Faber Hob Magiclift HT904 BR CI AI 90 cm 4 Burner User Manual

1. Important Safety Information

Please read all instructions carefully before using your new Faber Hob. Retain this manual for future reference. Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, or the gas supplier.

• Ensure proper ventilation when operating the hob.
• Do not store flammable materials near the appliance.
• Keep children away from the hob during operation.
• Always use appropriate cookware for the burner size.
• In case of a gas leak, immediately turn off the gas supply, open windows, and do not operate any electrical switches. Contact your gas supplier or a qualified technician.

Image: Flame Failure Device (FFD) for superior safety. This device automatically cuts off gas supply if the flame extinguishes.

2. Product Overview

The Faber Hob Magiclift HT904 BR CI AI is a 90 cm, 4-burner gas hob designed for modern kitchens. It features a toughened black glass surface, automatic ignition, and liftable brass burners for easy cleaning and enhanced safety.

Image: Faber Hob Magiclift HT904 BR CI AI, 90 cm, 4 Burner.

3. Setup and Installation

This hob is designed for drop-in installation. Professional installation by a qualified technician is highly recommended to ensure safety and proper functioning. Refer to the included installation template for precise cutout dimensions.

3.1 Included Components

• 1 Built-In Gas Stove
• 1 Warranty Card
• 1 User Manual (this document)

3.2 Dimensions

• Item Dimensions (D x W x H): 52.5D x 90W x 17H Centimeters

Image: Hob dimensions for installation. Width: 900 mm, Depth: 525 mm.

4. Operating Instructions

Your Faber hob features automatic ignition and liftable burners for efficient and convenient cooking.

4.1 Lighting a Burner

1. Ensure the gas supply to the hob is open.
2. Push down and turn the corresponding control knob counter-clockwise to the maximum flame position.
3. The automatic ignition system will spark, lighting the burner. Hold the knob for a few seconds after ignition to allow the Flame Failure Device (FFD) to activate.
4. Once lit, adjust the flame size by turning the knob between the maximum and minimum flame settings.
5. To turn off, turn the knob clockwise to the 'OFF' position.

4.2 Burner Functionality

The hob is equipped with 4 burners: two 3.0 kW burners and two 2.5 kW burners. Some burners offer dual functionality:

Image: Dual functionality in a single brass burner, offering both 2.5 kW and 3 kW power options.

4.3 Liftable Burners

The unique liftable burner design enhances convenience and safety. You can lift the burners for easier access to the hob surface for cleaning.

Image: Lift & Lock burners for enhanced convenience and safety.

5. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and optimal performance of your hob.

5.1 Cleaning the Glass Surface

• Allow the hob to cool completely before cleaning.
• Use a soft cloth or sponge with mild detergent and warm water.
• For stubborn stains, use a non-abrasive hob cleaner specifically designed for glass surfaces.
• Wipe dry with a clean, soft cloth to prevent streaks.

5.2 Cleaning Burners and Pan Supports

• Lift the burners and remove the cast iron pan supports.
• Wash pan supports and burner components with warm soapy water. For heavy grease, a degreaser can be used.
• Ensure all components are completely dry before reassembling. Blocked burner holes can affect flame quality.
• The liftable design makes cleaning underneath the burners easier.

Image: Liftable burners allow for easy cleaning of the hob surface.

6. Troubleshooting

If you encounter issues with your hob, refer to the following common problems and solutions:

• Burner does not ignite:
  • Check if the gas supply is open.
  • Ensure the control knob is pushed down and turned correctly.
  • Verify the ignition battery is not depleted (for battery-operated auto ignition).
  • Clean the burner cap and ignition pin for any food debris.
• Flame is weak or uneven:
  • Check if the burner holes are clogged. Clean them carefully.
  • Ensure the burner cap is correctly seated.
  • Verify adequate gas pressure.
• Flame goes out after releasing the knob (FFD activation):
  • Hold the knob down for a few extra seconds after ignition to allow the FFD sensor to heat up.
  • Ensure the FFD sensor is clean and not obstructed.

If the problem persists after attempting these solutions, contact Faber customer support or a qualified service technician.

7. Specifications

8. Warranty Information

Your Faber Hob Magiclift HT904 BR CI AI comes with the following warranty:

• Comprehensive Warranty: 2 Years
• Warranty on Glass: 5 Years
• Warranty on Burners & Valves: 5 Years

Please retain your purchase receipt and warranty card for any warranty claims. The warranty covers manufacturing defects under normal use conditions. For detailed terms and conditions, refer to the warranty card included with your product.

9. Customer Support

For any queries, service requests, or technical assistance, please contact Faber customer support:

• Customer Service Number: 1800-209-3484
• Manufacturer Address: 1086/1/2, SANASWADI, TAL - SHIRUR, PUNE - 412208, MAHARASHTRA, INDIA

You can also visit the official Faber website for more information and support resources.