Introduction
This manual provides essential information for the setup, operation, and maintenance of your ECONTROLLY AH81-15047A Replacement Remote Commander. This remote is designed to be compatible with a wide range of Samsung Soundbar and Subwoofer Home Theater Systems, offering a direct replacement for lost or damaged original remotes without requiring complex programming.
Compatibility
The ECONTROLLY AH81-15047A remote is compatible with the following Samsung Soundbar and Subwoofer models. It also serves as a substitute for AH81-15498A and AH81-15340A remotes.
- HW-B Series: HW-B450, HW-B430, HW-B440, HW-B43M, HW-B43C, HW-B47M, HW-B45E, HW-B550/ZA, HW-B550, HW-B650, HW-B750D, HW-B750D/ZA
- HW-S Series: HW-S60B, HW-S61B, HW-S60B/ZA, HW-S61B/ZA, HW-S60D, HW-S60D/ZA
- HW-Q Series: HW-Q750B, HW-Q800B, HW-Q600B, HW-Q60B, HW-Q67CB, HW-Q6CB, HW-Q700B, HW-Q710B, HW-Q810B, HW-Q910B, HW-Q930B, HW-Q935B, HW-Q990B, HW-Q800B/ZA, HW-Q700B/ZA, HW-Q930B/ZA, HW-Q910B/ZA, HW-Q990B/ZA
- Other Models: PS-WB40T, SWA-9100, HW-C450, HW-B57C
Video: Overview of the ECONTROLLY AH81-15047A remote and its compatibility with various Samsung Soundbar series.
Setup
The ECONTROLLY AH81-15047A remote requires no programming or pairing. Simply install batteries to begin use.
- Battery Installation: Locate the battery compartment on the back of the remote. Slide the battery cover downwards to open. Insert two (2) new 1.5V AAA alkaline batteries, ensuring correct polarity (+/-). Close the battery cover by sliding it back into place until it clicks.
- Initial Use: Once batteries are installed, the remote is ready for immediate use with compatible Samsung Soundbar systems.
Image: The ECONTROLLY AH81-15047A remote with its battery compartment open, indicating the need for two AAA batteries.
Video: Demonstration of the ECONTROLLY AH81-15047A remote, including battery installation and a close-up of its buttons.
Operating Instructions
The remote features an ergonomic design with clearly labeled buttons for intuitive control of your Samsung Soundbar. Below are the primary functions:
Image: Front view of the ECONTROLLY AH81-15047A remote, highlighting its button layout.
- Power Button (⏻): Turns the soundbar on or off.
- Input Button (⎚): Cycles through available input sources (e.g., HDMI, Optical, Bluetooth).
- Pair Button (Ⓑ PAIR): Initiates Bluetooth pairing mode for connecting devices.
- Play/Pause Button (▷‖): Controls media playback (play, pause).
- Volume Control (+/-): Adjusts the main volume level of the soundbar.
- Mute Button (🔇): Mutes or unmutes the sound.
- Sound Mode Button: Cycles through various sound modes (e.g., Standard, Surround, Game).
- Information Button (ⓘ): Displays information about the current soundbar status or settings.
- Woofer Control: Adjusts the subwoofer level.
- CH LEVEL (Channel Level): Adjusts individual channel levels.
- Settings Button (⚙): Accesses soundbar settings.
- TONE CONTROL: Adjusts bass and treble settings.
Maintenance
To ensure optimal performance and longevity of your remote:
- Keep the remote clean by wiping it with a soft, dry cloth.
- Avoid exposing the remote to extreme temperatures, humidity, or direct sunlight.
- Do not drop the remote or subject it to strong impacts.
- If the remote will not be used for an extended period, remove the batteries to prevent leakage.
Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new 1.5V AAA alkaline batteries.
- Ensure there are no obstructions between the remote and the soundbar's infrared receiver.
- Specific functions not working:
- Verify that your soundbar model is listed in the compatibility section.
- Some advanced functions may require specific soundbar firmware or settings. Refer to your soundbar's original manual for details.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 6.3 x 1.57 x 0.39 inches |
| Item Weight | 3.2 ounces |
| Item Model Number | SENUO-AH81-15047A |
| Brand | ECONTROLLY |
| Color | Black |
| Power Source | 2 x 1.5V AAA Alkaline Batteries (Not Included) |
| Special Feature | Ergonomic |
Warranty
This product typically comes with a 1-year warranty. Please retain your purchase receipt for warranty claims. For specific warranty details, refer to the seller's policy or contact customer support.
Support
For further assistance or inquiries regarding your ECONTROLLY AH81-15047A Replacement Remote Commander, please refer to the retailer's customer service or the manufacturer's official support channels. Ensure you have your product model number (SENUO-AH81-15047A) and purchase details available when seeking support.