Westinghouse Electric Blanket King Instruction Manual

Introduction

Thank you for choosing the Westinghouse Electric Blanket King. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new electric blanket. Please read all instructions carefully before use and retain this manual for future reference.

This electric blanket is designed to provide quick and consistent warmth with its high-quality heating wires, densely and evenly distributed throughout. It features a dual-sided design with ultra-soft flannel on one side and cozy sherpa fleece on the other for enhanced comfort and insulation.

Setup

1. Unpack: Carefully remove the electric blanket and controller from its packaging.
2. Inspect: Check the blanket and power cord for any signs of damage. Do not use if damaged.
3. Connect Controller: Locate the connector on the blanket and firmly plug in the control unit. Ensure a secure connection.
4. Position Blanket: Lay the electric blanket flat on your bed, ensuring it is not folded, bunched, or tucked under the mattress. The heating wires should be evenly spread.
5. Plug In: Plug the power cord into a standard 120V AC, 60Hz electrical outlet.

Operating Instructions

The Westinghouse electric blanket features a user-friendly digital controller for easy operation.

1. Power On/Off: Press the power button on the controller to turn the blanket on or off.
2. Adjust Heat Levels: Use the '+' and '-' buttons to select one of the 10 available heat levels. The current heat level will be displayed on the digital screen.
3. Set Timer: Press the 'TIME' button to cycle through the available timer settings, ranging from 1 to 12 hours. The selected duration will be displayed. The blanket will automatically shut off after the set time.
4. Automatic Shut-off: The blanket is equipped with an automatic shut-off feature designed to complement manual shut-off, enhancing safety and energy efficiency.

Usage Scenarios

The versatile design makes this electric blanket perfect for various uses:

• On the bed for a warm night's sleep.
• On the sofa for cozy relaxation.
• Wrapped around your shoulders or knees for targeted warmth.

Video: Westinghouse Heated Blanket Features

Maintenance

Proper care ensures the longevity and performance of your electric blanket.

1. Before Cleaning: Always turn off and unplug the electric blanket from the wall outlet. Disconnect the control unit(s) from the blanket. Allow the blanket to cool completely.
2. Machine Wash: The blanket is machine washable. Use a gentle cycle with cold water.
3. Drying: Tumble dry on low heat or air dry. Ensure the blanket is completely dry before reconnecting the controller or using it.
4. Do Not Iron: Do not iron the electric blanket as this can damage the internal heating elements.
5. Do Not Dry-clean: Do not dry-clean the electric blanket.

Video: Machine Washable Feature

Troubleshooting

If your electric blanket is not functioning as expected, please refer to the following common issues and solutions:

• Blanket Not Heating:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Verify that the control unit is firmly connected to the blanket.
  • Check if the power button on the controller is pressed and a heat level is selected.
  • The automatic shut-off feature may have activated. Try turning the blanket off and then on again.
• Uneven Heating:
  • Ensure the blanket is laid flat and not bunched or folded, which can impede heat distribution.
• Controller Display Not Working:
  • Check the power connection to the wall outlet and the blanket.
  • If the issue persists, contact customer support.

Important Safety Note: The blanket features an overheat protection system to ensure your safety. If the blanket becomes too hot, it will automatically shut off. This is a normal safety function.

Specifications

Warranty and Support

Westinghouse provides a good after-sales guarantee for this electric blanket. If you encounter any issues or have questions regarding your product, please do not hesitate to contact our customer support team. We are always here to help you.

For further assistance, please refer to the contact information provided with your purchase documentation or visit the official Westinghouse website.

Important Safety Information

• Always turn off and unplug the electric blanket when not in use.
• Do not use the blanket if it is wet or damp.
• Do not use with infants, incapacitated persons, or persons insensitive to heat.
• Avoid pinching or creasing the heating wires.
• Do not insert pins or other sharp objects into the blanket.
• Keep pets away from the electric blanket to prevent damage to the heating elements.
• This product is ETL and FCC certified, ensuring it meets recognized safety standards.