SEAOURA SR-520 2-in-1 Aquarium Magnetic Cleaner with Digital Thermometer User Manual

1. Product Overview

The SEAOURA SR-520 is a versatile 2-in-1 aquarium cleaning tool designed for glass tanks. It combines a powerful magnetic algae scraper with an integrated digital thermometer, providing both efficient cleaning and accurate temperature monitoring. Its compact, floating design ensures ease of use and minimal disturbance to your aquatic environment.

Figure 1: SEAOURA 2-in-1 Aquarium Magnetic Cleaner with Digital Thermometer.

2. Key Features

• Accurate Temperature Monitoring: Integrated digital thermometer with a monitoring range of 0℉ to 99℉ (±0.9°F accuracy). Press and hold for 3 seconds to switch between Fahrenheit and Celsius.
• Strong Magnetic Adhesion: Ensures the cleaner stays firmly attached to the glass, suitable for glass tanks with a thickness less than 1/2 inch (12.7mm). Recommended for 1-30 gallon tanks.
• Efficient Cleaning: Features both an abrasive Velcro pad for tough stains and a soft fluff pad for wiping away dust and minor traces, ensuring thorough, scratch-free cleaning.
• Floating Design: The internal part floats if detached, preventing it from sinking to the tank bottom and allowing for easy retrieval without getting your hands wet.
• Compact and User-Friendly: Ultra-mini, space-saving design that is easy to operate and move around the tank.

Figure 2: Digital thermometer displaying temperature range and sensor location.

Figure 3: Illustration of the strong magnetic force and tank compatibility.

3. Setup Instructions

3.1 Battery Installation

The device requires 1 CR2032 battery (included). To install or replace the battery:

1. Gently pull the battery compartment cover upwards from the main unit.
2. Remove the old battery (if any) and insert a new CR2032 battery with the positive (+) side facing up.
3. Align the cover and push it downwards until it clicks securely into place.

Figure 4: Step-by-step guide for battery replacement.

3.2 Initial Placement in Aquarium

Ensure your tank is made of glass and has a thickness of less than 1/2 inch (12.7mm). This cleaner is not suitable for acrylic or plastic aquariums.

1. Submerge the inner brush part (with the abrasive Velcro) into the aquarium water.
2. Place the outer magnetic part (with the digital display) on the exterior of the glass, aligning it with the submerged inner part. The strong magnets will attract and hold the two parts together.
3. The cleaner is now ready for use. It can be moved flexibly across the glass without falling off.

Figure 5: Steps for attaching the magnetic cleaner to the aquarium glass.

4. Operating Instructions

4.1 Cleaning the Aquarium Glass

Once the cleaner is attached to the glass, simply move the outer part across the exterior of the tank. The inner part will mirror its movements, effectively scrubbing away algae and debris from the inside surface.

• Use the abrasive Velcro pad (inner part) for tackling tough stains, deposits, or grime on the interior glass.
• The soft fluff pad (outer part) helps to wipe away dust and minor traces on the exterior, preventing scratches.
• The ergonomic design allows for a comfortable grip, making it easy to maneuver the brush around corners and edges.

Figure 6: Demonstrating comprehensive cleaning of the aquarium.

Figure 7: Detail of the internal abrasive Velcro and external soft fluff pad.

4.2 Using the Digital Thermometer

The digital display on the outer unit shows the current water temperature. The temperature sensor is located on the backside of the inner unit, ensuring accurate readings from within the tank.

• To turn on the display, simply touch the power button icon.
• To switch between Fahrenheit (℉) and Celsius (℃), press and hold the power button icon for 3 seconds.

5. Maintenance

5.1 Cleaning the Cleaner

After each use, it is recommended to rinse both parts of the magnetic cleaner with clean water to remove any accumulated debris or algae. This helps maintain its effectiveness and prolong its lifespan.

5.2 Battery Replacement

Refer to Section 3.1 for detailed instructions on how to replace the CR2032 battery when the display becomes dim or stops working.

5.3 Storage

Store the magnetic cleaner in a dry place when not in use. Ensure the two magnetic parts are kept together to prevent loss and maintain magnetic strength.

6. Troubleshooting

• Cleaner detaches or falls: Ensure your tank is made of glass and its thickness is less than 1/2 inch (12.7mm). The magnetic force may not be sufficient for thicker glass or non-glass materials (acrylic/plastic).
• Ineffective cleaning: For stubborn algae, ensure the abrasive Velcro pad is clean and making full contact with the glass. Repeated passes may be necessary.
• Thermometer display is off or dim: Replace the CR2032 battery as per Section 3.1.
• Incorrect temperature unit: Press and hold the power button icon for 3 seconds to switch between Fahrenheit and Celsius.

Figure 8: The floating design prevents the inner part from sinking if detached.

7. Specifications

Figure 9: Product dimensions and compatibility notes.

8. Warranty and Support

8.1 Warranty Information

This product comes with a Two-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For any questions, concerns, or technical assistance, please contact SEAOURA customer support through the retailer where the product was purchased. You may also visit the official SEAOURA store on Amazon for additional product information and support resources.

Note: Always refer to the latest product information and support channels provided by the manufacturer.