Tribesigns F1745
Tribesigns 63-inch Computer Desk with Storage Shelf (Model F1745) Instruction Manual
Comprehensive guide for assembly, use, and maintenance of your Tribesigns computer desk.
Introduction
Thank you for choosing the Tribesigns 63-inch Computer Desk with Bottom Storage Shelf. This manual provides detailed instructions for the safe assembly, proper use, and effective maintenance of your new desk. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image: The Tribesigns 63-inch Computer Desk in a typical office environment.
Important Safety Information
Please observe the following safety guidelines to prevent injury or damage to the product:
- Always assemble the desk on a stable, level surface.
- Use caution when handling the metal panel to avoid injury.
- Do not place heavy objects on the desk that could cause it to tip over.
- Keep small parts and packaging materials away from children.
Parts List
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer service.
(Note: A detailed parts diagram is typically included in the physical manual. Refer to your packaging for specific component identification.)

Image: Key components including the desktop, metal frame, and adjustable feet.
Assembly Instructions
Assembly is straightforward and typically takes less than 20 minutes. It is recommended to have two people for easier assembly.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Identify Hardware: Separate and identify all screws, bolts, and tools provided.
- Attach Legs to Desktop: Secure the metal leg frames to the underside of the desktop using the provided hardware. Ensure all connections are firm but do not overtighten initially.
- Install Bottom Storage Shelf: Attach the bottom storage shelf to the designated supports on the leg frames.
- Secure Metal Panel: Fasten the metal privacy panel between the leg frames. This panel also provides structural support.
- Final Tightening: Once all components are loosely assembled, gradually tighten all screws and bolts until secure. Avoid overtightening to prevent stripping.
- Adjust Leveling Feet: Place the desk in its desired location. Adjust the leveling feet at the bottom of the legs to ensure the desk is stable and level on uneven floors.

Image: Assembled desk in a typical office environment.
Operating Instructions
This desk is designed for use as a computer workstation, writing table, or general office desk. Its large surface area and bottom storage shelf provide ample space for various tasks.
- Weight Distribution: Distribute weight evenly across the desktop. Avoid concentrating heavy items in one small area.
- Storage Shelf Use: The bottom storage shelf is suitable for books, office supplies, and other items. Do not overload the shelf beyond its capacity.
- Placement: Position the desk in a location that allows for comfortable use and easy access to power outlets if using electronic devices.

Image: Desk in use, showcasing the spacious desktop and functional storage shelf.
Maintenance and Care
To ensure the longevity and appearance of your desk, follow these maintenance guidelines:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Spills: Clean up spills immediately to prevent staining or damage to the engineered wood desktop.
- Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or warping of the desktop material.
Troubleshooting
If you encounter any issues with your desk, refer to the following common solutions:
- Desk is Wobbly:
- Ensure all assembly screws and bolts are securely tightened.
- Adjust the leveling feet on the bottom of each leg to stabilize the desk on uneven floors.
- Missing Parts or Damaged Components:
- Carefully re-check all packaging materials.
- Contact Tribesigns customer service immediately for assistance.
Product Specifications
| Brand | Tribesigns |
| Model Number | F1745 |
| Product Dimensions (D x W x H) | 31"D x 63"W x 30"H |
| Desktop Thickness | 1.2 inches |
| Material | Engineered Wood (Desktop), Metal (Base) |
| Color | Walnul (Desktop), Silver/Gray (Base) |
| Item Weight | 80 Pounds |
| Number of Shelves | 1 (Open Shelf) |
| Assembly Required | Yes |
| Recommended Assembly People | 2 |

Image: Detailed dimensions of the desk.
Warranty and Customer Support
Tribesigns products come with a Limited Warranty. For specific details regarding your warranty coverage, please refer to the documentation included with your purchase or visit the official Tribesigns website.
If you encounter any issues such as damaged or defective items, or missing accessories, please contact our customer service team for prompt assistance. We are committed to providing friendly and helpful support.
Contact Information: Please refer to your purchase receipt or the Tribesigns official website for the most current customer service contact details.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







