VASAGLE Accent Chair Instruction Manual

Introduction

Thank you for choosing the VASAGLE Accent Chair, Model ULAC017Q01. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

This accent chair features a shell-shaped back, wide seat, and metal legs, designed for comfort and versatility in various indoor settings.

Safety Information

• Do not exceed the maximum weight recommendation of 300 pounds (136 kg). Sudden movements or dynamic loads may cause instability.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Keep small parts away from children during assembly to prevent choking hazards.
• Use the chair on a flat, stable surface to prevent tipping.

Package Contents

Before assembly, please verify that all components listed below are present:

• 1 x Accent Chair (Main Body)
• 1 x Accessory Kit (containing screws, washers, and tools)
• 1 x Instructions Manual (this document)

Setup and Assembly

The VASAGLE Accent Chair is designed for straightforward assembly. Follow these steps carefully:

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Identify the main chair body (A) and the four metal legs (B).
3. Attach each metal leg (B) to the designated mounting points on the underside of the chair body (A) using the screws and tools provided in the accessory kit. Ensure the legs are oriented correctly as shown in the diagram.
4. Tighten all screws firmly. Do not overtighten.
5. Once all legs are attached, carefully turn the chair upright.

This living room chair is effortless to assemble with clear instructions and labeled parts.

Operating Instructions

Your VASAGLE Accent Chair is ready for use once assembled. It is designed for comfortable seating in various indoor environments.

• Seating: The chair offers a spacious 22-inch wide seat and a supportive shell-shaped back for comfort.
• Placement: This versatile chair can be integrated into living rooms, bedrooms, dressing areas, vanity rooms, or offices.
• Weight Capacity: The chair is built with a sturdy plywood frame and metal legs, supporting up to 300 pounds (136 kg).

Product Video

Video 1: An overview of the VASAGLE Velvet Vanity Chair, Model LAC017, highlighting its features and design.

Maintenance

Proper care will extend the life and appearance of your accent chair.

• Cleaning: Wipe the chair with a soft, dry cloth. Avoid harsh chemicals or abrasive cleaners that may damage the velvet fabric or metal finish.
• Spills: For spills, blot immediately with a clean, dry cloth. Do not rub.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric.
• Inspection: Periodically inspect all connections and re-tighten hardware as needed to maintain stability.

Troubleshooting

If you encounter any issues with your VASAGLE Accent Chair, please refer to the following common solutions:

• Wobbly Chair: Ensure all leg attachment screws are fully tightened. Check that the chair is placed on an even surface.
• Difficulty with Screw Insertion: If screws are difficult to insert, ensure proper alignment of the leg with the mounting hole. Do not force screws; gently adjust the leg position.
• Missing Parts: If any parts are missing from the package, please contact customer support immediately.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the purchase documentation or contact VASAGLE customer service directly. Contact details can typically be found on the manufacturer's official website or through your retailer.