1. Introduction
Thank you for purchasing the GODOX V1Pro-NTTL Lithium-Ion Round Head Camera Flash. This professional-grade speedlight is designed to provide powerful, stable, and versatile lighting for various photographic needs. Featuring a unique round flash head, detachable sub-flash, and advanced charging options, the V1Pro-NTTL offers enhanced performance and flexibility. This manual will guide you through the setup, operation, and maintenance of your flash unit.

Figure 1.1: GODOX V1Pro-NTTL flash unit and included accessories. These include the VB30 lithium-ion battery, a dedicated charger, a USB-C charging cable, a small stand for off-camera use, and the innovative SU-1 detachable sub-flash.
2. Setup
2.1 Battery Installation
- Ensure the flash unit is powered off.
- Locate the battery compartment on the side of the flash body.
- Slide the battery compartment cover open.
- Insert the VB30 Lithium-Ion battery, ensuring the contacts align correctly.
- Close the battery compartment cover until it clicks securely into place.
2.2 Mounting on Camera
- Ensure your camera is powered off.
- Slide the V1Pro-NTTL's hot shoe foot into your camera's hot shoe mount.
- Rotate the locking ring on the flash unit clockwise until it is securely tightened. Do not overtighten.
2.3 Attaching the SU-1 Detachable Sub-Flash
- Locate the magnetic attachment point on the front of the V1Pro-NTTL flash head.
- Align the SU-1 sub-flash with the attachment point. The magnets will guide it into place.
- Ensure the SU-1 is firmly attached.

Figure 2.1: The GODOX V1Pro-NTTL with the SU-1 detachable sub-flash mounted. The SU-1 provides an additional fill light source, enhancing lighting flexibility.
3. Operating Instructions
3.1 Power On/Off
Press and hold the power button (usually marked with Ⓘ) for a few seconds to turn the flash on or off.
3.2 Mode Selection (TTL/M)
The V1Pro-NTTL supports both TTL (Through-The-Lens) automatic flash mode and Manual (M) flash mode. Use the dedicated TTL/M switch to toggle between these modes.

Figure 3.1: A close-up view of the TTL/M switch on the GODOX V1Pro-NTTL, allowing quick toggling between TTL automatic flash mode and Manual flash mode.
3.3 Adjusting Flash Head (Swivel/Tilt)
The round flash head offers extensive flexibility for direct or bounce lighting. It can swivel horizontally from 0° to 330° and tilt vertically from -7° to 120°. Gently adjust the flash head to your desired angle.

Figure 3.2: The GODOX V1Pro-NTTL flash head can rotate horizontally from 0° to 330° and vertically from -7° to 120°, allowing for versatile light positioning.
3.4 Using the LED Modeling Light
The V1Pro-NTTL features a built-in 2W LED modeling light with 10 adjustable levels. This light helps you preview the lighting effect before taking a shot. Refer to the flash's display and control dial for adjusting its intensity.

Figure 3.3: The GODOX V1Pro-NTTL flash with its integrated 2W LED modeling light active, assisting in previewing lighting effects.
3.5 Wireless Operation
The V1Pro-NTTL supports GODOX 2.4G wireless X system for both transmission and reception. This allows for seamless integration with other GODOX flashes and triggers for multi-flash setups. Consult the detailed wireless section in the full manual for advanced settings and group control.

Figure 3.4: This diagram illustrates the GODOX 2.4G wireless system, showing the V1Pro-NTTL integrating seamlessly with other GODOX flashes and triggers.
3.6 High-Speed Sync (HSS)
The V1Pro-NTTL supports High-Speed Sync (HSS) up to 1/8000s, allowing you to use flash at shutter speeds faster than your camera's native sync speed. This is ideal for freezing fast motion or overpowering bright ambient light.

Figure 3.5: An example photograph showcasing the High-Speed Sync (HSS) capability of the GODOX V1Pro-NTTL, allowing flash synchronization at shutter speeds up to 1/8000s.
4. Charging and Power Management
4.1 Battery Charging
The VB30 Lithium-Ion battery can be charged using the included VC26 charger or directly via the flash unit's Type-C USB port. Charging via Type-C offers convenience, especially when on the go.

Figure 4.1: This image highlights the charging options for the GODOX V1Pro-NTTL, including the VB30 battery, Type-C charging port, and the VC26 dedicated battery charger.
4.2 External Power Port
The V1Pro-NTTL is designed with an additional power port for seamless connection to external power packs like the GODOX PB960. This provides extended power solutions and faster recycling times for demanding shooting scenarios.

Figure 4.2: The GODOX V1Pro-NTTL flash connected to an optional GODOX PB960 external power pack, providing extended power and faster recycling times.
5. Maintenance
5.1 Cleaning
- Use a soft, dry cloth to clean the flash body.
- For the flash tube and modeling light, use a lens cleaning cloth and solution if necessary, ensuring no residue is left.
- Avoid using harsh chemicals or abrasive materials.
5.2 Battery Care
- Charge the battery fully before first use.
- Do not expose the battery to extreme temperatures.
- If storing for extended periods, charge the battery to approximately 50% and store in a cool, dry place.
5.3 Storage
When not in use, store the flash unit in a protective case in a cool, dry environment, away from direct sunlight and moisture.
6. Troubleshooting
6.1 Flash Not Firing
- Check if the flash is powered on and the battery is sufficiently charged.
- Ensure the flash is securely mounted on the camera's hot shoe.
- Verify camera and flash settings (e.g., flash mode, sync speed).
- If using wireless, check trigger and receiver settings.
6.2 Incorrect Exposure
- In TTL mode, ensure the flash exposure compensation is not set too high or low.
- In Manual mode, adjust the flash power output.
- Check camera ISO, aperture, and shutter speed settings.
- Ensure the flash head is pointed correctly (not blocked).
6.3 Overheating Protection
The V1Pro-NTTL features overheating protection. If the flash fires too rapidly, it may temporarily stop firing to prevent damage. Allow the unit to cool down before resuming use.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | GODOX |
| Product Model Number | YT-JP-V1Pro-N |
| Lens Mount | Hot Shoe Mount |
| Included Components | USB-C Charging Cable*1, Lithium Battery *1, Charger*1, Storage Bag*1, Camera Flash Stand*1, Detachable Sub-Flash SU-1*1, Flash Body*1 |
| Size | V1Pro-N |
| Package Dimensions | 23.62 x 19.54 x 9.64 cm; 1.4 kg |
| Flash Sync Speed | 1/8000s (HSS) |
| Mounting Type | Hot Shoe Mount |
8. Warranty and Support
GODOX products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official GODOX website. Keep your purchase receipt as proof of purchase for warranty claims.