Introduction
This manual provides essential information for the safe and efficient operation of your PoolMr Cordless Handheld Pool Vacuum. Designed for versatility, this rechargeable cleaner is ideal for various pool types, including inground pools, above ground pools, spas, and hot tubs. Its powerful suction and cordless design ensure a thorough and convenient cleaning experience.
The PoolMr Cordless Handheld Pool Vacuum, showcasing its main unit and telescopic pole, designed for underwater cleaning.
Important Safety Instructions
To ensure safe operation and prevent damage to the product, please read and adhere to the following safety guidelines:
- Keep away from children: This device is not a toy and should be stored out of reach of children.
- Avoid hazardous liquids: Do not vacuum corrosive, flammable, or combustible liquids such as gasoline. Do not operate in the presence of explosive or flammable fumes.
- Maintain clear openings: Never insert or drop any object into any opening on the device. Keep all openings free of leaves, rocks, or anything that may reduce water flow.
- Power off before maintenance: Always turn off the device and unplug it from the charger before cleaning, filter replacement, or any routine maintenance.
- Handle with dry hands: Do not charge the product with wet hands or bare feet. Do not touch the product with wet hands or bare feet while charging.
- Protect from sharp objects and heat: Keep the machine and charger away from sharp objects or hot surfaces.
- Submersion requirement: The pool vacuum cleaner must be completely immersed in water within 60 seconds of start-up. The water intake must also be immersed in water; otherwise, it will stop working after 60 seconds to safeguard the engine. A blue indicator light signifies normal operation.
- Care when removing from water: Due to the weight of the vacuum when out of water, it is recommended to pick it up slowly to avoid damaging the product or the extension pole with excessive force.
- Proper storage: When not in use, store the pool vacuum cleaner in a cool, dry place, away from direct sunlight. It is recommended to charge it every 3 months to ensure battery performance.
Package Contents
Verify that all components are present and in good condition:
- Cordless Handheld Pool Vacuum Unit
- 65-inch Aluminum Telescopic Pole (adjustable)
- 10.5-inch Rectangular Brush Head
- Suction Head (for tight spots)
- High-Density Trash Can (125um filtration accuracy)
- Charger
- User Manual (this document)
The main components of the PoolMr pool vacuum, including the motor unit, extendable pole, and interchangeable cleaning heads.
Assembly and Initial Setup
The PoolMr Cordless Handheld Pool Vacuum is designed for quick and easy assembly, typically taking about 3 minutes.
- Charge the Battery: Before first use, fully charge the vacuum's internal 2500mAh lithium battery. Charging typically takes 4 to 5 hours. The charging port is located on the main unit and should be securely closed with its cover before submersion.
- Attach the Telescopic Pole: Connect the aluminum telescopic pole to the main vacuum unit. The pole is adjustable up to 65 inches to reach various depths and areas of your pool. Twist the locking mechanisms on the pole to extend or retract it to your desired length, then secure them firmly.
Video: Assembling and extending the telescopic pole for the PoolMr vacuum.
- Select and Attach Cleaning Head: Choose between the 10.5-inch rectangular brush head for general cleaning of floors, stairs, and corners, or the suction head for tight spots and floating debris. Securely attach the chosen head to the end of the vacuum unit.
Operating Your Pool Vacuum
Follow these steps for effective pool cleaning:
- Power On: Once the vacuum is assembled and ready, locate the power switch on the main unit. Flip the switch to the 'ON' position.
- Submerge Completely: Immediately after powering on, fully immerse the entire vacuum unit into the water within 60 seconds. Ensure the water intake is also submerged. The unit will automatically stop if not fully submerged within this timeframe to protect the motor. A blue indicator light will confirm normal operation.
Video: Submerging and operating the PoolMr vacuum.
- Begin Cleaning: Guide the vacuum along the pool floor, walls, and steps. The powerful 30W motor and 16 GPM flow rate will efficiently pick up debris such as twigs, leaves, dirt, and sand.
A person demonstrates using the PoolMr vacuum to clean the pool floor, effectively removing debris.
The PoolMr vacuum being used to clean a hot tub, highlighting its versatility for smaller water bodies.
- Runtime: The vacuum provides up to 60 minutes of continuous runtime on a full charge, allowing ample time to clean most pools.
- Temperature Range: The unit operates effectively in water temperatures ranging from 32°F (0°C) to 104°F (40°C).
- Power Off: After cleaning, remove the vacuum from the water and immediately turn off the power switch. The unit will automatically stop within 60 seconds of leaving the water as a safety measure.
Maintenance and Care
Regular maintenance ensures optimal performance and extends the lifespan of your vacuum.
- Empty and Clean the Trash Can: After each use, detach the high-density trash can and empty collected debris. Rinse the filter and the trash can thoroughly with clean water.
Video: Cleaning the filter and debris basket.
- Rinse the Unit: Rinse the exterior of the vacuum unit and the cleaning heads with fresh water to remove any pool chemicals or residue.
- Dry Thoroughly: Allow all components to air dry completely before reassembling and storing.
- Storage: Store the vacuum in a cool, dry place, away from direct sunlight.
Video: Storing the PoolMr vacuum.
- Battery Maintenance: If storing for extended periods, charge the battery every 3 months to maintain its performance and lifespan.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on or stops after 60 seconds. | Not fully submerged in water within 60 seconds of startup. | Ensure the entire unit, including the water intake, is fully immersed immediately after turning on. |
| Reduced suction power. | Clogged trash can/filter; low battery. | Empty and clean the trash can and filter. Recharge the battery fully. |
| Short operating time. | Battery not fully charged; aging battery. | Ensure battery is fully charged (4-5 hours). If battery life significantly degrades, contact support. |
| Unit is difficult to maneuver. | Pole not extended or locked properly; debris caught in brush head. | Adjust and lock the telescopic pole to a comfortable length. Check and clear any debris from the brush head. |
Product Specifications
- Model: SH
- Power Source: DC (Rechargeable Battery)
- Battery: 2500mAh Lithium Battery (3 AAA batteries required, included)
- Charging Time: 4-5 hours
- Runtime: Up to 60 minutes
- Motor Power: 30W
- Max Flow Rate: 16 gallons per minute (50 liters/min)
- Filtration Accuracy: 125um
- Trash Box Capacity: 1.3 Liters
- Telescopic Pole Length: Up to 65 inches (aluminum)
- Product Dimensions: 9.46 x 5.85 x 30.61 inches
- Item Weight: 8.88 pounds
- Material: Hard plastic, Nylon with fiber, Polycarbonate resin, Polypropylene, Aluminum tube
- Color: Gray
- Operating Temperature: 32°F (0°C) to 104°F (40°C)
Warranty and Support
Your PoolMr Cordless Handheld Pool Vacuum comes with a 1-Year Warranty. For warranty claims, technical support, or any inquiries regarding your product, please contact PoolMr customer service through the Amazon platform or visit the official PoolMr Store.
Visit the PoolMr Store on Amazon
You can also refer to the official User Manual (PDF) for additional details: Download User Manual (PDF)
