Adjusting LED Brightness
The camera probe is equipped with adjustable LED lights to illuminate dark inspection areas.
- Use the dedicated light adjustment buttons (often labeled with a sun icon or +/-) to increase or decrease the brightness of the LEDs.
- There are typically multiple brightness levels to suit different environments.
Figure 9: The borescope probe tip showing the integrated LED lights and an illustration of their adjustable brightness levels.
4.5 Capturing Photos and Videos
- To take a photo, press the Photo button (usually marked with a camera icon).
- To start video recording, press the Record button (usually marked with a video camera icon). Press it again to stop recording.
- All captured media is saved to the inserted TF card.
4.6 Reviewing Media
- Enter playback mode by pressing the Menu or Playback button.
- Use the directional buttons to browse through photos and videos.
- Press OK to view a selected item or play a video.
4.7 Image Rotation
The image on the display can be rotated 180 degrees for optimal viewing, especially when the probe is in an inverted position.
- Press the Rotate button (often indicated by a circular arrow icon) to flip the image 180 degrees.
Figure 10: The borescope screen demonstrating the 180-degree image rotation feature, useful for correcting inverted views during inspection.
5. Maintenance
5.1 Cleaning the Probe and Lenses
- After each use, especially in dirty or wet environments, gently wipe the camera probe and lenses with a soft, damp cloth.
- For stubborn dirt, use a small amount of mild soap solution. Ensure no liquid enters the main unit.
- Do not use abrasive cleaners or solvents, as these can damage the lens and probe material.
5.2 Device Storage
- Store the borescope unit and probe in the provided sturdy carrying case when not in use.
- Keep the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ensure the probe cable is coiled loosely to prevent damage or kinking.
5.3 Battery Care
- To prolong battery life, avoid fully discharging the battery frequently.
- If storing the device for an extended period, charge it to approximately 50% every few months.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery; Loose cable connection. | Charge the device fully; Ensure the probe cable is securely connected. |
| Image is blurry or unclear. | Dirty lens; Insufficient lighting; Object too close/far. | Clean the camera lens; Adjust LED brightness; Maintain optimal focal distance (approx. 3-10 cm). |
| Cannot record photos/videos. | TF card full or not inserted; TF card error. | Check TF card insertion; Delete old files or replace TF card; Format TF card (backup data first). |
| Screen glitches or freezes. | Temporary software issue; Loose cable connection. | Restart the device; Disconnect and reconnect the probe cable; Update firmware if available. |
| Difficulty navigating tight corners. | Cable rigidity limitations. | The semi-rigid cable has inherent limitations. For very complex paths, a "fish tape" or similar guide may be required. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | DS560TL |
| Display | 5-inch IPS Screen |
| Camera Resolution | 1080P HD (2.0MP image sensors) |
| Number of Lenses | Triple Lens (Front + 2 Side) |
| Cable Length | 16.5ft (5 meters) |
| Cable Type | Semi-Rigid |
| Water Resistance | IP67 (Probe) |
| Storage | Micro SD Card (32GB included) |
| Battery Type | Lithium Ion (1 required, included) |
| Video Capture Resolution | 1080p |
| Macro Focus Range | Up to 10 cm |
| Color | Dark Grey |
| Manufacturer | DEPSTECH |
8. Warranty and Support
DEPSTECH products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official DEPSTECH website for detailed warranty terms and conditions.
For technical support, troubleshooting assistance, or inquiries regarding your DEPSTECH DS560TL borescope, please contact DEPSTECH customer service through their official website or the contact information provided in your product packaging.
You can also visit the DEPSTECH Store on Amazon for more product information and support resources.
