EasyKeys Toolbox Replacement Key for Kennedy T003 Instruction Manual

1. Introduction

This manual provides instructions for the EasyKeys Toolbox Replacement Key, specifically designed for Kennedy toolboxes requiring the T003 key code. This custom-cut key is manufactured from durable brass to ensure reliable operation and longevity. Please read this manual carefully to ensure proper identification and use of your replacement key.

Image 1: The EasyKeys T003 Replacement Key. This image displays the custom-cut brass key with the T003 code visible on its head.

2. Key Identification and Ordering

To ensure you receive the correct replacement key, it is crucial to accurately identify the lock code associated with your Kennedy toolbox. The T003 key is specific to Kennedy locks marked with this code.

2.1 Locating Your Lock Code

Your lock code can typically be found in one of the following locations:

• On the Original Key: If you have an existing key, the code is often stamped directly on the key head.
• On the Lock Face: The code may be engraved or printed on the visible part of the lock cylinder.
• On a Label Inside/Behind the Lock: For some toolboxes, the code is on a sticker or label located inside the toolbox drawer or on the lock mechanism itself, which may require opening the drawer or panel.
• On the Cabinet/Door Label: Less common for toolboxes, but some furniture items have codes on labels affixed to the cabinet or door.

Image 2: Diagram illustrating common locations for lock codes, including on the key, lock face, inside the lock, and on a cabinet label.

Important Considerations:

• Manufacturer Specificity: Lock codes are specific to the manufacturer. A T003 key for Kennedy will not work for another brand, even if the code appears similar.
• Key Cut Variations: Even if codes look similar across different brands, the actual key cuts (bitting) vary significantly by manufacturer. Always verify the brand.

3. Operating Instructions

Using your EasyKeys T003 replacement key is straightforward:

1. Insert the Key: Gently insert the T003 key into the lock cylinder of your Kennedy toolbox. Do not force the key.
2. Turn to Unlock: Once fully inserted, turn the key clockwise (or counter-clockwise, depending on the lock mechanism) to unlock the toolbox. You should feel a distinct click as the lock disengages.
3. Remove the Key: After unlocking, you may remove the key. For some locks, the key can only be removed in the locked position.
4. To Lock: Close the toolbox drawer or lid. Insert the key, turn it in the opposite direction until the lock engages, and then remove the key.

4. Maintenance and Care

Proper care of your replacement key and toolbox lock will ensure long-lasting performance:

• Keep Clean: Avoid exposing the key to dirt, dust, or corrosive substances. Clean with a soft, dry cloth if necessary.
• Lubrication: If the lock mechanism becomes stiff or difficult to turn, apply a small amount of graphite lubricant (not oil-based lubricants) into the keyway.


Image 3: A tube of graphite lubricant, recommended for maintaining lock mechanisms.

• Avoid Bending: Do not use excessive force or attempt to bend the key, as this can damage it and the lock.
• Storage: Store your spare key in a safe, accessible location, away from extreme temperatures or moisture.

5. Troubleshooting

If you encounter issues with your replacement key, consider the following:

• Key Does Not Insert Fully:
  • Check for obstructions in the keyway (e.g., debris).
  • Ensure the key is oriented correctly.
• Key Inserts but Does Not Turn:
  • Verify that the key code (T003) matches the lock code precisely.
  • Apply graphite lubricant to the lock mechanism.
  • Gently jiggle the key while applying slight turning pressure. Do not force.
• Lock Is Stiff:
  • Lubricate the lock with graphite.
  • Ensure the toolbox drawer/lid is not misaligned or putting pressure on the lock.

If problems persist, contact EasyKeys customer support for assistance.

6. Specifications

7. Warranty and Support

EasyKeys products are designed for reliability. While specific warranty details are not provided in this manual, EasyKeys guarantees its orders. For any questions, issues, or support needs, please contact the EasyKeys US-based support team. Refer to the EasyKeys website or your purchase documentation for contact information.

For further assistance, you may visit the EasyKeys Store on Amazon.