HuBDIC FE-7207

Download PDF
Contents

HuBDIC HubiCare Leg Air Massager Instruction Manual

Model: FE-7207

Brand: HuBDIC

Introduction

The HuBDIC HubiCare Leg Air Massager is designed to provide pneumatic compression massage and heat therapy for your legs and feet. It features multiple airbags that inflate and deflate to promote circulation and relaxation, helping to alleviate minor pain, aid muscle recovery, and reduce swelling. This manual provides detailed instructions for safe and effective use of your device.

HuBDIC HubiCare Leg Air Massager with heat and compression

Image: The HuBDIC HubiCare Leg Air Massager, highlighting its air compression and heat features.

Safety Information

Please read all safety warnings and instructions before using this product to prevent injury or damage.

  • Be careful as massaging with too much intensity may cause strain to the muscles.
  • Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
  • Do not use the massager if you have any pre-existing medical conditions without consulting a healthcare professional.
  • Do not use on broken or swollen skin areas.
  • Keep out of reach of children.
  • Unplug the device when not in use and before cleaning.
  • The recommended usage time is less than 15 minutes per session. The device features a 20-minute automatic shut-off for safety.

Package Contents

Verify that all items are present in the package:

  • HuBDIC HubiCare Leg Air Massager (Pair)
  • Handheld Controller
  • Power Adapter
  • Storage Bag
  • User Manual (This document)
Package contents of HuBDIC HubiCare Leg Air Massager including massager boots, controller, and storage bag.

Image: The complete package contents of the HuBDIC HubiCare Leg Air Massager.

Product Overview

The massager consists of two main components: the leg wraps and the handheld controller.

Leg Wraps

Each leg wrap is designed to cover the foot and calf area, featuring multiple internal airbags for compression and a zipper for easy fitting. The wraps are made of durable polyester material.

Close-up of the leg massager wrap showing the zipper and material.

Image: Detail of the leg wrap with its convenient zipper closure.

Handheld Controller

The controller allows you to manage all functions of the massager, including power, massage modes, intensity levels, heat settings, and vibration.

Detailed view of the handheld controller with labeled buttons for modes, intensity, heat, and vibration.

Image: The handheld controller displaying its various function buttons.

  • Power Button: Turns the device ON/OFF.
  • Mode Button (M): Cycles through 6 massage modes (Auto, Pinch, Leg, Press, Foot, Relax).
  • Strength Button: Adjusts air pressure intensity (Min, Mid, Max).
  • Heat Button: Toggles heat levels (Low, High, Off).
  • Vibration Button: Adjusts vibration intensity (Level 1, Level 2, Level 3).

Setup

Follow these steps to properly set up your HuBDIC HubiCare Leg Air Massager:

  1. Wear the Leg Wraps:

    Sit comfortably. Place your foot into the massager wrap, ensuring your heel is properly seated. Wrap the Velcro straps securely around your foot and calf. Use the zipper for easy fitting and adjustment. Ensure the wraps are snug but not overly tight to allow for proper air compression.

    Video: Demonstrates how to correctly wear the leg massager wraps.

  2. Connect the Hose:

    Connect the air hose from the leg wraps firmly into the designated port on the handheld controller.

  3. Connect Power:

    Plug the power adapter into the controller and then into a standard electrical outlet.

Operating Instructions

Once set up, you can begin your massage session:

  1. Power On: Press the Power Button on the controller to turn on the device. The default mode will activate.
  2. Select Massage Mode: Press the "M" (Mode) Button to cycle through the 6 available massage modes:
    • Auto: Full leg and foot pressure massage.
    • Pinch: Focuses on pinching compression for calves and feet.
    • Leg: Targets only the calf area with pressure massage.
    • Press: Applies pressing compression to calves and feet.
    • Foot: Focuses only on the foot area with pressure massage.
    • Relax: Gentle compression for overall relaxation of calves and feet.
    Diagram showing the different massage modes and their target areas.

    Image: Visual representation of the six distinct massage modes.

  3. Adjust Intensity: Press the Strength Button to select your desired air pressure intensity: Min, Mid, or Max.
  4. Set Heat Level: Press the Heat Button to choose between Low heat, High heat, or turn heat Off. The heat function is primarily located in the foot area.
  5. Control Vibration: Press the Vibration Button to select one of three vibration levels (Level 1, Level 2, Level 3).
  6. Automatic Shut-off: The device will automatically turn off after 20 minutes of continuous use. This is a safety feature to prevent overuse. You can restart a session if desired.
  7. Power Off: Press the Power Button again to turn off the device manually at any time.
Image showing the controller with indicators for 3 intensities, 3 vibrations, and 6 modes.

Image: The controller interface highlighting options for intensity, vibration, and modes.

Maintenance

Cleaning

  • Always unplug the massager from the power outlet before cleaning.
  • Wipe the surface of the leg wraps and controller with a soft, damp cloth.
  • Do not use abrasive cleaners, solvents, or harsh chemicals.
  • Do not immerse the device or controller in water.

Storage

  • Store the massager in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Keep the device in its original packaging or the provided storage bag to protect it from dust and damage.
  • Avoid placing heavy objects on top of the massager during storage.

Troubleshooting

If you encounter any issues with your massager, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Device does not power on.Not properly plugged in; Power outlet issue; Controller not connected.Ensure power adapter is securely plugged into the controller and a working wall outlet. Check the connection of the air hose to the controller.
No compression or weak compression.Air hose not properly connected; Wraps not sealed; Low intensity setting.Verify the air hose is fully inserted into the controller. Ensure all Velcro straps and zippers on the wraps are securely fastened. Increase the intensity setting using the Strength button.
Heat function not working.Heat setting is Off or Low; Device malfunction.Press the Heat button to cycle through Low, High, and Off settings. Allow a few minutes for the heat to build up. If still not working, contact customer support.
Vibration not felt or too weak.Vibration setting is Off or Low.Press the Vibration button to cycle through the three levels.
Wraps feel too tight or uncomfortable.Intensity setting too high; Wraps applied too tightly.Reduce the intensity setting. Loosen the Velcro straps on the wraps slightly to ensure a comfortable fit before starting the massage.

Specifications

FeatureDetail
Model NumberFE-7207
Product Dimensions23 x 6.5 x 7 inches
Item Weight15.87 ounces (450 Grams)
MaterialPolyester
Power SourceCorded Electric
Use ForLegs (Foot and Calf)
Massage Modes6 (Auto, Pinch, Leg, Press, Foot, Relax)
Intensity Levels3 (Min, Mid, Max)
Heat Levels2 (Low, High) + Off
Vibration Levels3
Auto-off Timer20 minutes
ManufacturerHuBDIC
Country of OriginChina

Warranty and Support

HuBDIC products are manufactured with quality and care. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official HuBDIC website. Keep your purchase receipt for warranty claims.

For general inquiries or assistance, you may also contact the seller directly through the platform where the product was purchased.

© 2024 HuBDIC. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.