1. Introduction
This manual provides essential information for the Husky 718 Toolbox Replacement Key. This key is specifically designed to replace lost or damaged keys for Husky toolboxes within the 701-725 series.
An image of the Husky 718 Toolbox Replacement Key, a silver-colored metal key with the number '701' stamped on its head, indicating its series compatibility.
2. Key Identification
To ensure you have the correct replacement key, it is crucial to verify the lock code. The lock code for your toolbox will be stamped on your original key or directly on the face of the lock cylinder if the original key is unavailable.
This replacement key is specifically for CHICAGO / HUSKY (GCODE / FRAMON / LASER CUT) toolbox locks, also known as WORKBOX or OLD STYLE toolbox locks, within the 701-725 series.
The key is custom cut on a 1041X key blank.
3. Usage Instructions
Insert the Husky 718 replacement key fully into the lock cylinder of your compatible toolbox. Turn the key clockwise or counter-clockwise as required to lock or unlock the mechanism. Ensure the key is fully inserted before turning to prevent damage to the key or the lock.
4. Care and Maintenance
Cleaning: Wipe the key with a dry, soft cloth to remove dirt or debris. Avoid using abrasive cleaners or solvents.
Storage: Store the key in a dry place to prevent rust or corrosion.
Handling: Avoid bending or forcing the key, as this can damage its structure and render it unusable.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Key does not insert fully into lock. | Obstruction in lock cylinder or incorrect key. | Check for debris in the lock. Verify the lock code on your toolbox matches the key series (701-725). |
| Key inserts but does not turn. | Lock mechanism is jammed, or key is slightly misaligned. | Gently jiggle the key while applying slight turning pressure. Do not force the key. Ensure the lock is not seized due to lack of lubrication or damage. |
| Key feels loose or wobbly in lock. | Worn lock cylinder or incorrect key. | Verify the lock code. If the lock cylinder is old or damaged, it may need replacement. |
6. Specifications
Product Type: Replacement Key
Series Compatibility: Husky Toolbox Key Series 701-725
Key Blank Type: 1041X
Weight: 0.247 ounces
Manufacturer: Husky
7. Support and Contact Information
For further assistance or inquiries regarding your Husky 718 Toolbox Replacement Key, please contact the seller or manufacturer directly.
Seller: EasyKeys Inc. USA
Manufacturer: Husky
For general information, you may visit the EasyKeys Store on Amazon.
