Introduction
Thank you for purchasing the VECELO Armless Office Chair, model KHD-OC13-BGE. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.
Image: VECELO Armless Office Chair in a home office setting.
Safety Information
- Maximum Load Capacity: The static load capacity of this chair is approximately 160 kg (350 lbs). Do not exceed this weight limit to prevent damage or injury.
- Assembly: Ensure all parts are correctly assembled and tightened according to the instructions. Do not use the chair if any parts are missing or damaged.
- Stability: Use the chair on a flat, stable surface. Avoid standing on the chair or using it as a step stool.
- Cleaning: Clean the chair only by hand washing. Do not use harsh chemicals or abrasive cleaners.
- Children: Keep children away from the chair during assembly. Supervise children when they are near the chair to prevent accidents.
Product Overview
Dimensions
| Measurement | Value |
|---|---|
| Overall Width | Approx. 68 cm (26.8 inches) |
| Overall Depth | Approx. 51 cm (20.1 inches) |
| Overall Height | Approx. 85-95 cm (33.5-37.4 inches) |
| Seat Height | Approx. 44-54 cm (17.3-21.3 inches) |
| Product Weight | 13.2 kg (29.1 lbs) |
| Static Load Capacity | 160 kg (350 lbs) |
Image: Detailed dimensions of the chair.
Key Features
- Wide Seat Design: Features a high-density sponge and quality fabric for enhanced comfort and reduced fatigue during extended use.
- Ergonomic Backrest: Designed to fit the back, providing support and reducing strain on the lower back.
- Stable Cross-Leg Base: Equipped with a sturdy explosion-proof steel chassis for durability and safety.
- SGS Certified Gas Lift: Ensures reliable height adjustment and long-term durability.
- 360-Degree Swivel: Allows for easy rotation and flexibility in movement.
- Height Adjustable: Customize the seat height to your preference for optimal comfort.
Image: Details of the chair's base, tension, cylinder, and height adjustment.
Setup Instructions
This chair requires assembly. A Japanese instruction manual and assembly kit are included. Follow these general steps for assembly:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all components listed in the parts list are present.
- Attach Base to Gas Lift: Insert the gas lift cylinder into the center hole of the cross-leg base.
- Assemble Seat and Backrest: Connect the seat cushion to the backrest using the provided screws and tools. Ensure all screws are securely tightened.
- Connect Seat Assembly to Gas Lift: Place the assembled seat and backrest onto the gas lift cylinder. Apply gentle downward pressure to secure it.
- Final Check: Ensure all connections are tight and the chair is stable before use.
Image: Assembly diagram showing chair components.
Operating Instructions
Height Adjustment
- To raise the seat, lift the height adjustment lever while taking your weight off the seat. The seat will rise automatically.
- To lower the seat, lift the height adjustment lever while seated. The seat will lower under your weight. Release the lever at the desired height.
360-Degree Swivel
- The chair is designed to rotate 360 degrees, allowing for easy movement and access to your workspace without needing to reposition the entire chair.
Image: Examples of comfortable sitting postures on the chair.
Maintenance
- Cleaning: Wipe the chair with a soft, damp cloth. For stubborn stains, use a mild soap solution and then wipe with a clean, damp cloth. Do not machine wash or use harsh detergents.
- Inspection: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading or damage to the fabric.
- Storage: Store the chair in a dry, cool place when not in use for extended periods.
Troubleshooting
- Chair is Wobbly: Check all assembly screws and bolts. Ensure they are fully tightened. Verify the chair is on a flat, even surface.
- Height Adjustment Not Working: Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement. Contact customer support.
- Squeaking Noises: Apply a small amount of silicone-based lubricant to moving parts, such as the gas lift or base connections.
- Difficulty Assembling: Refer to the detailed assembly instructions provided in the package. If parts are missing or damaged, contact customer support for assistance.
Specifications
| Attribute | Detail |
|---|---|
| Brand | VECELO |
| Model Number | KHD-OC13-BGE |
| Color | Beige |
| Material | Alloy Steel (Frame), Foam (Seat) |
| Product Dimensions (D x W x H) | 71.5 x 65.5 x 98 cm (Overall) |
| Seat Height Range | 44-54 cm |
| Product Weight | 13.2 kg |
| Maximum Recommended Weight | 160 kg |
| Arm Style | Armless |
| Leg Style | Cross-leg (No Wheels) |
| Special Features | Ergonomic, Height Adjustable, 360-Degree Swivel |
| Assembly Required | Yes |
| Included Components | Chair x1, Assembly kit x1, Instruction manual x1 |
| UPC | 840408909556 |
Warranty and Support
VECELO prioritizes customer satisfaction and offers the following:
- 1-Year Free Parts Replacement: In the event of manufacturing defects or component failure within one year of purchase, VECELO provides free replacement parts.
- 30-Day Return Policy: If you are not satisfied with your purchase, you may be eligible for a return within 30 days.
- Customer Service: For any initial defects, missing parts, damage, or other inquiries, please contact VECELO customer service. Contact information can typically be found on the product packaging or the official VECELO website.
