1. Introduction
This manual provides essential information for the safe and efficient use of your new Faber Hob Magiclift HT753 BR CI AI 75 cm 3 Burner. Please read these instructions carefully before installation, operation, or maintenance. Keep this manual for future reference.
Figure 1: Faber Hob Magiclift HT753 BR CI AI 75 cm 3 Burner, showcasing its sleek black glass surface and three brass burners.
2. Safety Information
WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Read the installation, operating, and maintenance instructions thoroughly before installing or servicing this equipment.
- Ensure proper ventilation in the kitchen area.
- Do not store flammable materials near the hob.
- Always use appropriate cookware for gas cooking.
- Keep children away from the appliance during operation.
- In case of a gas leak, immediately turn off the gas supply, open windows, and do not operate any electrical switches or appliances. Contact a qualified technician.
- This appliance is equipped with a Flame Failure Device (FFD) which automatically cuts off the gas supply if the flame extinguishes.
3. Product Overview
The Faber Hob Magiclift HT753 BR CI AI features a toughened 8mm matt finish black glass surface, three high-efficiency brass burners, and premium control knobs. Its unique liftable burner design enhances convenience for cleaning.
Key Features:
- Liftable Burners: For easy cleaning and maintenance.
- Auto Ignition: In-built battery-operated ignition for quick start-up.
- Flame Failure Device (FFD): Enhances safety by cutting off gas supply if the flame goes out.
- Cast Iron Pan Support: Durable and stable support for cookware.
- Premium Knobs: Ergonomic design for precise flame control.
- Toughened Black Glass: 8mm thick, matt finish for durability and aesthetics.
Components:
- Toughened Glass Surface
- Brass Burners (2 x 3.0 kW, 1 x 2.5 kW)
- Cast Iron Pan Supports
- Control Knobs
- Ignition System (underneath knobs)
- Flame Failure Devices (integrated into burners)
Figure 2: Illustration of the liftable burner mechanism, showing how the burner can be raised for access to the hob surface.
Figure 3: Close-up of a brass burner demonstrating its dual flame functionality, offering both a lower single flame (2.5 kW) and a full burner (3.0 kW) for cooking flexibility.
Figure 4: Detailed view of the Flame Failure Device (FFD) integrated into the burner, a safety feature that automatically cuts off gas supply.
Figure 5: Layout of the three brass burners, indicating the power distribution: two 3.0 kW burners and one 2.5 kW burner.
4. Setup & Installation
The Faber Hob Magiclift HT753 BR CI AI is designed for drop-in installation. Professional installation by a qualified technician is highly recommended to ensure safety and proper functioning.
Installation Steps:
- Prepare the Countertop: Ensure the countertop cutout dimensions match the hob's requirements. The hob dimensions are 38D x 75W x 13.5H Centimeters.
- Gas Connection: Connect the hob to a suitable gas supply line using approved fittings and flexible hoses. Ensure all connections are leak-free.
- Electrical Connection (for Ignition): Install the battery for the auto-ignition system as per the instructions provided in the packaging.
- Position the Hob: Carefully lower the hob into the countertop cutout, ensuring it sits flush and is securely supported.
- Test Operation: After installation, test all burners for proper ignition and flame stability. Check for any gas leaks.
Included Components: 1 Built-In Gas Stove, 1 Warranty Card, 1 User Manual.
5. Operating Instructions
Igniting a Burner:
- Place your cookware centrally on the cast iron pan support over the desired burner.
- Push down and turn the corresponding control knob counter-clockwise to the maximum flame position.
- The auto-ignition system will click, and the burner will ignite. Hold the knob down for a few seconds to allow the Flame Failure Device (FFD) to activate.
- Once the flame is stable, release the knob. If the flame extinguishes, repeat the process.
- Adjust the flame intensity by rotating the knob between the maximum and minimum flame settings.
Using Dual Functionality Burners:
The brass burners offer dual flame functionality. When igniting, the full burner ignites with 3.0 kW power. For a lower, more flexible flame (2.5 kW), adjust the knob to the appropriate setting as indicated by the knob markings.
Figure 6: Demonstrates the 'Lift & Lock' feature, allowing burners to be securely raised for convenient access during cooking or cleaning.
6. Maintenance & Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your hob.
General Cleaning:
- Always ensure the hob is cool and the gas supply is turned off before cleaning.
- Glass Surface: Use a soft cloth and a mild, non-abrasive cleaner specifically designed for glass surfaces. Avoid harsh chemicals or abrasive pads that can scratch the glass.
- Cast Iron Pan Supports: These can be removed and washed with warm soapy water. Dry thoroughly before placing them back on the hob.
- Burners: The liftable burners allow for easy access. Remove the burner caps and crowns. Clean them with warm soapy water and a soft brush. Ensure all burner parts are completely dry before reassembling. Clogged burner holes can affect flame quality.
Figure 7: The liftable burners simplify the cleaning process, allowing easy access to the hob's black glass surface.
7. Troubleshooting
If you encounter any issues, refer to the following common problems and solutions. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner does not ignite. | No gas supply, ignition electrode dirty, battery low/dead. | Check gas supply. Clean ignition electrode. Replace battery. |
| Flame is uneven or yellow. | Burner holes clogged, burner parts not correctly assembled. | Clean burner holes. Reassemble burner parts correctly. |
| Flame extinguishes after releasing knob. | Flame Failure Device (FFD) not activated, FFD faulty. | Hold knob down longer after ignition. Contact service if problem persists. |
| Gas smell detected. | Gas leak. | Immediately turn off gas supply, ventilate area, and contact emergency services/qualified technician. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Faber |
| Model Number | 106.0706.805 |
| Product Name | Hob Magiclift HT753 BR CI AI |
| Type | Built-In Gas Hob |
| Size | 75 cm Width |
| Heating Elements | 3 Burners |
| Burner Power | 2 x 3.0 kW, 1 x 2.5 kW |
| Burner Type | Brass, Liftable |
| Ignition Type | In-Built Auto Battery Operated |
| Safety Feature | Flame Failure Device (FFD) |
| Pan Support | Cast Iron |
| Control Type | Premium Knobs |
| Surface Material | 8mm Toughened Matt Finish Black Glass |
| Installation Type | Drop-In |
| Item Dimensions (D x W x H) | 38D x 75W x 13.5H Centimeters |
| Item Weight | 14900 Grams |
9. Warranty & Support
Warranty Information:
- Comprehensive Warranty: 2 Years
- Extended Warranty: 5 Years on Glass, Burners & Valves
Please retain your purchase receipt and warranty card for any warranty claims.
Customer Support:
For service, technical assistance, or warranty inquiries, please contact Faber customer support:
Toll-Free Number: 1800-209-3484
Manufacturer: Franke Faber India Pvt Ltd
Address: 1086/1/2, SANASWADI, TAL - SHIRUR, PUNE - 412208, MAHARASHTRA, INDIA
