Important Safety Information
Please read and understand all instructions before beginning assembly and use. Keep this manual for future reference. Failure to follow these instructions may result in serious injury.
- Weight Capacity: The upper bed has a maximum weight capacity of 400 LBS. The bottom bed has a maximum weight capacity of 600 LBS. Do not exceed these limits.
- Recommended Age: This bunk bed is recommended for users aged 6 years and older.
- Guardrails: The upper bunk is equipped with guardrails. Ensure they are always properly installed and secured to prevent falls.
- Mattress Thickness: Use a mattress with a maximum thickness of 6 inches for both upper and lower bunks to ensure proper guardrail height and safety.
- Assembly: Assembly requires two people and approximately 2 hours. Ensure all parts are present and undamaged before assembly. Do not use power tools for assembly unless specifically instructed, as overtightening can damage components.
- Regular Checks: Periodically check all connections and fasteners to ensure they remain tight and secure. Retighten as necessary.
- Ventilation: The slatted design provides proper airflow for mattresses. Do not obstruct the slats.
Product Overview
The RORIGAT Twin-Twin over Full L-Shaped Bunk Bed is designed to maximize space and functionality in a bedroom. It features two twin beds on the upper level, a full-size bed on the lower level, integrated storage drawers, a staircase with shelves, a wardrobe, and a retractable desk.
Key Features:
- L-shaped configuration for efficient space utilization.
- Staircase with built-in storage shelves and drawers.
- Integrated wardrobe with a clothes pole.
- Retractable desk for flexible workspace.
- Sturdy wooden frame with slats for mattress support.
Dimensions:
Refer to the diagram below for detailed product dimensions.

Image: Detailed dimensions of the RORIGAT L-Shaped Bunk Bed. This diagram shows the overall length (118.3 inches), width (94.1 inches), and height (62.2 inches), along with specific measurements for each component like the beds, staircase, drawers, and wardrobe.

Image: Front view of the RORIGAT L-Shaped Bunk Bed. This image displays the complete L-shaped bunk bed assembly, including the upper twin beds, lower full bed, staircase with storage, and the wardrobe unit.
Setup and Assembly Instructions
This bunk bed requires assembly. Please ensure you have sufficient space and assistance before beginning. All necessary tools are included, but a screwdriver may also be helpful.
- Unpack and Identify Parts: Carefully unpack all components and lay them out. Compare them against the parts list provided in your packaging to ensure all pieces are present and undamaged.
- Assemble Bed Frames: Begin by assembling the individual bed frames (two twin, one full) according to the detailed diagrams in your included assembly guide. Ensure all bolts are finger-tight at this stage.
- Install Slats: Once the bed frames are partially assembled, install the wooden slats into each frame. These slats provide mattress support and ventilation.

Image: Close-up view of the wooden bed slats. This image shows the sturdy wooden slats designed to support the mattress and allow for proper air circulation.
- Assemble Staircase Unit: Construct the staircase unit, paying close attention to the integration of the storage shelves and drawers.

Image: Staircase unit with integrated storage. This image highlights the steps of the staircase, each featuring a built-in shelf or drawer for convenient storage.
- Assemble Wardrobe Unit: Assemble the wardrobe unit, including the internal clothes pole and shelves.

Image: Interior view of the wardrobe. This image shows the internal structure of the wardrobe, including the clothes hanging pole and a small shelf.
- Connect Components: Carefully connect the assembled bed frames, staircase, and wardrobe unit to form the L-shaped configuration. Ensure all connecting hardware is used as specified.
- Install Guardrails: Attach the guardrails to the upper bunk. Verify they are securely fastened.
- Final Tightening: Once all components are in place and aligned, systematically tighten all bolts and screws using the provided tools. Do not overtighten.
- Insert Drawers: Slide the storage drawers into their designated slots in the staircase and under the full bed.
- Safety Check: Before use, perform a thorough safety check. Ensure all connections are tight, the bed is stable, and guardrails are secure.

Image: Assembled bunk bed with open wardrobe and drawers. This image provides a view of the fully assembled bunk bed, showcasing the open wardrobe doors and the pull-out storage drawers.
Operating Instructions
Using the Retractable Desk:
The bunk bed includes a retractable desk for flexible use. To use the desk, gently pull it out from its stored position. To store it, push it back into the unit until it is flush with the frame. Ensure the area around the desk is clear before extending or retracting.
Utilizing Storage:
- Staircase Drawers/Shelves: Use the drawers and open shelves within the staircase for storing books, toys, or clothing. Ensure items are placed securely to prevent them from falling.
- Wardrobe: The integrated wardrobe provides hanging space for clothes using the internal pole. The small shelf at the head of the bed is suitable for small personal items.
- Under-Bed Drawers: The drawers located under the full bed can be used for additional storage of bedding or other items.
Maintenance
Proper maintenance will extend the life of your RORIGAT bunk bed.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- Fastener Checks: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and connections. Tighten any that have become loose. Loose fasteners can compromise the structural integrity and safety of the bed.
- Wood Care: Protect the wood from excessive moisture and direct sunlight to prevent warping or fading.
- Mattress Rotation: Rotate mattresses regularly according to mattress manufacturer guidelines to ensure even wear and prolong their lifespan.
Troubleshooting
If you encounter issues with your bunk bed, refer to the following common solutions:
- Squeaking Noises:
Cause: Loose fasteners or friction between wood components.
Solution: Inspect all bolts and screws and tighten them securely. If squeaking persists, apply a small amount of paraffin wax or silicone spray to contact points between wooden parts (e.g., where slats rest on side rails).
- Instability/Wobbling:
Cause: Uneven assembly or loose connections.
Solution: Ensure the bed is on a level surface. Re-check all assembly connections and tighten any loose bolts. Verify that all components are correctly aligned as per the assembly instructions.
- Drawers Sticking:
Cause: Misalignment, debris in tracks, or humidity.
Solution: Check if the drawer is properly seated in its runners. Clear any dust or debris from the drawer tracks. If the issue is due to humidity, a dehumidifier in the room may help.
If problems persist, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Bunk Bed |
| Size | Twin-Twin over Full |
| Overall Product Dimensions | 118.3'' L x 94.1'' W x 62.2'' H |
| Overall Product Weight | 392.67 LBS |
| Upper Bed Weight Capacity | 400 LBS |
| Bottom Bed Weight Capacity | 600 LBS |
| Recommended Age | 6+ years |
| Recommended Mattress Thickness | 6 inches |
| Number of Slats (each bed) | 14 |
| Material | Plywood + MDF + Pinewood |
| Assembly Required | Yes |
| Estimated Assembly Time | 2 Hours |
| Suggested Number of People for Assembly | 2 |
| Additional Tools Required | Screwdriver (All other tools included) |
| Country of Origin | Vietnam |
| UPC | 712085575891 |
Note: Manual measurements may result in slight dimensional differences. Actual product colors may vary slightly due to lighting or display settings.
Warranty and Support
For any questions regarding assembly, missing parts, or product issues, please contact RORIGAT customer support. Please have your model number and purchase information ready when contacting support.
While specific warranty details are not provided in this manual, most products come with a manufacturer's warranty covering defects in materials and workmanship. Please refer to your purchase documentation or contact the retailer for specific warranty terms.
Contact Information: Refer to your purchase receipt or the retailer's website for the most up-to-date customer support contact details for RORIGAT products.